User’s Guide Gateway NV77H - 1
T A B L E O F C ON TE N TS Starting your computer 4 Optimizing battery life........................... Battery-low warning............................... 4 5 Software 6 Using Windows and your software............... 6 Welcome Center ..................................... 6 Internet security offer ............................ Productivity software ............................. Computer Basics 8 Gateway Recovery Management........... Safety and comfort ...........................................
Regulatory information 96 Environment 107 Software license 109 Index 112 Copyright © 2010. All Rights Reserved. Gateway NV77H User Guide Original Issue: 7 December 2010 Visit registration.gateway.com and discover the benefits of being a customer of Gateway. Remark: All images are for reference purposes only. Actual configuration may vary.
S T A R T I N G YOUR C OMPUTER Thank you for purchasing this Gateway computer! This guide has been designed to introduce you to the features of your computer and assist in your computing experience. After setting up and starting your computer, as shown in the setup instructions, it will ask you questions that will help you connect to the Internet. Your computer will then configure installed software.
Alternatively, use a network cable to connect directly to a network port on your router. Please refer to your ISP or router’s guide. REGISTRATION When using your computer for the first time, it is recommended that you register it. This gives you access to some useful benefits, such as: • Faster service from our trained representatives. • Membership in the Gateway community: receive promotions and participate in customer surveys. • The latest news from Gateway.
SOFTWARE INSTALLATION Your computer will automatically install software and prepare your computer for use. This may take some time, please do not turn off your computer; wait until the installation has finished. RECOVERY You should create recovery discs as soon as you are able. The Gateway Recovery Management program allow you to create recovery discs and then to restore or reinstall applications and drivers provided by Gateway. You will need a pack of writable DVDs.
Gateway website Remember to visit www.gateway.com - Check out the support section for up-to-date information, help, drivers and downloads. Warranty and contact information You can find information about the warranty for your computer and how to contact technical support in your computer’s Warranty.
C OM P U T E R B A S I C S SAFETY AND COMFORT Safety precautions Please follow the guidelines below to use your computer comfortably and to avoid health problems. Computer environment Make sure that the computer: • Is used on a stable surface, stand or table. A fall can seriously damage the computer. • Is not used on a surface that vibrates, or used when taking part in sport, exercise or other activities in a dynamic environment.
• Is not placed on a carpet or any other surface that may have an electrical charge. Cables Make sure that: • Cables are not strained and that there is no risk of people walking or tripping over them. • Other devices do not crush the cables. • The power cable is connected to the computer before connecting the power cable to the AC power outlet. • The power cable is unplugged from the power outlet before disconnecting the power cable from the computer.
Cleaning your computer • Always unplug your computer from the power outlet before cleaning it. • Do not use liquid or aerosol cleaners, use a damp cloth instead. • Never spray cleaning product directly on the screen. • If you spill liquid on your computer, switch it off immediately, unplug the AC adapter, remove the battery and make sure it is completely dry before switching it on again. Wait overnight if necessary.
• the product has been dropped or the case has been damaged • the product exhibits a distinct change in performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
• To protect your hearing, when using speakers or headphones, increase volume gradually until you can hear clearly and comfortably; do not increase the volume level after your ears have adjusted. Do not listen to high volumes for extended periods. Do not increase the volume to block out noisy surroundings; decrease the volume if you cannot hear people speaking near you. • The computer’s underside, power adapter and the air from ventilation slots may become hot during use.
consciousness, disorientation, any involuntary movement or convulsion, IMMEDIATELY discontinue use and consult your doctor. This may happen even if the person has no medical history of epilepsy.
G E T T I N G TO K N O W Y O U R C O M P U T E R After setting up your computer, as illustrated in the setup instructions, let us show you around your new Gateway computer.
TOP VIEW - DISPLAY 1 2 3 # Icon Item Description 1 Webcam Web camera for video communication. 2 Microphone Internal microphone for sound recording. 3 Display screen Also called Liquid-Crystal Display (LCD), displays computer output.
TOP VIEW - KEYBOARD 4 9 5 6 7 # Icon 8 Item 4 Power button / indicator 5 Keyboard 6 Touchpad 16 Description Turns the computer on and off. Indicates the computer's power status. For entering data into your computer. − Special keys are described on page 18. Touch-sensitive pointing device which functions like a computer mouse.
# Icon Item Power indicator Description Indicates the computer's power status. Indicates the computer's battery status. Battery indicator 7 − Charging: The light shows amber when the battery is charging. − Fully charged: The light shows blue when in AC mode. HDD indicator Indicates when the hard disk drive is active. Communication indicator Indicates the computer’s wireless connectivity device status.
