Quick Reference Guide

www.gateway.com
49
Changing batteries
Replacing the battery
To replace the battery:
1 If your notebook is on and is connected to AC power,
go to Step 2.
-OR-
If your notebook is on and is not plugged into an AC
outlet, save your work and turn off the notebook.
2 Close the LCD panel.
3 Turn your notebook over so the bottom is facing up.
4 Slide the battery lock to the unlocked position.
5 Slide the battery release latch.
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for your Gateway
notebook. Discard used batteries according to local hazardous material
regulations.
The battery used in this device may present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate.
Dispose of the used battery promptly. Keep away from children.
Caution
If your notebook is connected to AC power, you can change the battery
while the notebook is turned on. If your notebook is not plugged into an AC
outlet, you must turn the notebook off while changing the battery.