Gateway Notebook User Guide
Contents 1 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Gateway Web site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using eSupport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Help and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Searching for a topic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the EZ Point pointing device cap . . . . . . . . . . . . . . . . . . . .39 Turning the touchpad or pointing device on or off . . . . . . . . . . . . . . . .40 Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Turning your wireless radio on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 4 Using Drives and Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Changing modules . . . . . . . . . . . .
Attaching to the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Disconnecting from the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . 86 Securing your port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 8 Maintaining Your Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Caring for your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning your notebook . . .
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Telephone support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Before calling Gateway Customer Care . . . . . . . . . . . . . . . . . . . . . . .121 Telephone numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 Self-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Getting Help • Using the Gateway Web site • Using Help and Support • Using Your Computer guide • Using online help 1
Chapter 1: Getting Help Thank you for purchasing our notebook! You have made an excellent decision choosing Gateway. We are sure that you will be pleased with the outstanding quality, reliability, and performance of your new notebook. Each and every Gateway notebook uses the latest technology and passes through the most stringent quality control tests to ensure that you are provided with the best product possible.
Gateway Web site Gateway Web site Gateway's online support is available 24 hours per day, 7 days per week and provides the most current drivers, product specifications, tutorials, and personalized information about your notebook. Visit the Gateway eSupport Web site at support.gateway.com. www.gateway.
Chapter 1: Getting Help Using eSupport The eSupport site is divided into five major areas: ■ Support Home ■ Product Support ■ Downloads ■ Contact Us ■ PC Tools Support Home Click Support Home, then click All Support Documents to access product documentation, specifications, and guides. You can also browse through the reference area to locate an article specific to the question you have.
Help and Support Help and Support Your notebook includes Help and Support, an easily accessible collection of help information, troubleshooters, and automated support. Use Help and Support to answer questions about Windows and to help you quickly discover and use the many features of your Gateway notebook. To start Help and Support: ■ Click Start, then click Help and Support. Help and Support opens. You can find help information by clicking a link, performing a search, or browsing the index. www.
Chapter 1: Getting Help Searching for a topic To search for a topic in Help and Support, type a word or phrase (keyword) in the Search box located at the top of any Help and Support screen, then click the arrow button. For each search, you receive the following search result types: ■ Suggested Topics - These topics are located in Help and Support and are relevant to your search topic.
Online help Online help Many programs provide information online so you can research a topic or learn how to perform a task while you are using the program. You can access most online help information by selecting a topic from a Help menu or by clicking a Help button. You can search for information by viewing the help contents, checking the index, searching for a topic or keyword, or browsing through the online help. www.gateway.
Chapter 1: Getting Help 8 www.gateway.
Chapter 2 Checking Out Your Gateway Notebook • Identifying features • Locating your notebook’s model and serial number • Locating the Microsoft Certificate of Authenticity • Locating the specifications for your notebook • Purchasing accessories 9
Chapter 2: Checking Out Your Gateway Notebook Front Speaker Component Headphone jack LCD panel Battery charge release Microphone jack indicator Power indicator latch Icon Speaker Description Speakers Provide audio output when headphones or amplified speakers are not plugged in. LCD panel release latch Open the LCD panel by sliding the release latch. Battery charge indicator ■ ■ ■ ■ Power indicator ■ ■ ■ LED LED LED LED blue - battery is fully charged. purple - battery is charging.
Left side Left side Kensington lock slot Ventilation fan S-Video out jack Component Icon Modular bay Description Kensington™ lock slot Secure your notebook to an object by connecting a Kensington cable lock to this slot. S-Video out jack Plug a standard S-Video cable into this jack. For more information, see “Viewing the display on a television” on page 57. Ventilation fan Helps cool internal components. Warning: Do not work for long periods with the notebook resting on your lap.
Chapter 2: Checking Out Your Gateway Notebook Right side Memory USB ports card reader Ethernet jack USB ports IEEE 1394 port Modem jack PC Card slot Component Icon Description PC Card slot Insert one Type II PC Card into this slot. For more information, see “Adding and removing a PC Card” on page 52. IEEE 1394 port Plug an IEEE 1394 (also known as Firewire® or i.Link®) device (such as a digital camcorder) into this 4-pin IEEE 1394 port.
Back Component Icon Description Ethernet jack Plug a 10/100/1000 Ethernet network cable into this jack. The other end of the cable can be plugged into a cable modem, DSL modem, or an Ethernet network jack. For more information, see “Connecting to a cable or DSL modem or to an Ethernet network” on page 26. Modem jack Plug a modem cable into this jack. For more information, see “Connecting the dial-up modem” on page 25.
Chapter 2: Checking Out Your Gateway Notebook Bottom Docking port Battery Battery lock Battery latch Memory bay Website: Online Support: Tech Support Phone: Hours: Model: S/No: Hard drive bay System label Modular bay latch Component Description Battery Provides power when the notebook is not plugged into AC power. Docking port Connect the port replicator to this port. Warning: Power is passed through this port.
Keyboard area Component Description Memory bay Install a memory module into this bay. For more information, see “Adding or replacing memory” on page 73. Battery lock Slide to unlock the battery. For more information, see “Changing batteries” on page 65. Keyboard area Power button Keyboard Optional EZ Point pointing device Microphone Optional EZ Point pointing device buttons Status indicators Component Icon Touchpad Description Power button Press to turn the power on or off.
Chapter 2: Checking Out Your Gateway Notebook Component Icon Description Microphone Record audio through this microphone. The built-in microphone is turned off while an external microphone is connected. For the location of your microphone jack, see “Front” on page 10 and “Back” on page 100. EZ PointTM pointing device buttons (optional) Provides all the functionality of mouse buttons. For more information, see “Using the optional EZ Point pointing device” on page 38.
Identifying your model Identifying your model Important The labels shown in this section are for informational purposes only. Label information varies by model, features ordered, and location. Gateway model and serial number The label on the bottom of your notebook contains information that identifies your notebook model and its features. Gateway Customer Care will need this information if you call for assistance. Website: Online Support: Tech Support Phone: Hours: Model: S/No: www.gateway.com www.