Special keys Your computer’s keyboard includes keys that activate special functions. The function of each key is clearly marked with an icon. Icon Function Fn 18 Description Hotkey for second function E.g. press the Fn key to activate the F1 to F12 keys. Activates a second function on certain keys. Help Opens the User’s Guide for your computer. Gateway MyBackup Allows you to create backup copies of your computer; either the entire system or only selected files and folders.
Icon Function Description Previous Return to the previous media file. Next Jump to the next media file. Brightness down Decreases the screen brightness. Brightness up Increases the screen brightness. Opens the Social Networks application. Social Networking − If this application is not installed, the key will start your instant messenging application. Volume up Increases the sound volume. Volume down Decreases the sound volume. Speaker toggle Turns the speakers on and off.
Hotkeys The computer uses hotkeys (key combinations) to access function keys and navigation commands. To activate hotkeys, press and hold the Fn key (bottom left) before pressing the other key in the hotkey combination. Hotkey Fn + Special keys Function Description Function keys Activates the F1 to F12 keys. Fn + Home Scrolls to the beginning of a document. Fn + End Scrolls to the end of a document. Fn + Page up Scrolls up a page in a document.
FRONT VIEW 1 # Icon Item Multi-in-1 card reader 1 Description Accepts Secure Digital (SD), MultiMediaCard (MMC), Memory Stick PRO (MS PRO), xDPicture Card (xD). − Push to remove/install the card. Only one card can operate at any given time. REAR VIEW 1 # 1 Icon Item Battery bay Description Houses the computer's battery pack.
LEFT VIEW 1 # Icon 2 Item Kensington lock slot 3 4 5 6 7 Description Connects to a Kensington-compatible computer security lock. − Wrap the computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available. 1 2 Ventilation and cooling fan Allows the computer to stay cool. 3 External display (VGA) port Connects to a display device (e.g.
# Icon Item Description Headphones / speaker jack 7 Connects to audio line-out devices (e.g., speakers, headphones). − Supports compatible 3.5 mm headsets with built-in microphone (e.g. Acer smart handheld headsets). RIGHT VIEW 1 # Icon Item 2 34 5 6 7 Description Connect to USB devices (e.g., USB mouse, USB camera). 1 USB port 2 Optical drive Internal optical drive; accepts CDs or DVDs. 3 Optical disk access indicator Lights up when the optical drive is active.
# Icon Item Description 4 Optical drive eject button 5 Emergency eject hole 6 Ethernet (RJ-45) port Connects to an Ethernet 10/100/1000-based network. 7 DC-in jack Connects to your computer’s AC adapter. 24 Ejects the optical disk from the drive. Ejects the optical drive tray when the computer is turned off. − Carefully insert a straightened paper clip to eject the optical drive tray.
BASE VIEW 1 2 4 3 # Icon Item Description 1 Battery bay Houses the computer's battery pack. 2 Battery release latch Releases the battery for removal. Insert a suitable tool and slide to release. Memory compartment Houses the computer's main memory. Hard disk bay Houses the computer's hard disk (secured with screws). 3 4 Ventilation and cooling fan Allows the computer to stay cool. − Do not cover or obstruct the openings.
U P G R A D I N G YOUR COMPUTER EXPANDING THROUGH OPTIONS Your computer offers you many options for a complete computing experience. Connectivity options Ports allow you to connect peripheral devices to your computer. For instructions on how to connect different external devices to the computer, read the following section. Memory card reader Memory cards are used in a wide selection of digital cameras, PDAs, MP3 players and mobile phones. Inserting a memory card 1.
If the card contains some files, the Windows Auto Play window may appear (this depends on the contents of the card) and ask you if you wish to use a program to access the contents of the card. Select an option here if it is appropriate, otherwise select Cancel. If the card contains no files, or unknown files, a window will open showing the contents of the card. Removing a card from an memory card reader 1. Click on the Safely Remove Hardware icon in the Notification Area (next to the clock). 2.
Universal Serial Bus (USB) The USB port is a high-speed serial bus which allows you to connect USB peripherals without taking up system resources. Certain computers may include one or more USB 3.0 ports. These resemble standard USB ports, except they include additional internal connections and are blue. You may use USB 3.0 compatible devices with these ports to benefit from faster transfer speeds.
Follow these steps to connect an monitor to your computer: 1. Check that the computer is powered off and the monitor power switch is turned off. 2. Attach the video cable to the monitor port on the computer. Secure the cable connection with the screws provided. 3. Connect the monitor power cable and plug it into a properly grounded wall outlet. 4. Follow any setup instructions in the monitor's user's guide. 5. Turn on power to the monitor, then the computer. 6.
