User Guide

11
www.gateway.com
6 Lift the end of the hard drive kit furthest from the connector, then remove the hard
drive kit from the bay.
7 If the new hard drive already includes the hard drive kit bracket, go to Step 8.
- OR -
If you need to move the hard drive kit bracket from the old hard drive kit to the new
hard drive, follow the instructions in “Replacing the hard drive in the hard drive kit”
on page 12.
8 Place the new hard drive kit into the bay and slide it into the connector.
9 Replace the cover and tighten the captive hard drive screw.
10 Replace the battery, connect the AC adapter and modem and network cables, then
turn on the notebook.