Chapter 2: Checking Out Your Gateway Notebook Finding your specifications For more information about your notebook, such as memory size, memory type, and hard drive size, visit Gateway’s eSupport page at support.gateway.com. The eSupport page also has links to additional Gateway documentation and detailed specifications. For more information, see “Gateway Web site” on page 3. Accessories To order accessories, visit the Accessory Store at accessories.gateway.com.
Accessories Printers You can attach almost any type of printer to your notebook. The most common types are inkjet and laser printers, which print in color or black and white. Inkjet printers and cartridges are relatively inexpensive, but they are slower than laser printers. Using an inkjet color printer, you can print pictures, banners, and greeting cards, as well as documents. Laser printers and cartridges are more expensive, but they print much faster than inkjet printers.
Chapter 2: Checking Out Your Gateway Notebook 20 www.gateway.
Chapter 3 Getting Started • Installing the battery • Connecting the AC adapter • Connecting the dial-up modem • Connecting to a cable or DSL modem or to an Ethernet network • Turning your notebook on and off • Using the status indicators • Using the keyboard, the EZ Pad touchpad, and the optional EZ Point pointing device • Adjusting the volume • Connecting to a wireless network 21
Chapter 3: Getting Started Installing the battery To install the battery: 1 2 3 Close the LCD panel. 4 Slide the battery lock to the locked position. Turn your notebook over so the bottom is facing up. Hold the battery label-side down and slide it into the open battery slot until the battery clicks into place. Connecting the AC adapter You can run your notebook using an AC adapter or your notebook’s battery. The battery was shipped to you partially charged.
Connecting the AC adapter To connect the AC adapter: 1 Connect the power cord to the AC adapter. Caution Make sure that you use the AC adapter that came with your notebook or one of the same type purchased from Gateway. Replace the power cord if it becomes damaged. The replacement cord must be of the same type and voltage rating as the original cord or your notebook may be damaged. 2 Connect the AC adapter to your notebook’s power connector. www.gateway.
Chapter 3: Getting Started 3 Plug the power cord into a wall outlet. The power indicator turns on (see “Front” on page 10 for the location of the power indicator). If the power indicator does not turn on, unplug the adapter from your notebook, then plug it back in. 4 When you finish using your notebook for the first time, turn off your notebook and leave your notebook connected to AC power until the battery charge indicator turns blue. Warning Important Do not attempt to disassemble the AC adapter.
Connecting the dial-up modem Connecting the dial-up modem Your notebook has a built-in 56K modem that you can use to connect to a standard telephone line. Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. To connect the modem: 1 Insert one end of the modem cable into the modem jack right side of your notebook. 2 Insert the other end of the modem cable into a telephone wall jack. The modem will not work with digital or PBX telephone lines.
Chapter 3: Getting Started Connecting to a cable or DSL modem or to an Ethernet network Your notebook has a network jack that you can use to connect to a cable or DSL modem or to an Ethernet network. To connect to a cable or DSL modem or to an Ethernet network: 26 1 Insert one end of the network cable into the network jack the right side of your notebook. 2 Insert the other end of the network cable into a cable modem, DSL modem, or an Ethernet network jack. 3 Start your notebook. www.gateway.
Starting your notebook Starting your notebook To start your notebook: 1 Slide the latch on the front of your notebook, then lift the LCD panel. 2 Press the power button located above the keyboard. The power button is preset to On/Off mode. However, you can also set it to function in Standby/Resume mode. Tips & Tricks 3 For more information about changing the power button mode, see “Changing Power-Saving Settings” in Using Your Computer which has been included on your hard drive.
Chapter 3: Getting Started Warning Do not work for long periods with the notebook resting on your lap. If the air vents are blocked, the notebook may become hot enough to harm your skin. Caution Provide adequate space around your notebook so air vents are not obstructed. Do not use the notebook on a bed, sofa, rug, or other similar surface.
Restarting (rebooting) your notebook Restarting (rebooting) your notebook If your notebook does not respond to keyboard or touchpad input, you may have to close programs that are not responding. If closing unresponsive programs does not restore your notebook to normal operation, you may have to restart (reboot) your notebook. To close unresponsive programs and restart your notebook: 1 2 3 4 5 6 Press CTRL+ALT+DEL. The Windows Security dialog box opens. Click Task Manager.
Chapter 3: Getting Started Status indicators Status indicators inform you when a drive is being used or when a button has been pressed that affects how the keyboard is used. Wireless network Num lock Caps lock Indicator Icon Wireless network (optional) Description ■ ■ Caps lock ■ A Num lock Module ■ ■ 1 ■ ■ ■ ■ Hard drive ■ ■ 30 Hard drive Module LED on - Wireless radio is turned on. LED off - Wireless radio is turned off. LED on - Caps lock is turned on.
Using the keyboard Using the keyboard Your notebook features a full-size keyboard that functions the same as a desktop computer keyboard. Many of the keys have been assigned alternate functions, including shortcut keys for Windows, function keys for specific system operations, and the Num Lock keys for the numeric keypad. You can attach an external keyboard to the notebook or port replicator using a USB port. You do not need to shut down the notebook to connect a USB keyboard.
Chapter 3: Getting Started Key types The keyboard has several different types of keys. Some keys perform specific actions when pressed alone and other actions when pressed in combination with another key. Key type Function keys Icon Description Press these keys labeled F1 to F12 to perform actions in programs. For example, pressing F1 may open help. Each program uses different function keys for different purposes. See the program documentation to find out more about the function key actions.
Using the keyboard System key combinations When you press the FN key and a system key at the same time, your notebook performs the action identified by the text or icon on the key. Press and hold FN, then press this system key... To... Turn the optional wireless network on or off. For more information, see the printed network guide that came with your notebook. Warning: Radio frequency wireless communication can interfere with equipment on commercial aircraft.
