Owner's Manual

53
www.gateway.com
Closing the case
4 Replace the metal reinforcing beam/hard drive assembly by fitting it to the side of
the chassis.
Replacing the side panel
To replace the side panel:
1 Make sure that all of the internal cables are arranged inside the case so they will not
be pinched when you close the case.
2 Engage the panel tabs into the bottom of the case, then swing the side panel up toward
the top of the computer until it clicks to secure it into place.
3 Reconnect the cables and power cord.
Caution
Be careful not to pinch or damage the hard drive power and data
cables when you replace the metal reinforcing beam/hard drive
assembly.
8510946.book Page 53 Friday, August 12, 2005 10:36 AM