Gateway Notebook User Guide
Contents 1 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Gateway Web site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Help and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Searching for a topic . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the optional EZ Point pointing device . . . . . . . . . . . . . . . . . . . . . . . .38 Replacing the EZ Point pointing device cap . . . . . . . . . . . . . . . . . . . .39 Turning the touchpad or pointing device on or off . . . . . . . . . . . . . . . .40 Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Turning your wireless radio on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 4 Using Drives and Ports . . . . . . . . .
7 Using the Optional Port Replicator . . . . . . . . . . . . . . . . . . . . . . . 85 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching to the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 Pointing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Getting Help • Using the Gateway Web site • Using Help and Support • Using BigFix • Using Your Computer guide • Using online help 1
Chapter 1: Getting Help Thank you for purchasing our notebook! You have made an excellent decision choosing Gateway. We are sure that you will be pleased with the outstanding quality, reliability, and performance of your new notebook. Each and every Gateway notebook uses the latest technology and passes through the most stringent quality control tests to ensure that you are provided with the best product possible.
Gateway Web site Gateway Web site Gateway's online support is available 24 hours per day, 7 days per week and provides the most current drivers, product specifications, tutorials, and personalized information about your notebook. Visit the Gateway Support Web site at support.gateway.com. Using Support The Support site is divided into seven major areas: â– Support Home â– Product Support â– Downloads â– Customer Service â– Upgrade Center â– Resources â– Contact Us www.gateway.
Chapter 1: Getting Help Support Home Click Support Home. To view support documents for your notebook, type your serial number in the Serial Number box, then click Submit. Click the arrow button to open the Select Your Computer Product box, then click Notebook Computers to access product documentation, specifications, and guides for all Gateway notebooks. Product Support Click Product Support to view a list of all the products that Gateway supports.
Help and Support Help and Support Your notebook includes Help and Support, an easily accessible collection of help information, troubleshooters, and automated support. Use Help and Support to answer questions about Windows and to help you quickly discover and use the many features of your Gateway notebook. To start Help and Support: â– Click Start, then click Help and Support. Help and Support opens. You can find help information by clicking a link, performing a search, or browsing the index. www.
Chapter 1: Getting Help Searching for a topic To search for a topic in Help and Support, type a word or phrase (keyword) in the Search box located at the top of any Help and Support screen, then click the arrow button. For each search, you receive the following search result types: â– Suggested Topics - These topics are located in Help and Support and are relevant to your search topic.
Using Your Computer guide Using Your Computer guide In addition to this guide, the Using Your Computer guide has been included on your hard drive. The Using Your Computer guide includes information on using Windows, using the Internet, sending a fax, and changing power-saving settings as well as other topics. To access the Using Your Computer guide: â– Click Start, All Programs, then click Gateway Documentation.
Chapter 1: Getting Help You can search for information by viewing the help contents, checking the index, searching for a topic or keyword, or browsing through the online help. Gateway contact information To help you locate Gateway contact information, you can find the Gateway Web site, Online Support, and technical support contact information on the label located on the bottom of your notebook. Website: Online Support: Tech Support Phone: Hours: 8 www.gateway.
Chapter 2 Checking Out Your Gateway Notebook • Identifying features • Locating your notebook’s model and serial number • Locating the Microsoft Certificate of Authenticity • Locating the specifications for your notebook • Purchasing accessories 9
Chapter 2: Checking Out Your Gateway Notebook Front Speaker Component Headphone jack Battery LCD panel charge release Microphone jack latch indicator Power indicator Icon Speaker Description Speakers Provide audio output when headphones or amplified speakers are not plugged in. LCD panel release latch Open the LCD panel by sliding the release latch. Battery charge indicator â– â– â– â– Power indicator â– â– â– LED LED LED LED blue - battery is fully charged. purple - battery is charging.
Left Left Kensington lock slot Ventilation fan S-Video out jack Component Icon Modular bay Description Kensington™ lock slot Secure your notebook to an object by connecting a Kensington cable lock to this slot. S-Video out jack Plug an S-Video device, such as a television, into this jack. For more information, see “Viewing the display on a television” on page 57. Ventilation fan Helps cool internal components. Warning: Do not work for long periods with the notebook resting on your lap.