Chapter 3: Getting Started Press and hold FN, then press this system key... To... Skip back one CD song or DVD track. Skip ahead one CD song or DVD track. Turn on Num Lock so you can use the numeric keypad. Press this key combination again to turn off Num Lock. The Num Lock status indicator appears when this function is turned on. Increase the brightness of the display. Decrease the brightness of the display. Mute the sound. Press the key combination again to restore the sound.
Using the EZ Pad touchpad Using the EZ Pad touchpad The EZ Pad™ consists of a touchpad, two buttons, and a scroll zone. Touchpad Scroll zone Left button Right button When you move your finger on the touchpad, the pointer (arrow) on the screen moves in the same direction. You can use the EZ-Pad left and right buttons below the touchpad to select objects. www.gateway.
Chapter 3: Getting Started Tips & Tricks For instructions on how to adjust the double-click speed, pointer speed, right-hand or left-hand configuration, and other touchpad settings, see “Changing the mouse or touchpad settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. Using the touchpad To... Do this... Move the pointer on the screen. Move your finger around on the touchpad.
Using the EZ Pad touchpad To... Do this... Access a shortcut menu or find more information about an object on the screen. Position the pointer over the object. Quickly press and release the right button once. This action is called right-clicking. Move an object on the screen. Position the pointer over the object. Press the left button and hold it down, then use the touchpad to move (drag) the object to the appropriate part of the screen. Release the button to drop the object where you want it.
Chapter 3: Getting Started Using the optional EZ Point pointing device The EZ Point™ consists of a pointing device and two buttons. Important Your notebook was sent from Gateway with the pointing device turned on. For instructions on how to turn the pointing device on or off, see “Turning the touchpad or pointing device on or off” on page 40.
Using the optional EZ Point pointing device Button Function Right Access a shortcut menu or find more information about an object on the screen. Tips & Tricks For instructions on how to adjust the double-click speed, pointer speed, right-hand or left-hand configuration, and other pointing device settings, see “Changing the mouse or touchpad settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation.
Chapter 3: Getting Started Turning the touchpad or pointing device on or off You can turn on or turn off the touchpad and optional pointing device, depending on which device you prefer to use. To turn the touchpad or optional pointing device on or off: 40 1 Click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Printers and Other Hardware. 2 Click/Double-click the Mouse icon. The Mouse Properties dialog box opens. www.gateway.
Using the optional EZ Point pointing device 3 Click the Device Settings tab. 4 Select the device you want to turn on or turn off, then click Enable or Disable. www.gateway.
Chapter 3: Getting Started Adjusting the volume You can use the volume control to adjust the overall volume of your notebook. To adjust the overall volume level using hardware controls: ■ If you are using external speakers, turn the knob on the front of the speakers. -ORUse the mute and volume control buttons on the keyboard. For more information, see “System key combinations” on page 33.
Turning your wireless radio on or off Turning your wireless radio on or off Warning Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. IEEE 802.11a, IEEE 802.11b, and IEEE 802.11g communication devices are examples of devices that provide wireless communication.
Chapter 3: Getting Started 44 www.gateway.
Chapter 4 Using Drives and Ports • Changing modules • Using CD and DVD drives • Using the media card reader • Using a PC Card • Viewing the display on a monitor or projector • Viewing the display on a television 45
Chapter 4: Using Drives and Ports Changing modules Your notebook’s modular bay supports different bay modules, such as a CD drive, combination DVD/CD-RW drive, recordable DVD drive, a second hard drive, a diskette drive, or a secondary battery. Modular bay Modular bay latch Security screw (optional) To change bay modules: 1 If you are removing a disc or diskette drive, make sure that the module is empty. 2 Click the remove hardware icon in the taskbar, the drive you are removing, then click Stop.
Changing modules 3 4 Close the LCD panel. 5 6 7 Turn your notebook over so the bottom is facing up. 8 9 Slide the bay module out. 10 11 12 13 Disconnect your notebook from the optional port replicator (see “Disconnecting from the port replicator” on page 86). Remove the security screw if your notebook has one. Slide the bay module release latch. The module moves out slightly. Firmly push the new bay module straight into the bay until the latches click into place.
Chapter 4: Using Drives and Ports 14 If your notebook is on, click OK to continue working on your notebook. - OR If your notebook is off, turn it on. Using the CD or DVD drive You can use your notebook to enjoy a wide variety of multimedia features. Identifying drive types Your Gateway notebook may contain one of the following drive types. Look on the front of the drive for one or more of the following logos: If your drive has this logo... 48 This is your drive type... Use your drive for...
Using the CD or DVD drive Inserting a CD or DVD Eject button Manual eject hole Important Some music CDs have copy protection software. You may not be able to play these CDs on your notebook. To insert a CD or DVD: 1 Press the eject button on the CD or DVD drive. After the tray opens slightly, pull the disc tray completely open. 2 Place the disc in the tray with the label facing up, then press down carefully on the disc until it snaps into place.
Chapter 4: Using Drives and Ports Playing a CD Use a music program or Windows Media Player on your computer to: ■ Play music CDs ■ Create MP3 music files from your music CDs ■ Edit music track information ■ Use your music files to build a music library Tips & Tricks For more information about playing CDs, see “Playing CDs” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation.
Using the memory card reader Using the memory card reader You can use memory cards to transfer pictures from a digital camera to your notebook. You can also use the memory card reader to transfer data between your notebook and a device that uses memory cards, such as a PDA, MP3 player, or cellular telephone. Memory card types The memory card reader supports Memory Stick®, Memory Stick Pro®, MultiMediaCard™, and Secure Digital™.
Chapter 4: Using Drives and Ports To remove a memory card: 1 Push the memory card into the notebook. The memory card pops out slightly. 2 Pull the memory card out of the notebook. Important 3 Do not use the remove hardware icon in the taskbar to remove the memory card. If you use the remove hardware icon, your notebook may not recognize your memory card reader until you restart your notebook. Insert the protector into the memory card slot.
