Quick Start Manual

2 Plug in the monitor
To protect your monitor from power fluctuations, use
a surge protector (not included).
2 Plug in the monitor
To protect your monitor from power fluctuations, use
a surge protector (not included).
1 Connect your monitor to your computer
Follow the instructions that came with your computer.
1 Connect your monitor to your computer
Follow the instructions that came with your computer.
3 Turn on the monitor 3 Turn on the monitor
4 Audio connection 4 Audio connection
change without notice. Actual product may vary from image shown.
Getting Help
See your documentation
Refer to the documentation that came with your monitor or go to www.gateway.com to get the online
documentation.
Check Gateway Support
For frequently-asked questions, setup help, and immediate information on common technical issues, go to
www.support.gateway.com
Contact Tech Support
To speak with a technical support representative, call toll-free 866-539-3901 (U.S.) or 800-297-5980
(Canada)
Digital DVI
DVI
Analog VGA (option)
D-Sub
Press the power button at the bottom of the monitor.
The power
LED on the power button changes from
clear (off) to blue (on).
(option)
MUC 0 0 0 0
H
© Gateway, Inc. All rights reserved. Gateway is a trademark or registered trademark of Gateway, Inc. in the U.S. and other countries. Product specifications subject to
( )option
2010
2
2
Follow the instructions that came with your computer.Follow the instructions that came with your computer.
HX2001L
P/N:MU.C2H00.001