Chapter 2: Checking Out Your Gateway Notebook Right Memory USB ports card reader Ethernet jack USB ports IEEE 1394 port Modem jack PC Card slot Component Icon Description PC Card slot Insert one Type II PC Card into this slot. For more information, see “Adding and removing a PC Card” on page 53. IEEE 1394 port Plug an IEEE 1394 (also known as Firewire® or i.Link®) device (such as a digital camcorder) into this 4-pin IEEE 1394 port.
Back Component Icon Description Ethernet jack Plug a 10/100/1000 Ethernet network cable into this jack. The other end of the cable can be plugged into a cable modem, DSL modem, or an Ethernet network jack. For more information, see “Connecting to a cable or DSL modem or to an Ethernet network” on page 26. Modem jack Plug a modem cable into this jack. For more information, see “Connecting the dial-up modem” on page 25.
Chapter 2: Checking Out Your Gateway Notebook Bottom Docking port Battery Battery lock Battery latch Customer care label Memory bay System label Website: Online Support: Tech Support Phone: Hours: Hard drive bay Component Docking port Modular bay latch Icon Description Connect the port replicator to this port. Warning: Power is passed through this port. This docking connection is certified to UL 1950 for use only with port replicators designed for your Gateway notebook.
Keyboard area Component Icon Description Hard drive bay The hard drive is located in this bay. For more information, see “Replacing the hard drive kit” on page 80. Customer care label Includes the customer care contact information. For more information, see “Gateway contact information” on page 8. Battery latch Slide to release the battery. For more information, see “Replacing the main battery” on page 67.
Chapter 2: Checking Out Your Gateway Notebook Component Icon Description Power button Press to turn the power on or off. You can also configure the power button for Standby/Resume mode. For more information on configuring the power button mode, see “Changing Power-Saving Settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. Keyboard Provides all the features of a full-sized computer keyboard.
Identifying your model Identifying your model Important The labels shown in this section are for informational purposes only. Label information varies by model, features ordered, and location. Gateway model and serial number The label on the bottom of your notebook contains information that identifies your notebook model and its features. Gateway Customer Care will need this information if you call for assistance.
Chapter 2: Checking Out Your Gateway Notebook Finding your specifications For more information about your notebook, such as memory size, memory type, and hard drive size, visit Gateway’s Support site at support.gateway.com. The Support site also has links to additional Gateway documentation and detailed specifications. For more information, see “Gateway Web site” on page 3. Accessories To order accessories, visit the Accessory Store at accessories.gateway.com.
Accessories Printers You can attach almost any type of printer to your notebook. The most common types are inkjet and laser printers, which print in color or black and white. Inkjet printers and cartridges are relatively inexpensive, but they are slower than laser printers. Using an inkjet color printer, you can print pictures, banners, and greeting cards, as well as documents. Laser printers and cartridges are more expensive, but they print much faster than inkjet printers.
Chapter 2: Checking Out Your Gateway Notebook 20 www.gateway.
Chapter 3 Getting Started • Installing the battery • Connecting the AC adapter • Connecting the dial-up modem • Connecting to a cable or DSL modem or to an Ethernet network • Turning your notebook on and off • Using the status indicators • Using the keyboard, the EZ Pad touchpad, and the optional EZ Point pointing device • Adjusting the volume • Connecting to a wireless network 21
Chapter 3: Getting Started Installing the battery To install the battery: 1 2 3 Close the LCD panel. 4 Slide the battery lock to the locked position. Turn your notebook over so the bottom is facing up. Hold the battery label-side down and slide it into the open battery slot until the battery clicks into place. Connecting the AC adapter You can run your notebook using an AC adapter or your notebook’s battery. The battery was shipped to you partially charged.
Connecting the AC adapter To connect the AC adapter: 1 Connect the power cord to the AC adapter. Caution Make sure that you use the AC adapter that came with your notebook or one of the same type purchased from Gateway. Replace the power cord if it becomes damaged. The replacement cord must be of the same type and voltage rating as the original cord or your notebook may be damaged. 2 Connect the AC adapter to your notebook’s power connector. www.gateway.