Adding and removing a PC Card To insert a PC Card: ■ Push the card firmly into the PC Card slot label-side up until the outer edge of the card is flush with the side of your notebook. To remove a PC Card: 1 Click the remove hardware name, then click Stop. icon in the taskbar, the PC Card -ORTurn off your notebook. Important 2 If the remove hardware icon does not appear on the taskbar, click the show hidden icons button. Release the eject button by pressing the PC Card eject button once. www.
Chapter 4: Using Drives and Ports 3 54 Eject the PC Card by pressing the eject button again. www.gateway.
Viewing the display on a projector or monitor Viewing the display on a projector or monitor You can use your notebook for giving presentations by connecting an external monitor or projector to your monitor (VGA) port. Your notebook supports simultaneous LCD and CRT display. Simultaneous display lets you control the presentation from your notebook and at the same time face your audience. To use a projector or external monitor: 1 2 Turn off your notebook. 3 4 Turn on your notebook.
Chapter 4: Using Drives and Ports 6 Click the Settings tab. 7 8 9 Right-click the second monitor icon (labeled 2), then click Attached. 10 56 Click Apply. Adjust properties such as Screen Resolution or Color Quality if necessary. Click OK. Important Press FN+F4 to switch between viewing the display on the LCD panel and viewing the display on the projector or monitor.
Viewing the display on a television Viewing the display on a television The S-Video out jack on your notebook or port replicator lets you view your notebook display on a television screen using a standard S-Video cable. Important To turn on external video by default, connect the television (or other external video device) before starting your notebook. Important Audio is not transmitted through the S-Video out jack.
Chapter 4: Using Drives and Ports 58 7 Click the Settings tab. 8 Click Advanced. The Multiple Monitors and ATI Mobility Radeon X600 Properties dialog box opens. www.gateway.
Viewing the display on a television 9 Click the Displays tab. Enable TV TV 10 Click the Enable TV button if it is not already enabled, then click Apply. Important If the Enable TV and TV buttons are grayed out, your notebook has not detected the television. Make sure that the television is turned on and connected correctly. www.gateway.
Chapter 4: Using Drives and Ports 11 Click TV to make any adjustments to the TV settings. Important 12 13 60 If you are traveling internationally, you may need to change the video standard. For example, many televisions in Asia use PAL instead of NTSC. Click Apply. Click OK to close the Multiple Monitors and ATI Mobility Radeon X600 Properties dialog box. www.gateway.
Chapter 5 Managing Power • Checking and recharging the battery • Recalibrating the battery • Changing batteries • Extending the life of the battery 61
Chapter 5: Managing Power Monitoring the battery charge Your new Gateway notebook is designed to provide an exceptional balance of performance and portability. Your notebook uses the latest chipset and mobile processor technologies to manage the processor speed and power consumption for a greater battery life experience. This design provides you with maximum performance when plugged into AC power balanced with optimized battery life when on battery power. Closely monitor the battery charge.
Recharging the battery Recharging the battery The main and optional secondary batteries recharge while they are installed and your notebook is connected to AC power. While the batteries are recharging, the battery charge indicator turns purple and the power cord icon in the taskbar has a lightning bolt . Important If the power cord or battery icon does not appear on the taskbar, click the show hidden icons button.
Chapter 5: Managing Power 4 Completely discharge the batteries by doing the following: a From the desktop, right-click the power icon, then select Adjust Power Properties. b c Click the Power Schemes tab. d e Click the Alarms tab. Click the arrow button to open the Power Schemes list, then click Always On. Click to deselect the Low battery alarm and Critical battery alarm check boxes. Let the batteries drain until your notebook automatically turns off.
Changing batteries Changing batteries If your notebook is connected to AC power or if it has a charged secondary battery installed, you can change the main battery while the notebook is turned on. If your notebook has only one battery and it is not plugged into an AC outlet, you must turn the notebook off while changing the battery. Warning Danger of explosion if battery is incorrectly replaced. Replace only with a battery specifically manufactured for your Gateway notebook.
Chapter 5: Managing Power 5 Slide the battery lock to the unlocked position. 6 Slide the battery release latch, then slide the battery out of the notebook. 7 8 9 10 11 66 Slide a recharged battery into the notebook until it snaps into place. Slide the battery lock to the locked position. Turn your notebook over. Reattach the optional port replicator. Open the LCD panel and press the power button. www.gateway.
Extending battery life Installing a secondary battery Your notebook’s modular bay accepts a secondary battery. The secondary battery charges when the notebook is connected to AC power. Warning Danger of explosion if battery is incorrectly replaced. Replace only with a battery specifically manufactured for your Gateway notebook. Discard used batteries according to the manufacturer’s instructions. The battery used in this device may present a fire or chemical burn hazard if mishandled.
Chapter 5: Managing Power ■ Modify the power management settings for maximum power savings. Tips & Tricks For more information about using power management settings, see “Changing Power-Saving Settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. ■ Close the LCD panel to turn off the display while you are not using your notebook. The display stays off until you open the panel again.
Extending battery life Changing power modes You can use the following power modes to lengthen the life of your notebook’s battery: ■ Standby - while your notebook is in Standby, it switches to a low power state where devices, such as the display and drives, turn off. ■ Hibernate - (also called save to disk) writes all current memory (RAM) information to the hard drive, then turns your notebook completely off.
Chapter 5: Managing Power 70 www.gateway.
Chapter 6 Upgrading Your Notebook • Adding and replacing memory • Replacing the hard drive 71
Chapter 6: Upgrading Your Notebook Preventing static electricity discharge Important Before installing memory or replacing the hard drive, you should read and understand the information in this section. The components inside your notebook are extremely sensitive to static electricity, also known as electrostatic discharge (ESD).
Adding or replacing memory Adding or replacing memory Your notebook uses memory modules called SO-DIMMs (Small Outline Dual Inline Memory Modules). The modules are available in various capacities and any module can be placed in the slot. Use only memory modules designed for your Gateway notebook for upgrading your memory. Memory bay To add or replace memory modules: 1 Follow the guidelines under “Preventing static electricity discharge” on page 72. 2 3 4 5 Turn off your notebook.
