DVD Player User Manual
Table Of Contents
- Contents
- Checking Out Your Gateway Receiver
- Connecting Components and Speakers
- Understanding video connections
- Understanding audio connections
- Connecting the AM loop antenna
- Connecting the FM antenna
- Connecting a DVD player
- Connecting a 6 or 7 channel component
- Connecting a VCR
- Connecting a tape component
- Connecting an AUX component
- Connecting a television
- Connecting speakers
- Plugging in your components
- Using the Receiver
- Using the OSD
- Maintaining and Troubleshooting Your Receiver
- Specifications and Setup Codes
- Safety, Regulatory, and Legal Information
- Index
77
Specifications
www.gateway.com
Note: Design and specifications are subject to change without notice for
improvements.
Signal to noise ratio, 1 mV, mono/stereo | 72/65 dB
Total harmonic distortion, 1 kHz, mono/stereo | 0.2/0.4%
Frequency response, 20 Hz~15 kHz | ±1 dB
Stereo separation, 65 dBf, 1 kHz | 45 dB
Capture ratio | 4 dB
IF rejection ratio | 120 dB
AM Tuner
Tuning frequency range | 520~1710 kHz
Usable sensitivity | 500
µV/m
Signal to noise ratio | 40 dB
Selectivity | 25 dB
General
Power supply | 120 V~60 Hz
Power consumption | 110 W
Dimensions (W×H×D) | 17 1/8 × 2 7/8 × 10 inches (435 × 73.5 × 254 mm)
Weight (Net) | 4.2 kg (9.3 Ibs)