Chapter 3: Getting Started 3 Plug the power cord into a wall outlet. The battery charge indicator turns on (see “Front” on page 10 for the location of the battery charge indicator). If the battery charge indicator does not turn on, unplug the adapter from your notebook, then plug it back in. 4 When you finish using your notebook for the first time, turn off your notebook and leave your notebook connected to AC power until the battery charge indicator turns blue.
Connecting the dial-up modem Connecting the dial-up modem Your notebook has a built-in 56K modem that you can use to connect to a standard telephone line. Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. To connect the modem: 1 Insert one end of the modem cable into the modem jack right side of your notebook. 2 Insert the other end of the modem cable into a telephone wall jack. The modem will not work with digital or PBX telephone lines.
Chapter 3: Getting Started Connecting to a cable or DSL modem or to an Ethernet network Your notebook has a network jack that you can use to connect to a cable or DSL modem or to an Ethernet network. To connect to a cable or DSL modem or to an Ethernet network: 26 1 Insert one end of the network cable into the network jack the right side of your notebook. 2 Insert the other end of the network cable into a cable modem, DSL modem, or Ethernet network jack. 3 Start your notebook. www.gateway.
Starting your notebook Starting your notebook To start your notebook: 1 Slide the latch on the front of your notebook, then lift the LCD panel. 2 Press the power button located above the keyboard. The power button is preset to On/Off mode. However, you can also set it to function in Standby/Resume mode. Tips & Tricks 3 For more information about changing the power button mode, see “Changing Power-Saving Settings” in Using Your Computer which has been included on your hard drive.
Chapter 3: Getting Started Warning Do not work for long periods with the notebook resting on your lap. If the air vents are blocked, the notebook may become hot enough to harm your skin. Caution Provide adequate space around your notebook so air vents are not obstructed. Do not use the notebook on a bed, sofa, rug, or other similar surface.
Restarting (rebooting) your notebook Restarting (rebooting) your notebook If your notebook does not respond to keyboard, touchpad, or mouse input, you may have to close programs that are not responding. If closing unresponsive programs does not restore your notebook to normal operation, you may have to restart (reboot) your notebook. To close unresponsive programs and restart your notebook: 1 2 3 4 5 6 Press CTRL+ALT+DEL. The Windows Security dialog box opens. Click Task Manager.
Chapter 3: Getting Started Status indicators Status indicators inform you when a drive is being used or when a button has been pressed that affects how the keyboard is used. Wireless network Num lock Caps lock Indicator Icon Wireless network (optional) Description â– â– Caps lock â– A Num lock Module â– â– 1 â– â– â– â– Hard drive â– â– 30 Hard drive Module LED on - Wireless radio is turned on. LED off - Wireless radio is turned off. LED on - Caps lock is turned on.
Using the keyboard Using the keyboard Your notebook features a full-size keyboard that functions the same as a desktop computer keyboard. Many of the keys have been assigned alternate functions, including shortcut keys for Windows, function keys for specific system operations, and the Num Lock keys for the numeric keypad.
Chapter 3: Getting Started Key types The keyboard has several different types of keys. Some keys perform specific actions when pressed alone and other actions when pressed in combination with another key. Key type Function keys Icon Description Press these keys labeled F1 to F12 to perform actions in programs. For example, pressing F1 may open help. Each program uses different function keys for different purposes. See the program documentation to find out more about the function key actions.
Using the keyboard System key combinations When you press the FN key and a system key at the same time, your notebook performs the action identified by the text or icon on the key. Press and hold FN, then press this system key... To... Turn the optional wireless network on or off. For more information, see the printed network guide that came with your notebook. Warning: Radio frequency wireless communication can interfere with equipment on commercial aircraft.
Chapter 3: Getting Started Press and hold FN, then press this system key... To... Skip back one CD song or DVD track. Skip ahead one CD song or DVD track. Turn on Num Lock so you can use the numeric keypad. Press this key combination again to turn off Num Lock. The Num Lock status indicator appears when this function is turned on. Increase the brightness of the display. Decrease the brightness of the display. Mute the sound. Press the key combination again to restore the sound.
