User manual

CHAPTER 1: System specifications
8
Memory
Supported protocols
n
ACPI 1.0b/2.0/3.0 compliance
n
PCI 2.2
n
System/HDD password
n
Security Control
n
INT 13H Extenstions
n
PnP BIOS 1.0a SMBIOS 2.4
n
BIOS Boot Specification
n
Simple Boot Flag 1.0
n
Boot block
n
PCI Bus Power Management Interface Specification
n
USB Specification 1.1/2.0
n
IEEE 1394 1.0
n
USB/1394 CD-ROM Boot Up support
n
PC Card Standard 1995 (PCMCIA 3.0 Compliant Device)
n
IrDA 1.0
n
Intel AC97 CNR Specification
n
WfM 2.0
n
PXE 2.1
n
Boot Integrity Service Application Program Interface (BIS) 1.0
n
PC99a and Mobile PC2001 Compliant
BIOS password control Manually set
Item Specification
Memory controller Built-in
Memory size 0 MB (no on-board memory)
SO-DIMM socket number 2 sockets
Supports maximum
memory size
4GB
Supports SO-DIMM type DDR3
Supports data rate 800/1066/1333 MT/s
Supports SO-DIMM
package
204-pin SO-DIMM
Memory module
combinations
You can install memory modules in any combination as long as they match the above
specifications.
Item Specification