Chapter 6: Upgrading Your Notebook 74 7 Remove the main and secondary batteries. For more information, see “Changing batteries” on page 65. 8 9 Loosen the five memory bay cover screws. Remove the memory bay cover. www.gateway.
Adding or replacing memory 10 If you are removing a module, gently press outward on the clip at each end of the memory module until the module tilts upward. 11 Pull the memory module out of the slot. www.gateway.
Chapter 6: Upgrading Your Notebook 12 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. Important 13 14 15 16 17 76 Use only memory modules designed for your Gateway notebook. Gently push the module down until it clicks in place.
Replacing the hard drive kit Replacing the hard drive kit If you would like more hard drive capacity, you can replace your original drive with a higher-capacity drive. Hard drive To replace the hard drive kit: 1 Back up any data you want to transfer to the new hard drive. For more information, see “Backing up files” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation.
Chapter 6: Upgrading Your Notebook 8 Remove the main and secondary batteries. For more information, see “Changing batteries” on page 65. 9 Remove the hard drive bay cover screws, slide the hard drive bay cover, then remove it. The hard drive is attached to the back of the cover. 10 If your new hard drive already includes the hard drive cover, go to Step 15. -ORIf you need to move the hard drive cover from your old hard drive to your new hard drive, go to Step 11. 78 www.gateway.
Replacing the hard drive kit 11 Remove the screws that secure the hard drive to the hard drive cover. Screws Screws 12 Remove the cover from the old drive. 13 14 15 Insert the new drive onto the cover so the screw holes line up. 16 17 Insert the batteries, then turn your notebook over. Replace the screws that secure the cover to the drive. Slide the new hard drive kit into your notebook, then replace the cover screws. Reconnect the optional port replicator. www.gateway.
Chapter 6: Upgrading Your Notebook 80 18 Connect the power adapter, modem cable, and network cable, then turn on your notebook. 19 For instructions on installing Windows, your drivers, and your applications, see the instructions in the restore booklet that came with your notebook. www.gateway.
Chapter 7 Using the Optional Port Replicator ■ Identifying features ■ Connecting and disconnecting the port replicator ■ Securing the port replicator with a locking cable 81
Chapter 7: Using the Optional Port Replicator Front Docking release latch Power button Kensington lock ring Docking port Component Icon Description Power button Press to turn the power on or off. Docking release latch Press the release latch to release the notebook. Kensington™ lock ring Secure your port replicator and notebook to an object by running a Kensington cable through this ring and locking it to the slot on the notebook. Docking port Connect the notebook to this port.
Back Back Headphone jack S-Video out jack IEEE 1394 port USB ports Modem jack Parallel Monitor port port Ethernet jack Component Icon Serial Microphone Power port USB ports jack connector Description S-Video out jack Plug a standard S-Video device into this jack. For more information, see “Viewing the display on a television” on page 57. IEEE 1394 port Plug an IEEE 1394 (also known as Firewire® or i.Link®) device (such as a digital camcorder) into this 4-pin IEEE 1394 port.
Chapter 7: Using the Optional Port Replicator Component Icon Description Monitor port Plug an analog VGA monitor or projector into this port. Parallel port Plug a parallel device (such as a printer) into this port. Serial port Plug a serial device (such as a digital camera) into this port. Microphone jack Plug a microphone into this jack. The built-in microphone is turned off when a microphone is plugged into this jack. For the location of your built-in microphone, see “Keyboard area” on page 15.
Connecting to the port replicator 3 Press down on the notebook until it snaps into place. Caution Press down on the outside edges of the notebook. Do not press in the middle or you may damage the LCD screen. Important The notebook may detect additional devices and add drivers after being attached to the port replicator. This process must be completed for components to work correctly. Follow any on-screen instructions, if necessary. www.gateway.
Chapter 7: Using the Optional Port Replicator Disconnecting from the port replicator You can separate your notebook from the port replicator while your notebook is off or on (not in Standby or Hibernate mode). To separate your notebook from the port replicator: 1 If your notebook is off, go to Step 2. -ORIf your notebook is on, click Start, then click Undock Computer. The Undock Computer menu item appears in the Start menu only while the notebook is docked.
Securing your port replicator Securing your port replicator You can secure your notebook and port replicator to an object by using the security ring located on the left side of the port replicator and the Kensington lock slot located on the left side of your notebook. To secure your notebook and port replicator: 1 2 3 Open the security ring on the port replicator. Attach your notebook to the port replicator.
Chapter 7: Using the Optional Port Replicator 88 www.gateway.
Chapter 8 Maintaining Your Notebook • Caring for your notebook • Cleaning your notebook • Protecting your notebook from viruses • Updating Windows • Restoring your system 89
Chapter 8: Maintaining Your Notebook Caring for your notebook To extend the life of your notebook: 90 ■ Be careful not to bump or drop your notebook, and do not put any objects on top of it. The case, although strong, is not made to support extra weight. ■ When transporting your notebook, we recommend that you put it in a carrying case. ■ Keep your notebook away from magnetic fields. Magnetic fields can erase data on hard drives.
Cleaning your notebook Cleaning your notebook Keeping your notebook clean and the vents free from dust helps keep your notebook performing at its best.
Chapter 8: Maintaining Your Notebook Cleaning the keyboard You should clean the keyboard occasionally by using an aerosol can of air with a narrow, straw-like extension to remove dust and lint trapped under the keys. If you spill liquid on the keyboard, turn off your notebook and turn the notebook upside down. Let the liquid drain, then let the keyboard dry before trying to use it again. If the keyboard does not work after it dries, you may need to replace it.
Protecting your computer from viruses Protecting your computer from viruses A virus is a program that attaches itself to a file on a computer, then spreads from one computer to another. Viruses can damage data or cause your computer to malfunction. Some viruses go undetected for a period of time because they are activated on a certain date. Protect your computer from a virus by: ■ Registering your copy of Norton AntiVirus and subscribing to the virus definition update service.