Using the EZ Pad touchpad Using the EZ Pad touchpad The EZ Pad™ consists of a touchpad, two buttons, and a scroll zone. Touchpad Scroll zone Left button Right button When you move your finger on the touchpad, the pointer (arrow) on the screen moves in the same direction. You can use the scroll zone to scroll through documents. Use of the scroll zone may vary from program to program. www.gateway.
Chapter 3: Getting Started You can use the EZ-Pad left and right buttons below the touchpad to select objects. Tips & Tricks To... For instructions on how to adjust the double-click speed, pointer speed, right-hand or left-hand configuration, and other touchpad settings, see “Changing the mouse or touchpad settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. Do this...
Using the EZ Pad touchpad To... Do this... Access a shortcut menu or find more information about an object on the screen. Position the pointer over the object. Quickly press and release the right button once. This action is called right-clicking. Move an object on the screen. Position the pointer over the object. Press the left button and hold it down, then use the touchpad to move (drag) the object to the appropriate part of the screen. Release the button to drop the object where you want it.
Chapter 3: Getting Started Using the optional EZ Point pointing device The EZ Point™ consists of a pointing device and two buttons. Important Your notebook was sent from Gateway with the pointing device turned on. For instructions on how to turn the pointing device on or off, see “Turning the touchpad or pointing device on or off” on page 40.
Using the optional EZ Point pointing device Button Function Right Click to access a shortcut menu or find more information about an object on the screen. Tips & Tricks For instructions on how to adjust the double-click speed, pointer speed, right-hand or left-hand configuration, and other pointing device settings, see “Changing the mouse or touchpad settings” in Using Your Computer which has been included on your hard drive.
Chapter 3: Getting Started Turning the touchpad or pointing device on or off You can turn the touchpad and optional pointing device on or off, depending on which device you prefer to use. To turn the touchpad or optional pointing device on or off: 40 1 Click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Printers and Other Hardware. 2 Click/Double-click the Mouse icon. The Mouse Properties dialog box opens. www.gateway.
Using the optional EZ Point pointing device 3 Click the Device Settings tab. 4 Select the device you want to turn on or turn off, then click Enable or Disable. www.gateway.
Chapter 3: Getting Started Adjusting the volume You can use the volume control to adjust the overall volume your notebook. To adjust the overall volume level using hardware controls: ■If you are using external speakers, turn the knob on the front of the speakers. -ORUse the mute and volume control buttons on the keyboard. For more information, see “System key combinations” on page 33.
Turning your wireless radio on or off Turning your wireless radio on or off Warning Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. IEEE 802.11a, IEEE 802.11b, and IEEE 802.11g communication devices are examples of devices that provide wireless communication.
Chapter 3: Getting Started 44 www.gateway.
Chapter 4 Using Drives and Ports • Changing modules • Using CD and DVD drives • Using the media card reader • Using a PC Card • Viewing the display on a monitor or projector • Viewing the display on a television • Connecting a video camera to your notebook 45
Chapter 4: Using Drives and Ports Changing modules Your notebook’s modular bay supports different bay modules, such as a CD drive, combination DVD/CD-RW drive, DVD±RW/CD-RW drive, a second hard drive, a diskette drive, or a secondary battery. Modular bay Modular bay latch Security screw (optional) To change bay modules: 1 If you are removing a disc or diskette drive, make sure that the drive is empty. 2 Click the remove hardware icon in the taskbar, the module you are removing, then click Stop.
Changing modules 3 4 Close the LCD panel. 5 6 Turn your notebook over so the bottom is facing up. Disconnect your notebook from the optional port replicator (see “Disconnecting from the port replicator” on page 90). Remove the security screw if your notebook has one. Security screw 7 8 9 10 11 12 13 Slide the bay module release latch. The module moves out slightly. Slide the bay module out. Firmly push the new bay module straight into the bay until the latches click into place.
Chapter 4: Using Drives and Ports 14 If your notebook is on, click OK to continue working on your notebook. - OR If your notebook is off, turn it on. 48 www.gateway.
