DVD Player User Manual
Table Of Contents
- Contents
- Checking Out Your Gateway Receiver
- Connecting Components and Speakers
- Understanding video connections
- Understanding audio connections
- Connecting the AM loop antenna
- Connecting the FM antenna
- Connecting a DVD player
- Connecting a 6 or 7 channel component
- Connecting a VCR
- Connecting a tape component
- Connecting an AUX component
- Connecting a television
- Connecting speakers
- Plugging in your components
- Using the Receiver
- Using the OSD
- Maintaining and Troubleshooting Your Receiver
- Specifications and Setup Codes
- Safety, Regulatory, and Legal Information
- Index
71
Troubleshooting
support..gateway.com
■ Check component connections.
■ Check the selected input source.
No sound from the surround speakers
■ Select a surround mode.
■ Adjust master volume and surround level.
■ Select the desired surround speaker setting.
■ Select a stereo or surround source.
No sound from the center speaker
■ Select the desired surround speaker setting.
■ Adjust master volume and center level.
■ Make sure center speaker setting is not set to N.
No sound from the surround back speaker
■ Under the proper situations, perform the 6.1 surround playback.
■ Adjust master volume and surround back level.
■ Select the desired surround back speaker setting.
Stations cannot be received
■ Connect an antenna.
■ Move the antenna and retry tuning.
■ Tune in the desired station frequency.
Preset stations cannot be received
■ Memorize the correct station frequency.
■ Memorize the stations again.
Poor FM reception
■ Connect an antenna.
■ Change the position of the antenna.