Chapter 8: Maintaining Your Notebook To scan for viruses: 94 1 Click Start, All Programs, Norton AntiVirus, then click Norton AntiVirus 2005. Norton AntiVirus opens. 2 Click Scan for Viruses. 3 Click the type of scan you want to make in the Scan for Viruses area. www.gateway.
Protecting your computer from viruses To remove a virus: 1 If Norton AntiVirus finds a virus, follow all on-screen instructions to remove the virus. 2 3 Turn off your computer and leave it off for at least 30 seconds. Turn on your computer and rescan for the virus. To update Norton AntiVirus: Important 1 2 You received a free limited time subscription to the Norton AntiVirus service when you purchased your notebook.
Chapter 8: Maintaining Your Notebook Updating Windows Windows Update is the online extension of Windows that helps you to keep your computer up-to-date. Use Windows Update to choose updates for your computer’s operating system, software, and hardware. New content is added to the site regularly, so you can always get the most recent updates and fixes to protect your computer and keep it running smoothly.
Chapter 9 Troubleshooting • Troubleshooting typical hardware and software problems • Getting telephone support • Using automated troubleshooting systems 97
Chapter 9: Troubleshooting Safety guidelines While troubleshooting your notebook, follow these safety guidelines: ■ Never remove the memory bay or hard drive bay cover while your notebook is turned on, while the battery is installed, and while the modem cable, network cable, and AC power adapter are connected to your notebook. ■ Make sure that you are correctly grounded before accessing internal components.
First steps First steps If you have problems with your notebook, try these things first: ■ Make sure that the AC power adapter is connected to your notebook and an AC outlet and that the AC outlet is supplying power. ■ If you use a power strip or surge protector, make sure that it is turned on. ■ If a peripheral device (such as a keyboard or mouse) does not work, make sure that all connections are secure. ■ Make sure that your hard drive is not full.
Chapter 9: Troubleshooting Troubleshooting Troubleshooting topics are listed in alphabetical order. Audio Audio troubleshooting is covered under “Sound” on page 118. Battery Battery troubleshooting is covered under “Power” on page 116. CD drives CD drive troubleshooting is covered under “DVD drives” on page 103. Device installation You have computer problems after adding a new device Sometimes a new device, such as a PC Card, can cause a system resource (IRQ) conflict.
Troubleshooting Help and Support For more information about IRQs, click Start, then click Help and Support. Type the keyword IRQs in the Search box , then click the arrow. To free IRQ resources for the new device: 1 In the Device Manager window, check the device list for a resource conflict. A resource conflict appears as a black exclamation point in a yellow circle. 2 Remove the device you are trying to install, then determine which one of the existing devices or ports you can disable.
Chapter 9: Troubleshooting You see a “Disk is full” error message ■ Delete unnecessary files on the diskette. ■ Try a different diskette. Occasionally diskettes are flawed and cannot be read by the diskette drive. ■ Run Error checking on the diskette. If errors are detected and corrected, try using the diskette again. Tips & Tricks For instructions on running Error checking, see “Checking the hard drive for errors” in Using Your Computer which has been included on your hard drive.
Troubleshooting The text on the display is dim or difficult to read ■ Adjust the brightness and contrast using the system keys. For more information, see “System key combinations” on page 33. ■ Change the display settings. Tips & Tricks ■ For instructions on changing the display settings, see “Adjusting the screen and desktop settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation.
Chapter 9: Troubleshooting ■ Make sure that the disc label is facing up, then try again. ■ If you are trying to play a DVD, make sure that you have a DVD drive. See “Identifying drive types” on page 48 for more information. ■ Try a different disc. Occasionally discs are flawed and cannot be read by the drive. ■ Some music CDs have copy protection software. You may not be able to play these CDs on your notebook. ■ Your notebook may be experiencing some temporary memory problems.
Troubleshooting ■ Reinstall the audio device drivers. For more information, see “Downloads” on page 4. A DVD movie will not play ■ Make sure that the label or side you want to play is facing up, then try again. ■ Make sure that you have a DVD drive. See “Identifying drive types” on page 48 for more information. ■ The DVD drive may not be inserted completely into the modular bay. Press the module into the bay, then try to access the disc again. ■ Shut down and restart your notebook.
Chapter 9: Troubleshooting You cannot eject a CD or DVD Your notebook must be turned on to remove CDs and DVDs. If you do not want to turn on your notebook, manually eject the disc by inserting an opened paper clip into the manual eject hole. See “Inserting a CD or DVD” on page 49 for the location of the manual eject hole. File management A file was accidentally deleted If a file was deleted at a DOS prompt or in Windows while holding down the SHIFT key, the file cannot be restored.
Troubleshooting ■ Empty the Recycle Bin by right-clicking the Recycle Bin icon, then clicking Empty Recycle Bin. Caution ■ All deleted files will be lost when you empty the Recycle Bin. Save your files to another drive. If the hard drive is full, copy any files not regularly used to backup media, then delete them from the hard drive. Help and Support For more information about file management, click Start, then click Help and Support.
Chapter 9: Troubleshooting The secondary hard drive is not recognized ■ The modular drive may not be inserted completely into the drive bay. Press the drive into the bay, then try to access the drive again. Internet You cannot connect to the Internet ■ If you are using a dial-up modem, make sure that the modem cable is plugged into the modem jack and not the Ethernet network jack. See “Right side” on page 12 to make sure that the connections have been made correctly.
Troubleshooting Connecting to a Web site takes too long Many factors can affect Internet performance: ■ The condition of the telephone lines in your residence or at your local telephone service ■ The condition of the Internet computers to which you connect and the number of users accessing those computers ■ The complexity of graphics and multimedia on Web pages ■ Having multiple Web browsers open, performing multiple downloads, and having multiple programs open on your notebook People are sending y
Chapter 9: Troubleshooting You are pressing a letter key and a number appears on the screen ■ The numeric keypad is turned on. See “System key combinations” on page 33 for instructions on turning off your numeric keypad. Memory You see a “Memory error” message ■ Make sure that the memory module is inserted correctly in the memory bay slot. For more information, see “Adding or replacing memory” on page 73. ■ Use a third-party diagnostic program to help determine if a memory module is failing.