Using the DVD drive Using the DVD drive You can use your notebook to enjoy a wide variety of multimedia features. Important Some music CDs have copy protection software. You may not be able to play these CDs on your notebook. Identifying drive types Your Gateway notebook may contain one of the following drive types. Look on the front of the drive for one or more of the following logos: If your drive has this logo... This is your drive type... Use your drive for...
Chapter 4: Using Drives and Ports Inserting a CD or DVD Eject button Manual eject hole To insert a CD or DVD: 1 Press the eject button on the DVD drive. After the disc tray opens slightly, pull the tray completely open. 2 Place the disc in the tray with the label facing up, then press down carefully on the disc until it snaps into place. Important 3 50 When you place a single-sided disc in the tray, make sure that the label side is facing up.
Using the DVD drive Playing a CD Use a music program or Windows Media Player on your notebook to: ■Play music CDs ■Create MP3 and WMA music files from your music CDs ■Edit music track information ■Use your music files to build a music library Tips & Tricks For more information about playing CDs, see “Using Windows Media Player” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation.
Chapter 4: Using Drives and Ports Using the memory card reader You can use memory cards to transfer pictures from a digital camera to your notebook. You can also use the memory card reader to transfer data between your notebook and a device that uses memory cards, such as a PDA, MP3 player, or cellular telephone. Memory card types The memory card reader supports Memory Stick®, Memory Stick Pro®, MultiMediaCard™, and Secure Digital™.
Adding and removing a PC Card Removing a memory card Important Do not use the remove hardware icon in the taskbar to remove the memory card. If you use the remove hardware icon, your notebook may not recognize your memory card reader until you restart your notebook. To remove a memory card: 1 Push the memory card into the notebook. The memory card pops out slightly. 2 3 Pull the memory card out of the notebook. Insert the protector into the memory card slot.
Chapter 4: Using Drives and Ports To insert a PC Card: â– Push the card firmly into the PC Card slot label-side up until the outer edge of the card is flush with the side of your notebook. To remove a PC Card: 1 Click the remove hardware name, then click Stop. icon in the taskbar, the PC Card -ORTurn off your notebook. Important 2 54 If the remove hardware icon does not appear on the taskbar, click the show hidden icons button. Release the eject button by pressing the PC Card eject button once.
Viewing the display on a projector or monitor 3 Eject the PC Card by pressing the eject button again. Viewing the display on a projector or monitor You can use your notebook for giving presentations by connecting an external monitor or projector to your monitor (VGA) port. Your notebook supports simultaneous LCD and external display. Simultaneous display lets you control the presentation from your notebook and at the same time face your audience.
Chapter 4: Using Drives and Ports 4 Plug the projector’s or monitor’s power cord into an AC power source and turn it on. Windows recognizes the new hardware and searches for its driver. You may need to install the driver from the disc supplied by the manufacturer or download the driver from the manufacturer’s Web site. 5 After the driver is installed, right-click any empty space on the desktop, then click Properties. The Display Properties dialog box opens. 6 Click the Settings tab.
Viewing the display on a television Important Press FN+F4 to switch between viewing the display on the LCD panel and viewing the display on the projector or monitor. Important If an external monitor or projector is connected and you close the LCD panel, your notebook may turn off the LCD panel, but will not enter Standby mode.
Chapter 4: Using Drives and Ports 4 5 58 Start your notebook. Click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Appearance and Themes. 6 Click/Double-click the Display icon. The Display Properties dialog box opens. 7 Click the Settings tab. 8 Click Advanced. The Multiple Monitors and ATI Mobility Radeon X700 Properties dialog box opens. www.gateway.
Viewing the display on a television 9 Click the Displays tab. Enable TV TV 10 Click the Enable TV button if it is not already enabled, then click Apply. Important If the Enable TV and TV buttons are grayed out, your notebook has not detected the television. Make sure that the television is turned on and connected correctly. www.gateway.