High-Definition Multimedia Interface (only for certain models) HDMI (High-Definition Multimedia Interface) is an industry-supported, uncompressed, all-digital audio/ video interface. HDMI provides an interface between any compatible digital audio/video source, such as a set-top box, DVD player, and A/V receiver and a compatible digital audio and/or video monitor, such as a digital television (DTV), over a single cable. Use the HDMI port on your computer to connect with high-end audio and video equipment.
P OWER S U P P L Y AC POWER ADAPTER Your computer can use the supplied external power adapter (a power 'brick') to run on AC power. A power cable is provided that is appropriate for the country where the computer was purchased. The power adapter provides adequate power to run your computer and recharge the battery pack at the same time. Caution: Do not cover or place objects on the AC adapter. Keeping the adapter clear of objects allows the adapter to cool properly during use.
Warning: The AC adapter and the underside of the computer can become hot after prolonged use. This is normal, but may cause injury with prolonged contact. BATTERY PACK The computer uses a battery pack that gives you extended use between charges. Battery pack characteristics The battery pack has the following characteristics: • Employs current battery technology standards. • Delivers a battery-low warning. The battery is recharged whenever you connect the computer to the AC adapter.
Maximizing the battery’s life Like all other batteries, your computer’s battery will degrade over time. This means that the battery's performance will diminish with time and use. To maximize your battery’s life, you are advised to adhere to the recommendations set out below. Conditioning a new battery pack Before you use a battery pack for the first time, there is a “conditioning” process that you should follow: 1. Insert the new battery without turning the computer on. 2.
Warning: Do not expose battery packs to temperatures below 0 °C (32 °F) or above 45 °C (113 °F). Extreme temperatures may adversely affect the battery pack. By following the battery conditioning process you condition your battery to accept the maximum possible charge. Failure to follow this procedure will prevent you from obtaining the maximum battery charge, and will also shorten the effective lifespan of the battery.
To install a battery pack: 1. Align the battery with the open battery bay; make sure that the end with the contacts will enter first, and that the top surface of the battery is facing up. 2. Slide the battery into the battery bay and gently push until the battery locks in place. To remove a battery pack: 1. Slide the battery release latch to release the battery. 2. Pull the battery from the battery bay.
Checking the battery level The Windows power meter indicates the current battery level. Rest the cursor over the battery/power icon on the taskbar to see the battery’s present charge level. Optimizing battery life Optimizing battery life helps you get the most out of battery operation, prolonging the charge/recharge cycle and improving recharging efficiency. You are advised to follow the suggestions set out below: • Purchase an extra battery pack.
Warning: Connect the AC adapter as soon as possible after the battery-low warning appears. Data will be lost if the battery to become fully depleted and the computer shuts down. When the battery-low warning appears, the recommended course of action depends on your situation: Situation Recommended Action The AC adapter and 1. Plug the AC adapter into the computer, and a power outlet are then connect to the mains power supply. available. 2. Save all necessary files.
Situation The AC adapter or a power outlet is unavailable. You have no spare battery pack. 38 Recommended Action 1. Save all necessary files. 2. Close all applications. 3. Shut down the operating system to turn off the computer.
SOFTWARE USING WINDOWS AND YOUR SOFTWARE Gateway computers include software to help you use your computer; the programs and categories available on your computer depend on the model purchased. Most of this software is ’pre-installed’ and ready to be used; however some software may be provided on a CD or DVD and must first be installed if you wish to use it. To do so, insert the installation CD or DVD.
from the most recent online threats and protects your personal data (bank account credentials, credit card numbers, passwords, and more). Productivity software Work Great with Microsoft® Office 2010 - Express your ideas, solve problems and simplify everyday projects with Office 2010. Photo editing - Easily edit and print your photos with Windows Live Photo Gallery. Then share them on Facebook, YouTube™ or Windows Live.
Windows Media Player Windows Media Player may be used to play MP3 or WMA audio files, CDs or most video files. Note: It is not recommended that you use Windows Media Player to play DVD movies. Other media players (such as Windows Media Center) provide additional playback options. Windows Media Center (optional) Certain computers include allin-one media ‘centers’ such as Windows Media Center.
Setup Caution: If your computer includes a remote control (page 11) or TV tuner (page 15) they must be connected and active before starting the media program for the first time. The first time you start the media program, it will start a setup wizard, which will configure some basic settings. If available, select the Express setup option, you may then configure additional options as needed.