Troubleshooting ■ Make sure that the modem cable is less than 6 feet (1.8 meters) long. ■ Remove any line splitters or surge protectors from your telephone line, then check for a dial tone by plugging a working telephone into the telephone wall jack. ■ If you have additional telephone services such as call waiting, call messaging, or voice mail, make sure that all messages are cleared and call waiting is disabled before using the modem.
Chapter 9: Troubleshooting Listen to the line using your telephone. Dial a single number (such as 1). When the dial tone stops, listen for line noise. Wiggle the modem cable to see if that makes a difference. Make sure that the connectors are free from corrosion and all screws in the wall or telephone wall jack are secure. You can also call your telephone service and have the telephone line checked for noise or low line levels.
Troubleshooting The modem is not recognized by your notebook ■ Make sure that the line connected to the modem is working and plugged into the appropriate port on your notebook. See “Right side” on page 12 to make sure that the connections have been made correctly. ■ If the modem shares the telephone line with another device, make sure that the telephone line is not in use (for example, someone is on the telephone, or another modem is in use). ■ Use the modem cable that came with your notebook.
Chapter 9: Troubleshooting The modem is noisy when it dials and connects When your modem tries to connect to another modem, it begins handshaking. Handshaking is a digital “getting acquainted” conversation between the two modems that establishes connection speeds and communication protocols. You may hear unusual handshaking sounds when the modems first connect. If the handshaking sounds are too loud, you can turn down the modem volume.
Troubleshooting Networks You cannot connect to your company network Every network is unique. Contact your company computer department or network administrator for help. For more information about setting up a network in your home, see the printed network guide that came with your notebook. Help and Support For more information about network troubleshooting, click Start, then click Help and Support. Type the keyword network troubleshooting in the Search box , then click the arrow.
Chapter 9: Troubleshooting Power Your notebook is not working on AC power ■ Make sure that your AC power adapter is connected correctly to your notebook. For more information, see “Connecting the AC adapter” on page 22. ■ If your notebook is plugged into a surge protector, make sure that the surge protector is connected securely to an electrical outlet, turned on, and working correctly. To test the outlet, plug a working device, such as a lamp, into the outlet and turn it on.
Troubleshooting The printer is on but will not print ■ Check the cable between the printer and your notebook. Make sure that it is connected to the correct port. ■ Make sure that the printer is online. Many printers have an online/offline button that you may need to press so the printer can start printing. Press the button to put the printer online. ■ Check the port and cable for bent or broken pins.
Chapter 9: Troubleshooting 3 Right-click the name of the printer you want to use. If the menu shows a check mark next to Use Printer Offline, click Use Printer Offline to clear the check mark. Help and Support For more information about printer troubleshooting, click Start, then click Help and Support. Type the keyword printer troubleshooter in the Search box , then click the arrow. ■ Wait until files have been printed before sending additional files to the printer.
Troubleshooting ■ Make sure that Mute controls are turned off. For more information about the mute setting, see “System key combinations” on page 33. Help and Support For more information about troubleshooting sound issues, click Start, then click Help and Support. Type the keyword sound troubleshooter in the Search box , then click the arrow. Touchpad or pointing device Touchpad or pointing device is not working ■ Make sure the touchpad or pointing device is turned on.
Chapter 9: Troubleshooting Video The projector or external monitor is not working ■ Make sure that you have pressed FN+F4 to activate the external monitor option. ■ Make sure that the monitor is turned on and that the video cable is connected correctly. TV out is not working 120 ■ Make sure that you have activated TV out. For more information, see “Viewing the display on a television” on page 57. ■ Make sure that the television is turned on and that the S-Video cable is connected correctly.
Telephone support Telephone support Before calling Gateway Customer Care If you have a technical problem with your notebook, follow these recommendations before contacting Gateway Customer Care: ■ Make sure that your notebook is connected correctly to a grounded AC outlet that is supplying power. If you use a surge protector, make sure that it is turned on. ■ If a peripheral device, such as a keyboard or mouse, does not appear to work, make sure that all cables are plugged in securely.
Chapter 9: Troubleshooting Telephone numbers Gateway offers a wide range of customer service, customer care, and information services. Automated troubleshooting system Service description How to reach Use an automated menu system and your telephone keypad to find answers to common problems.
Telephone support Self-help If you have how-to questions about using your Gateway-supplied hardware or software, see the following resources: ■ The printed or online documentation that came with your hardware or software. In many cases, additional product information and online documentation for Gateway-supplied hardware can be found in our Web site's Documentation Library. ■ This user guide and the Using Your Computer guide. ■ The software publisher's Web site.
Chapter 9: Troubleshooting 124 www.gateway.
Appendix A Safety, Regulatory, and Legal Information • Safety information • Regulatory statements • Notices 125
Appendix A: Safety, Regulatory, and Legal Information Important safety information Your Gateway system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Warning Always follow these instructions to help guard against personal injury and damage to your Gateway system.
Important safety information ■ Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer. Dispose of batteries according to the manufacturer’s instructions. ■ When the notebook is turned off, a small amount of electrical current still flows through the notebook.
Appendix A: Safety, Regulatory, and Legal Information Regulatory compliance statements Wireless Guidance Low power, Radio transmitting type devices (radio frequency (RF) wireless communication devices), may be present (embedded) in your notebook system. These devices may operate in the 2.4 GHz (i.e. 802.11B/G LAN & Bluetooth), 5.2 GHz (i.e. 802.11A LAN), and traditional cellular or PCS cellular bands (i.e. Cellular data modem).
Regulatory compliance statements Warning In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated.
Appendix A: Safety, Regulatory, and Legal Information The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the body, for use of a wireless device near the body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on. The power output of the wireless device (or devices), which may be embedded in your notebook, is well below the RF exposure limits as set by the FCC.