Chapter 4: Using Drives and Ports Modifying television settings To modify television settings: 1 On the Multiple Monitors and ATI Mobility Radeon X700 Properties dialog box Displays tab, click TV. Important 2 60 If you are traveling internationally, you may need to change the video standard. For example, many televisions in Asia use PAL instead of NTSC. Modify the settings, then click OK. www.gateway.
Connecting a video camera to your notebook Connecting a video camera to your notebook Your notebook has a 4-pin IEEE 1394 port (also known as a Firewire® or i.Link® port) for connecting devices such as a video camera. To connect your video camera to your notebook: 1 Connect one end of the IEEE 1394 cable to your video camera. For the location of the IEEE 1394 port, see “Right” on page 12.
Chapter 4: Using Drives and Ports 62 www.gateway.
Chapter 5 Managing Power • Checking and recharging the battery • Recalibrating the battery • Changing batteries • Extending the life of the battery 63
Chapter 5: Managing Power Monitoring the battery charge Your new Gateway notebook is designed to provide an exceptional balance of performance and portability. Your notebook uses the latest chipset and mobile processor technologies to manage the processor speed and power consumption for a greater battery life experience. This design provides you with maximum performance when plugged into AC power balanced with optimized battery life when on battery power. Closely monitor the battery charge.
Recharging the batteries Recharging the batteries The batteries recharge while they are installed and your notebook is connected to AC power. While the batteries recharge, the battery charge indicator turns on and the power cord icon in the taskbar has a lightning bolt . Important If the power cord or battery icon does not appear on the taskbar, click the show hidden icons button.
Chapter 5: Managing Power 6 Select Yes, then press ENTER. The battery recalibration process begins and a screen opens showing you the progress. The entire process will take several hours. Important Do not interrupt the battery recalibration process. If recalibration is interrupted, you must start the process over again. When the recalibration has finished, the message “Press [Esc] key to exit” appears. 7 Press ESC. The battery charge indicator now displays an accurate battery charge.
Changing batteries Replacing the main battery To replace the main battery: 1 Disconnect your notebook from the optional port replicator (see “Disconnecting from the port replicator” on page 90). 2 If your notebook is on and is connected directly to AC power (not using a port replicator) or has a charged secondary battery installed, go to Step 3. -ORIf your notebook is on, is not plugged into an AC outlet, and does not have a charged secondary battery installed, save your work and turn off the notebook.
Chapter 5: Managing Power 7 8 9 10 11 Slide a recharged battery into the notebook until it snaps into place. Slide the battery lock to the locked position. Turn your notebook over. Reattach the optional port replicator. Open the LCD panel and press the power button. Installing a secondary battery Your notebook’s modular bay accepts a secondary battery. The secondary battery charges when the notebook is connected to AC power. Warning Danger of explosion if battery is incorrectly replaced.
Extending battery life Extending battery life Conserving battery power To conserve power while using the battery to power your notebook: â– Dim the display as low as is comfortable. â– Remove PC Cards when you do not need them. Many PC Cards use a small amount of power while inserted, even if they are not being used. â– Modify the power management settings for maximum power savings.
Chapter 5: Managing Power Tips & Tricks For more information about traveling with your notebook, see “Traveling with your notebook” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. Using alternate power sources To extend battery life, use alternate power sources whenever possible. ■If traveling internationally, take electrical adapters. Save the battery for times when you cannot use a power adapter.
Extending battery life When in Hibernate mode, your notebook saves all memory information to the hard drive, then turns the power completely off. If your notebook is... ...and you want to... ...then On Enter Standby mode Press FN+F3. On Enter Hibernate mode (must be activated) Click Start, then click Turn Off Computer. Press and hold SHIFT, then click Hibernate. In Standby or Hibernate mode Exit Standby or Hibernate mode Press the power button. www.gateway.
Chapter 5: Managing Power 72 www.gateway.
Chapter 6 Upgrading Your Notebook • Adding and replacing memory • Replacing the hard drive 73
Chapter 6: Upgrading Your Notebook Preventing static electricity discharge Important Before installing memory or replacing the hard drive, you should read and understand the information in this section. The components inside your notebook are extremely sensitive to static electricity, also known as electrostatic discharge (ESD).