AutoPlay The Windows AutoPlay function allows you to choose the way Windows handles media files on devices with removable storage (digital camera, CD, DVD, etc). If you have inserted a disk that contains files (such as a DVD, USB key or memory card), Windows will display a dialog box and ask you to choose how you want to open the files. For example, if you have inserted an audio CD or a DVD movie, Windows will automatically display a dialog box and ask you to choose how you want to play it.
Codecs A codec is software that is used to compress or decompress a digital media file, such as a song or video. Windows Media Player and other programs use codecs to play and create digital media files. For example, when you rip a song from an audio CD to your computer, the player uses the Windows Media Audio codec to compress the song into a compact WMA file.
movie region code information. Once your DVD drive is set to a region code, it will play DVD discs of that region only. You can set the region code a maximum of five times (including the first time), after which the last region code set will remain permanent. Recovering your hard disk does not reset the number of times the region code has been set. 2. The DVD movie will automatically play after a few seconds.
Social networks (optional) The Social Networks application allows you to quickly view your friends' updates, and make your own updates without leaving the desktop. You can recieve notifications and status updates directly to your desktop, using the sidebar to monitor multiple social networks (Facebook, YouTube and Flickr). Note: The Social Networks application is a pre-installed option and may not be installed on all computers.
automatically, click Log In, at the top of the Social Networks window. If you just want to create a new Facebook profile, click Sign Up and follow the instructions. Note: All social activities require Internet access. Make sure you are connected to the Internet before using this application. Authorize access To receive updates, you must authorize access to your social network accounts; each account must be activated separately.
YouTube If you already have a YouTube account, enter the account information and click the Log In button to activate access, otherwise select Sign up to YouTube to create an account. flickr If you already have a flickr account, click the Log In button to activate access, otherwise select Sign up to flickr to create an account. Confirm that you authorise full access, this will ensure all Social Networks features work normally.
Click the arrows in the bottom bar to see more pages, if there are more entries than can be shown on a page. Click on the question mark in the top bar Social Networks. to see the help file for Click on the arrow in the top bar to hide the full application and display a small alert bar on the top of your screen. Click the alert bar (below) to see the full window with a summary of your friends' activities.
The first button, and the section viewed when a tab is first selected, are the News Feed (for Facebook), Most Viewed for YouTube and Contacts for Flickr. If there are more entries than can be shown on on page, use the arrows in the bottom bar to see more pages. Changing settings Click the settings icon to access settings for the social networks. Live Update - If the Live Update button is active, you may download and install an updated version of the Social Networks application.
INTERNET Social Networks (optional) The Social Networks application allows you to quickly view your friends' updates, and make your own updates without leaving the desktop. You can recieve notifications and status updates directly to your desktop, using the sidebar to monitor multiple social networks (e.g. Facebook, YouTube and Flickr). Note: Applications vary depending on model. The Social Networks application is a pre-installed option and may not be installed on certain computers.
FIRST STEPS ON THE NET Protecting your computer It is vital to protect your computer from viruses and attacks over the Internet (see Internet security offer on page 39 and Security on page 61). A comprehensive Internet security program is offered when you first start your computer. You should activate this protection as soon as possible, certainly before you connect to the Internet. Choose an Internet Service Provider Using the Internet has become a natural part of daily computing.
Connection types Depending on your computer model, your location and your communication needs, you have several ways to connect to the Internet. Dial-up Some computers include a telephone dial-up (‘modem’) connector. This allows you to connect to the Internet using your telephone line. With a dial-up connection, you cannot use the modem and the telephone simultaneously on a single phone line.
these modems include an ‘router’ that provides network and wi-fi access. Cable A cable connection provides fast and ‘always-on’ Internet service via a cable television line. This service is generally available in large cities. You can use your telephone and watch cable TV at the same time you are connected to the Internet. 3G (WWAN or 'Wireless Wide-Area Network') A 3G connection allows you to use cellular networks (such as those used by a mobile phone) to connect to the Internet while away from home.
connection. You can set up a LAN using wired technologies (such as Ethernet) or wireless technologies (such as WiFi or Bluetooth). Wireless networks A wireless LAN or WLAN is a wireless local area network, which may link two or more computers without using wires. Setting up a wireless network is easy and allows you to share files, peripheral devices and an Internet connection.
between wired and wireless network. Most routers have a built-in DSL modem that will allow you access to a high speed DSL internet connection. The ISP (Internet Service Provider) you have chosen normally supplies a modem/router with the subscription to their services. Read carefully the documentation supplied with your Access point/router for detailed setup instructions.