Regulatory compliance statements FCC declaration of conformity Responsible party: Gateway Companies, Inc. 610 Gateway Drive, North Sioux City, SD 57049 (605) 232-2000 Fax: (605) 232-2023 Product: ■ Gateway M460 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Appendix A: Safety, Regulatory, and Legal Information The Ringer Equivalence Number (REN) is used to determine the number of devices which may be connected to the telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
Regulatory compliance statements Caution To prevent radio interference to licensed service or co-channel Mobile Satellite systems, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Caution Wireless devices are not user-serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact Gateway for service.
Appendix A: Safety, Regulatory, and Legal Information Users should make sure, for their own protection, that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Warning To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself.
Regulatory compliance statements Laser safety statement All Gateway systems equipped with CD and DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact an authorized service location.
Appendix A: Safety, Regulatory, and Legal Information Notices Copyright © 2005 Gateway, Inc. All Rights Reserved 7565 Irvine Center Drive Irvine, CA 92618 USA All Rights Reserved This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any form, without prior consent in writing from Gateway. The information in this manual has been carefully checked and is believed to be accurate. However, changes are made periodically.
Index A AC adapter connecting 22 connector 13, 84 international adapters 68 accessories purchasing 18 safety precautions 127 application key 32 arrow keys 32 audio adjusting volume 34 back button 34 headphone jack 10, 83 microphone jack 10, 84 muting 34, 42 next button 34 pause button 33 play button 33 stop button 33 troubleshooting 118 volume down button 34 volume up button 34 audio CD cleaning 92 playing 50 B battery alternate power sources 68 bay 65 changing 65 charge indicator 10, 62 charge status 62 c
110 troubleshooting PC Card 115 types of memory cards supported 51 carrying case 18 CD cleaning 92 creating 50 inserting 49 playing audio 50 cellular phone memory cards 51 Certificate of Authenticity 17 changing bay modules 46 cleaning audio CD 92 case 91 CD 92 computer exterior 91 computer screen 92 DVD 92 keyboard 92 LCD panel 92 screen 92 clicking 36, 38 closing unresponsive program 29 connecting AC adapter 22 dial-up modem 25 external keyboard 31 external monitor 55 keyboard 31 port replicator 84 proje
digital video camera IEEE 1394 port 12, 83 directional keys 32 diskette troubleshooting 101 diskette drive locating 11 replacing drive module 46 status indicator 30 troubleshooting 101 display properties 55 switching 33 troubleshooting 102 docking port 14, 82 docking release latch 82 documentation Gateway Web site 3 help 5 Help and Support 5 online help 7 Using Your Computer 6 double-clicking 36, 38 double-tapping 38 dragging 37 drivers updating 4 drives CD 48 changing modular drives 46 diskette 11 DVD 11,
Help and Support topics 6 specifications 18 Firewire port 12, 83 Fn key 32, 33 folders opening 36, 38 function keys 32 G Gateway eSupport 18 model number 14, 17 serial number 17, 18 Web address 3 Web site 3 bay modules 46 devices 100 diskette drive 46 drives 46 DVD/CD-RW drive 46 hard drive 77 memory 73 PC Card 52 recordable CD drive 46 recordable DVD drive 46 secondary battery 46, 67 Internet troubleshooting 108, 112 IRQ conflicts 100 J H hard drive bay 14 indicator 30 installing 46, 77 replacing 77 sec
navigation 32 numeric keypad 32 Pad Lock 34 Standby 33 system 32 system key combinations 33 toggle display 33 Windows 32 L label model number 14 labels 17 laser printer 19 latch battery 14, 15 docking release 82 LCD panel release 10 modular bay 14 LCD panel cleaning 92 release latch 10 switching display 33 troubleshooting 102 LCD/CRT system key 33 lock Kensington cable 11, 82 M maintenance cleaning 91, 92 virus protection 93 Windows Update 96 memory bay 15 installing 73 purchasing 18 removing 73 replacing
network jack 13, 26, 83 troubleshooting 115 networking turning off wireless network 43 turning on wireless network 43 Norton Antivirus 93 NTSC/PAL jack 57 Num Lock status indicator 30, 34 system key 34 numeric keypad status indicator 30 using 32 O online help 5, 7 opening files 36, 38 folders 36, 38 LCD panel 10 notebook 10 programs 36, 38 shortcut menu 37, 39 option bays changing modules 46 release latches 14 P parallel port 84 password 115 PC Card adding 52 eject button 52 inserting 52 installing 52 rem
laser 19 parallel port 84 troubleshooting 116 USB port 12, 83 programs closing unresponsive 29 opening 36, 38 projector adding 55 color quality 56 display properties 55 screen resolution 56 R RAM See memory rebooting notebook 29 recalibrating battery 63 recharging battery 63 replacing See installing resetting notebook 29 restarting notebook 29 restoring system 96 right-clicking 37 rocker switch 35 S safety caring for computer 90 general precautions 126 guidelines for troubleshooting 98 static electricity
hard drive 30 location 16 memory card reader 30 modular drive 30 Num Lock 34 numeric keypad 30, 34 Pad Lock 30 power 10 recordable DVD drive 30 surge protector 24 Suspend 33 S-Video (TV) out jack 11, 57, 83 system identification label 14, 17 system keys combinations 33 locating 32 system restore 96 T technical support automated troubleshooting 122 eSupport 18 Technical Support 122 tips before contacting 121 tutorial service 122 telephone support 121 television playing DVD on 57 TV out jack 57 viewing displ
technical support 121 telephone support 121 touchpad 119 video 120 Web site connection speed 109 turning off notebook 28, 29 wireless network 33, 43 turning on notebook 27 wireless network 33, 43 tutoring fee-based 123 TV out (S-Video out) jack 11, 83 U undocking 86 updating device drivers 4 Norton AntiVirus 93 Windows 96 upgrading 71 USB port 12, 83 W waking up notebook 28 Web site Gateway 3 Windows key 32 Product Key Code 17 restoring 96 updating 96 Windows Media Player 50 Windows Security Center using
146 www.gateway.
MAN M460 MYSTQ USR GDE R0 11/04