Owner's Manual

Using the Port Replicator
8
Using two external monitors
To connect two external monitors:
1 Connect a monitor to the DVI port on the port replicator.
2 Connect a monitor to the monitor port on the port
replicator.
3 Turn on the notebook.
4 Connect the notebook to the port replicator.
Using the ATI video driver
Use the following procedure if your notebook uses the ATI
video driver.
To use two external monitors with ATI video:
1 In Windows Vista, click (Start), All Programs,
Catalyst Control Center, then click CCC. The Catalyst
Control Center opens.
-OR-
In Windows XP, click Start, All Programs, Catalyst
Control Center, then click Catalyst Control Center.
The Catalyst Control Center opens.
2 Click Advanced, then click Next. The Welcome screen
opens.
3 Click Displays Manager. The Displays Manager screen
opens.
4 Right-click the picture of the notebook in the Desktop
and Display Setup area, then click Disable.
5 When the Displays Manager Notification dialog box
opens, click Yes.
6 Right-click the picture of the monitor in the Attached
displays currently disabled area, then click Extend
main onto monitor.
7 When the Displays Manager Notification dialog box
opens, click Yes.
Tip
You can also right-click on the desktop, then click Catalyst
Control Center to open the Catalyst Control Center.