Diagram of a working network 1. Access point/router 4 2. Desktop computer 3. Modem 5 4. Printer 1 5. Portable computer 6. PDA/Smartphone 7. Network (RJ45) 3 7 cables 2 6 Turning on/off a wireless network connection Most computers feature a ‘WiFi’ button that turns the network connection on or off.
may be dangerous to the operation of the aircraft, disrupt communications, and even be illegal. Surf the Net! To surf the Internet, you need a program called an Internet browser. Internet Explorer provides an easy and secure web browsing experience.
Internet Explorer features The image below shows the Internet Explorer browser’s start page. A brief description of some key aspects of the browser are listed below. 4 5 6 7 8 9 3 10 2 1 1. Quick tabs: Select and navigate through open tabs by displaying thumbnails of them all in a single window. 2. Favorites Center: Manage your favorite websites, your browsing history and your RSS Feed subscriptions in just a few clicks. 3.
5. Address bar: Type in an Internet address (e.g. www.gateway.com) and press the Enter key on your keyboard, this will take you directly to the address you typed. 6. Tabs: View multiple sites in a single browser window by switching from one site to another through tabs at the top of the browser frame. 7. RSS feeds: Allow you to keep up with your favorite websites in an automated manner. An icon on the toolbar indicates that the site offers a subscription feed that will notify you when content is updated.
will turn yellow and a warning message will be displayed if you visit a suspected phishing site. Gateway website To get you started why not visit our website, www.gateway.com. Gateway is dedicated to provide you with on-going personalized support. Check out our Support section to get help tailored to your needs. www.gateway.
Definitions What is a virus? Malicious software, typically called ‘viruses’, are programs designed to infect and damage computers. Most viruses are transmitted over the Internet, emails or malicious Web sites. A typical virus will replicate and pass itself undetected to multiple computers. Other forms of nuisance, such as Trojan horses, worms or spam can infect your computer in various ways, using up resources or clogging up a network.
actually monitor keystrokes and capture passwords, posing a serious security risk. What is malware? Malicious software, also known as malware, is software designed to deliberately harm your computer. For example, viruses, worms, and Trojan horses are malicious software. To help protect your computer against malware, make sure it is using up-to-date antivirus and antimalware software.
as quickly and easily as possible. The more difficult you make their job, the more likely they are to leave you alone and move on to an easier target. The tips below provide basic information on how you can prevent online fraud. Keep your computer current with the latest patches and updates One of the best ways to keep attackers away from your computer is to apply patches and other software fixes when they become available.
You could think of a firewall as a sort of "policeman" that watches all the data attempting to flow in and out of your computer on the Internet, allowing communications that it knows are safe and blocking "bad" traffic such as attacks from ever reaching your computer. The next line of defense many times is your antivirus software, which monitors all online activities such as email messages and Web browsing and protects an individual from viruses, worms, Trojan horse and other types of malicious programs.
accumulated. The following tips can help make your online experiences secure: • Selecting a password that cannot be easily guessed is the first step toward keeping passwords secure and out of the wrong hands. Strong passwords have eight characters or more and use a combination of letters, numbers and symbols (e.g., # $ % ! ?).
rarely possible, the following list contains some advice for how to share personal information safely online: • Keep an eye out for phony email messages. Things that indicate a message may be fraudulent are misspellings, poor grammar, odd phrasings, Web site addresses with strange extensions, Web site addresses that are entirely numbers where there are normally words, and anything else out of the ordinary.
you to login or provide other sensitive data. Another sign that you have a secure connection is the small lock icon in the bottom of your web browser (usually the right-hand corner). • Pay attention to privacy policies on Web sites and in software. It is important to understand how an organization might collect and use your personal information before you share it with them. • Guard your email address.
hard to believe, ask for someone else's opinion, read the fine print, or even better, simply ignore it. Review bank and credit card statements regularly The impact of identity theft and online crimes can be greatly reduced if you can catch it shortly after your data is stolen or when the first use of your information is attempted.
To open the Action Center, click on Start and Security > Action Center. > Control Panel > System Alternatively, if a security alert has been reported (in the Notification Area, next to the clock) then you can click on the notification balloon or doubleclick on the small Security Alert icon. The Action Center indicates the status and settings used for important applications that protect your computer.
Certain programs need access to the Internet to function properly, or even to function at all. If this is the case, you will usually be asked to allow access when you install a program, or the first time you use it. To check firewall settings, click on Start > Control Panel > System and Security > Windows Firewall. Note: When you first start to use a Firewall it is in a ‘Learning mode’, you may see pop-up windows alerting you that certain programs you know and trust wish to access the internet.