Adding or replacing memory Adding or replacing memory Your notebook uses memory modules called SO-DIMMs (Small Outline Dual Inline Memory Modules). The modules are available in various capacities and any module can be placed in the slot. Use only memory modules designed for your Gateway notebook for upgrading your memory. Memory bay To add or replace memory modules: 1 Follow the guidelines under “Preventing static electricity discharge” on page 74. 2 3 4 5 Turn off your notebook.
Chapter 6: Upgrading Your Notebook 7 Remove the main and secondary batteries (see “Changing batteries” on page 66). 8 With a small Phillips screwdriver, remove the keyboard screw and put it in a safe place. Tips & Tricks The screw hole is marked with a K. Screw 76 www.gateway.
Adding or replacing memory 9 Loosen the six memory bay cover screws (these screws cannot be removed), then remove the memory bay cover. www.gateway.
Chapter 6: Upgrading Your Notebook 78 10 If you are removing a module, gently press outward on the clip at each end of the memory module until the module tilts upward. 11 Pull the memory module out of the slot. www.gateway.
Adding or replacing memory 12 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. Important 13 14 15 16 17 18 Use only memory modules designed for your Gateway notebook. Gently push the module down until it clicks in place. Replace the memory bay cover, then tighten the cover screws.
Chapter 6: Upgrading Your Notebook Replacing the hard drive kit If you would like more hard drive capacity, you can replace your original drive with a higher-capacity drive. Hard drive To replace the hard drive kit: 80 1 Back up any data you want to transfer to the new hard drive. For more information, see “Backing up files” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation.
Replacing the hard drive kit 8 Remove the main and secondary batteries (see “Changing batteries” on page 66). 9 Remove the hard drive bay cover screws, slide the hard drive bay cover, then remove it. The hard drive is attached to the back of the cover. 10 If your new hard drive already includes the hard drive cover, go to Step 15. -ORIf you need to move the hard drive cover from your old hard drive to your new hard drive, go to Step 11. www.gateway.
Chapter 6: Upgrading Your Notebook 11 Remove the screws that secure the hard drive to the hard drive cover. Screws Screws 82 12 Remove the cover from the old drive. 13 14 15 Insert the new drive onto the cover so the screw holes line up. 16 17 Insert the batteries, then turn your notebook over. Replace the screws that secure the cover to the drive. Slide the new hard drive kit into your notebook, then replace the cover screws. Reconnect the optional port replicator. www.gateway.
Replacing the hard drive kit 18 Connect the power adapter, modem cable, and network cable, then turn on your notebook. 19 For instructions on installing Windows, your drivers, and your applications, see the instructions in the restore booklet that came with your notebook. www.gateway.
Chapter 6: Upgrading Your Notebook 84 www.gateway.
Chapter 7 Using the Optional Port Replicator • Identifying features • Connecting and disconnecting the port replicator • Securing the port replicator with a locking cable 85
Chapter 7: Using the Optional Port Replicator Front Docking release latch Power button Kensington lock ring Docking port Component Icon Description Power button Press to turn the power on or off. Docking release latch Press the release latch to release the notebook. Kensington™ lock ring Secure your port replicator and notebook to an object by running a Kensington cable through this ring and locking it to the slot on the notebook.
Back Back Headphone jack S-Video out jack IEEE 1394 port USB ports Modem jack Parallel Monitor port port Ethernet jack Component Icon Serial Line in jack Power port USB ports connector Description S-Video out jack Plug a standard S-Video device, such as a television, into this jack. For more information, see “Viewing the display on a television” on page 57. IEEE 1394 port Plug an IEEE 1394 (also known as Firewire® or i.Link®) device (such as a digital camcorder) into this 4-pin IEEE 1394 port.
Chapter 7: Using the Optional Port Replicator Component Icon Description Monitor port Plug an analog VGA monitor or projector into this port. Parallel port Plug a parallel device (such as a printer) into this port. Serial port Plug a serial device (such as a digital camera) into this port. Line in jack Plug an external audio input source (such as a stereo) to this jack so you can record sound on your notebook or play sound through the notebook speakers.
