Owner's Manual

CHAPTER 6: Connecting Devices
78
Important
If the Enable TV and
TV buttons are grayed
out, your notebook
has not detected the
television. Make sure
that the television is
turned on and
connected correctly.
You may need to turn
your notebook off,
then back on again.
10 Click the Enable TV button if it is not
already enabled, then click Apply.
To view your notebook display on a television
(for notebooks that support the F4 key to
control the television feature):
1 With your notebook off, connect one end
of a standard S-Video cable to the S-Video
out jack on your notebook or optional
port replicator.
2 Connect the other end of the cable to the
Video in jack on your television or VCR.
3 Turn on the television or VCR.
4 Start your notebook.
5 Press FN+F4 several times until the
notebook display is shown on your
television.