Windows Updates If you have an active Internet connection, Windows can check for important updates for your computer and install them automatically. These updates include security patches and program updates that can improve your computing experience and help protect your computer against new viruses and attacks. Windows Defender Windows Defender helps protect your computer against malicious and unwanted software, such as spyware and adware. Windows Defender is installed and turned on by default.
Caution: Please note that most security software suites provide similar functionality and will disable Windows Defender in order to improve system performance. User Account Control The User Accounts control panel can help prevent unauthorized changes to your computer. User Accounts will ask you for permission or an administrator password before performing actions that could potentially affect your computer's operation or that change settings that affect other users.
Internet Explorer security settings Internet sites use small files called cookies to keep track of user preferences and information. You can adjust your Internet browser's security settings to determine how much -or how little- information you are willing to accept from a Web site. To access Internet Explorer security settings: 1. In Internet Explorer, click on Tools > Internet Options. 2. In the Privacy tab, move the slider up or down to select a setting.
HELPDESK SAFE COMPUTING To make the most of your new computer and ensure it runs smoothly for a long time, you should use the programs below and regularly perform the actions described in this guide. Maintenance Recommended maintenance tasks There are several tasks you should perform periodically (about once per month) to ensure your computer stays in good health: Error checking Using the Check Disk tool regularly prevents your system from getting unreliable and information getting lost.
3. Tick Automatically fix file system errors in the options area. If you tick Scan for and attempt recovery of bad sectors, your computer will carry out the physical error checking when you next restart your computer. Click on Start to proceed. Disk Cleanup The Disk Cleanup Wizard helps free up space on your disk drive. It searches your drive and displays unused files, such as temporary Internet files, files in the Recycle Bin and other temporary files that you may safely delete. 1.
Disk Defragmenter With the creation and deletion of files over time, scattering occurs all over the hard disk area and affects performance. The Disk Defragmenter helps you rearrange the items stored on your hard drive to make your computer run faster and more efficiently. Running the Disk Defragmenter once a month (depending on computer usage) will decrease wear and tear on your hard drive and thus decrease the chance of a fault developing at a later date. 1.
Manage your hard disk drive (HDD) Check the remaining free space on your hard disk drive 1. Click on Start > Computer. 2. Right-click on the Gateway icon and select Properties. 3. The Hard Disk Properties window displays the amount of used space and free space on your hard disk. If your hard disk is almost full (less than 200 MB remaining), you should consider freeing some space. To see easily how much space is used and how much is left, simply place your pointer over the hard disk drive icon.
2. Uninstall the programs you no longer use: Click on Start Features. > Control Panel > Programs > Programs and 3. Archive files on an external hard disk drive, recordable CDs or DVDs (if your computer is equipped with a CD or DVD writer) and delete them from the hard disk. Run Windows System Tools Windows includes some convenient tools to keep your computer in good shape.
Windows System Restore. System Restore monitors changes to your computer and automatically creates restore points that store your computer’s configuration each time a major change occurs (such as installing programs). It can undo harmful changes to your computer and restore settings and performance without removing your personal data files (such as documents, browsing history, photos, favorites, or emails). Note: If you only need to uninstall a program, do not use System Restore.
If you cannot access the Windows desktop: 1. Press the Alt+F10 key upon start-up when the Gateway logo appears. This will open the Recovery Program. 2. Select Windows System Restore and click Next. Your computer will automatically restart and open System Restore. System Restore options Restore your computer to an earlier time This option will return to your computer to how it was on an earlier date, without affecting your personal documents or emails (it will not restore lost documents either).
Create a Restore Point Windows creates restore points automatically at regularly scheduled times or before certain programs or drivers are installed. This option allows you to create your own restore points when you need to. 1. Click Start > Control Panel > System and Security > System. Click on System protection in the sidebar and then click the Create... button. 2. Enter a description to identify this restore point. System Restore automatically adds the date and time to this name. 3.
• Perform updates when prompted by Windows Action Center. • Use Microsoft Windows Automatic Updates. • Run Windows Update. Internet security Norton Internet Security, combined with other security applications can protect your computer from Internet attacks and ensure that the latest security updates have been downloaded and installed on your computer. Norton Internet Security performs automatic updates through Live Update.
Windows Remote Assistance Remote Assistance allows a Windows user to temporarily take over a remote Windows computer over a network or the internet to resolve issues. Remote Assistance makes it possible to diagnose and repair problems with a computer without personally visiting it. You can access Remote Assistance by clicking on Start > All Programs > Maintenance > Windows Remote Assistance.
RECOVERY GATEWAY RECOVERY MANAGEMENT Note: Gateway Recovery Management is only available with a preinstalled Windows operating system. If your computer experiences problems that are not recoverable by other methods, you may need to reinstall the Windows operating system and factory-loaded software and drivers. To ensure you can recover your computer when needed, you should create a recovery backup as soon as possible.
