Quick Reference Guide

CHAPTER 3: Maintaining and Upgrading Your Notebook www.gateway.com
36
8 If you are removing a module, gently press outward on the clip at each
end of the memory module until the module tilts upward.
9 Pull the memory module out of the slot.
10 Hold the new or replacement module at a 30-degree angle and press it
into the empty memory slot. This module is keyed so it can only be
inserted in one direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory bay.
11 Replace the memory bay cover, then tighten the cover screw.
12 Insert the battery, then turn your notebook over.
13 Connect the power adapter, modem cable, and network cable.
14 Reconnect all peripheral devices and replace any Express cards.
Clip
Clip