Owner's Manual

Troubleshooting
199
You see a “Disk is full” error message
■ Delete unnecessary files on the diskette.
■ Try a different diskette. Occasionally
diskettes are flawed and cannot be read by
the diskette drive.
■ Run Error checking on the diskette. If errors
are detected and corrected, try using the
diskette again. For instructions on running
Error checking, see “Checking the hard
drive for errors” on page 178.
You see a “Non-system disk”, “NTLDR is
missing”, or “Disk error” error message
■ Eject the diskette from the diskette drive,
then press E
NTER.
■ Make sure that the diskette you are using
is IBM-compatible.
The modular drive status indicator is lit
continuously
■ Remove the diskette from the drive. If the
indicator stays on, try restarting your
notebook.
Display
The screen is too dark
Tips & Tricks
For more information
about using your
keyboard, see the
poster or hardware
guide.
Adjust the brightness using the system keys.
The screen resolution is not correct
■ Change the screen resolution from the
Display Properties dialog box. For
instructions on changing the screen
resolution, see “Adjusting the screen
resolution” on page 156.