2. To create recovery discs for the hard drive’s entire original contents, including Windows and all factory-loaded software and drivers, click Create Factory Default Disc. - OR To create recovery discs for only the factory-loaded software and drivers, click Create Drivers and Applications Backup Disc. Important: We recommend that you create each type of recovery disc as soon as possible.
The Create Factory Default Backup dialog box opens. This dialog box tells you the number of blank, recordable discs you will need to complete the recovery discs. Make sure that you have the required number of identical, blank discs ready before continuing.
3. Insert a blank disc into the drive indicated in the Backup to list, then click Next. You will be shown the backup progress on the screen. The drive ejects each disc as it completes burning it. 4. Remove the disc from the drive and mark it with a permanent marker. Important: Write a unique, descriptive label on each disc, such as ‘Windows Recovery Disc 1 of 2’ or ‘Apps/Drivers Recovery disc’. Make sure you keep the discs in a safe place that you will remember. 5.
RECOVERING YOUR SYSTEM If Gateway support did not help fix your problem, you can use the Gateway Recovery Management program. This will restore your computer to the same state as when you purchased it, while giving you an option to retain all settings and personal data for later retrieval. To recover your system: 1. Perform minor fixes. If only one or two items of software or hardware have stopped working correctly, the problem may be solved by reinstalling the software or the device drivers.
If nothing else has solved the problem and you want to reset your system to factory condition, see “Returning your system to its factory condition” on page 92. Types of recovery Recovering pre-installed software and drivers As a troubleshooting step, you may need to reinstall the software and device drivers that came pre-installed on your computer from the factory. You can recover using either your hard drive or the backup you have created.
2. Click on the Restore tab, then click Reinstall Drivers or Applications. The Gateway Application Recovery main menu opens. 3. Click on Contents. A list of software and device drivers opens. 4. Click on the install icon for the item you want to install, then follow the on-screen prompts to complete the installation. Repeat this step for each item you want to reinstall.
Help: For more information about using Microsoft System Restore, click Start, then click Help and Support. Type windows system restore in the Search Help box, then press Enter. To return to a restore point: 1. Click on Start > Control Panel > System and Security > Action Center, then click on Recovery. 2. Click on Open System Restore, then Next. 3. Click on he restore point you want, click on Next, then Finish. A confirmation message box appears. 4. Click on Yes.
• If you cannot run Windows and your original hard drive is still working, see “Recovering from the hard drive during startup” on page 94. • If you cannot run Windows and your original hard drive has been completely re-formatted or you have installed a replacement hard drive, see “Recovering from your recovery discs” on page 94. Recovering from within Windows To reinstall Windows and all pre-installed software and drivers: 1.
Recovering from the hard drive during startup To reinstall Windows and all pre-installed software and drivers: 1. Turn on your computer, then press Alt+F10 during startup. Gateway Recovery Management opens. 2. Click on Restore system from factory default. Caution: Continuing the process will erase all files on your hard drive. 3. Click on Next. Your hard drive’s original, factory-loaded contents are recovered. This process will take several minutes.
6. Your computer will restart. 3. During startup, press F12 to open the boot menu. The boot menu allows you to select which device to start from, such as the hard drive or an optical disc. 4. Use your arrow keys to select the line CDROM/DVD (this line may start with ’IDE 1...’), then press Enter. Windows installs from the recovery disc you inserted. 5. Insert the second recovery disc when prompted, then follow the onscreen prompts to complete the recovery.
REGULATORY INFORMATION WIRELESS DEVICES Caution: Wireless devices are not user-serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact Gateway for service information. Caution: The transmitting device embedded in this computer may not be used with any antenna other than the one provided with the computer. Warning: Using wireless devices while flying in aircraft is prohibited.
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation.
TELECOMMUNICATIONS PER PART 68 OF THE CODE OF FEDERAL REGULATIONS (CFR 47) (APPLICABLE TO PRODUCTS FITTED WITH USA MODEMS) Your modem complies with Part 68 of the Code of Federal Regulations (CFR 47) rules. On the computer or modem card is a label that contains the FCC registration number and Ringer Equivalence Number (REN) for this device. If requested, this information must be provided to the telephone company. A telephone line cord with a modular plug is required for use with this device.
