Quick Reference Guide

Replacing the DVD drive

www.gateway.com

13 Insert the battery, then turn your notebook over.

14 Connect to the optional port replicator.

15 Reconnect the power adapter, modem cable, and network cable (if

disconnected in Step 4), then turn on your notebook.

Replacing the DVD drive

If your DVD drive becomes damaged, you can replace it with a similar drive

obtained from Gateway.

Important

Replace the DVD drive only with a similar

drive provided by Gateway.

Tools Required

You need a small Phillips screwdriver to

replace the DVD drive.

To replace the DVD drive:

1 Make sure that the DVD drive is empty.

2 Follow the guidelines under “Preventing static electricity discharge” on

page 32.

3 Turn off your notebook.

4 Disconnect from the optional port replicator.

5 Disconnect the AC adapter, modem cable, and network cable, if they are

connected to the notebook.

6 Disconnect all peripheral devices connected to the notebook and remove

any PC cards.

7 Turn your notebook over so the bottom is facing up, then remove the

battery. For more information, see “Changing batteries” on page 27.

Tips & Tricks

The DVD drive screw hole is marked with

a .

8 Remove the DVD drive screw and put it in a safe place.

9 Turn your notebook over so the top is facing up.

Screw