− Perform such activities in the off-peak hours such as early morning or late evenings.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada. TELECOMMUNICATIONS PER INDUSTRY CANADA CS-03 (FOR PRODUCTS FITTED WITH AN ICCOMPLIANT MODEM) The Industry Canada label identifies certified equipment.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
EN60950-1: Product Safety. If your computer includes a telecommunication network board, the input/output socket is classified as Telecommunication Network Voltage (TNV-3). Note for computers equipped with wireless controllers and wired modems: Hereby, Gateway, declares that the wireless devices provided with this computer include a low power radio transmitter in full compliance with the essential requirements and other relevant provisions of Directive 1999/05/EC for Low Voltage, EMC and RF of the R&TTE.
Radio frequency interference The manufacturer is not responsible for any radio or TV interference caused by unauthorised modifications to this equipment. CONNECTIONS AND REMOTE EARTHS PELV (Protected Extra Low Voltage) To ensure the extra-low voltage integrity of the equipment, only connect equipment with mains-protected electrically-compatible circuits to the external ports. SELV (Safety Extra Low Voltage) Every input and output of this product is classified as Safety Extra Low Voltage.
Under no circumstances should the user attempt to disassemble the power supply. The power supply has no user-replaceable parts. Inside the power supply are hazardous voltages that can cause serious personal injury. A defective power supply must be returned to your dealer. Power cables and plug This Product requires a three-wire grounded power cord and plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the plug.
During product certification, Gateway used the following cable quality: − USB2.0 Certified Cables from Hama 46778 − IEEE1394 shielded FireWire from Hama 50011 − RCA-RCA shielded Audio/Video Cables from Thomson KHC001M, KHC012M, KHC028M − Stereo Jack shielded Audio cables from Hama 43330H, 42714H Heat Build-up and Portable Computers The AC adapter and the underside of the computer can become hot after prolonged use. Sustained physical contact with either should be avoided.
PACKAGING The packaging of this product is compliant with the European Environmental Directive 94/62/EC from December 20 th 1994 and its equivalent in the French Legislation by the Decree 98-638 from july 20 th 1998.
ENVIRONMENT OUR COMMITMENT TO ENVIRONMENTAL PROTECTION Environment has been at the heart of our products. Gateway is committed to limit the environmental impact of its products during product lifecycle. Starting at design phase, with a very strict procurement policy, maximum attention is given to electronic components in order to limit their weight in heavy metals such as lead, cadmium, chromium, mercury, etc. Suppliers are asked, for each part of any product, to respect all regulations.
with your local authority, or by returning your old equipment to your retailer if you are replacing it. For information, visit www.gateway.com/about/corp_responsibility/ environment.php. Battery disposal (when applicable) Before disposing of your equipment ensure that you have removed any batteries that may be fitted in the equipment. European law states that batteries must be collected for disposal separately from household waste. Do not throw your used batteries in the dustbin.
S O F T W A R E L IC E NS E Note: Most of the software applications are already preinstalled on your Gateway computer. They are ready to use or to set up. However, some titles require a CD or DVD to run. You will find these discs in your computer's packaging. Gateway License Agreement (CD and/or DVD Products). This copy of the original is your proof of license. Please treat it as valuable property. Important! Read carefully before installing the software. The following License Agreement applies to you.
is not “in use.” If the anticipated number of users of the SOFTWARE will exceed the number of applicable Licenses, then you must have a reasonable mechanism or process in place to assure that the number of persons using the SOFTWARE concurrently does no exceed the number of Licenses.
The Free Software is distributed in the hope that, but it will be useful WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The provisions of the GNU General Public License shall always apply. You may access http://www.gnu.org directly to obtain a copy of the GPL or write to the free Software Foundation, Inc. and request a copy. The address of the Free Software Foundation, Inc is: 59 Temple Place - Suite 330, Boston, MA, 02111-1307, USA.
I NDEX A Audio CDs .............................................................. 41 Autoplay ................................................................. 42 B Batteries ............................................................... 108 maximizing life .......................................... battery disposal ............................................... 108 optimizing..................................................... battery pack removing ......................................................
E Electronic Program Guide ............................ 42 Epilepsy warning ............................................... 13 Environment ...................................................... 107 Error checking ..................................................... 75 F Firewall ............................................................. 63, 70 front view .............................................................. 21 H HDD (Hard Disk Drive) Health precautions ........................................
P ports .......................................................................... 26 PowerDVD ............................................................. 42 Power cords ............................................................. 9 R Recovery Removing hardware ........................................ 27 System Restore ........................................... 80 Removing software .......................................... 78 Regulatory Information....................... 96, 107 Restore points .......
right .................................................................. 23 W Warranty.................................................................... 7 Welcome Center ................................................ 39 WiFi ............................................................................ 55 Windows System Restore ........................................... 80 Using Windows .......................................... 39 Welcome Center ........................................