Connecting to the port replicator 2 Rest the front edge of the notebook on your desktop, then align the mark on the left hinge cover with the corresponding mark on the port replicator. 3 Press down on the notebook until it snaps into place. Caution Press down on the outside edges of the notebook. Do not press in the middle or you may damage the LCD screen. Important The notebook may detect additional devices and add drivers after being attached to the port replicator.
Chapter 7: Using the Optional Port Replicator Disconnecting from the port replicator You can separate your notebook from the port replicator while your notebook is off or on (not in Standby or Hibernate mode). To separate your notebook from the port replicator: 1 If your notebook is off, go to Step 2. -ORIf your notebook is on, click Start, then click Undock Computer. The Undock Computer menu item appears in the Start menu only while the notebook is docked.
Securing your port replicator Securing your port replicator You can secure your notebook and port replicator to an object by using the security ring located on the left side of the port replicator and the Kensington lock slot located on the left side of your notebook. To secure your notebook and port replicator: 1 2 3 Open the security ring on the port replicator. Attach your notebook to the port replicator.
Chapter 7: Using the Optional Port Replicator 92 www.gateway.
Chapter 8 Maintaining Your Notebook • Caring for your notebook • Cleaning your notebook • Protecting your notebook from viruses • Updating Windows • Restoring your system 93
Chapter 8: Maintaining Your Notebook Caring for your notebook To extend the life of your notebook: â– Be careful not to bump or drop your notebook, and do not put any objects on top of it. The case, although strong, is not made to support extra weight. â– When transporting your notebook, we recommend that you put it in a carrying case. â– Keep your notebook away from magnetic fields. Magnetic fields can erase data on hard drives.
Cleaning your notebook Cleaning your notebook Keeping your notebook clean and the vents free from dust helps keep your notebook performing at its best.
Chapter 8: Maintaining Your Notebook Cleaning the keyboard You should clean the keyboard occasionally by using an aerosol can of air with a narrow, straw-like extension to remove dust and lint trapped under the keys. If you spill liquid on the keyboard, turn off your notebook and turn the notebook upside down. Let the liquid drain, then let the keyboard dry before trying to use it again. If the keyboard does not work after it dries, you may need to replace it.
Protecting your notebook from viruses Protecting your notebook from viruses A virus is a program that attaches itself to a file on a computer, then spreads from one computer to another. Viruses can damage data or cause your notebook to malfunction. Some viruses go undetected for a period of time because they are activated on a certain date. Protect your notebook from a virus by: ■Registering your copy of Norton® Internet Security and subscribing to the virus definition update service.
Chapter 8: Maintaining Your Notebook To scan for viruses: 98 1 Click Start, All Programs, Norton Internet Security, then click Norton Internet Security. Norton Internet Security opens. 2 Click Norton AntiVirus. www.gateway.
Protecting your notebook from viruses 3 Click Scan for Viruses. 4 Click the type of scan you want to make in the Scan for Viruses area. To remove a virus: 1 If Norton Internet Security finds a virus, follow all on-screen instructions to remove the virus. 2 3 Turn off your notebook and leave it off for at least 30 seconds. Turn on your notebook and rescan for the virus.
Chapter 8: Maintaining Your Notebook 3 4 Click LiveUpdate. The LiveUpdate wizard opens. 5 When the program has finished, click Finish. Follow the on-screen instructions to update your Norton Internet Security program with the latest virus protection files. Updating Windows Windows Update is the online extension of Windows that helps you keep your notebook up-to-date. Use Windows Update to choose updates for your notebook’s operating system, software, and hardware.
Restoring your system Restoring your system Microsoft System Restore If your notebook is not working correctly after you install a program or change a setting in the Control Panel, you may need to use Microsoft System Restore to restore the notebook to an earlier configuration. To run Microsoft System Restore: 1 Click Start, All Programs, Accessories, System Tools, then click System Restore. 2 Follow the on-screen instructions.
Chapter 8: Maintaining Your Notebook Restoring your notebook to the original configuration If Windows does not start or if the two previous procedures do not correct the problem, you may need to restore your notebook to the original configuration. To restore your notebook to the original configuration: 1 2 102 Turn on your notebook, then press F11. Follow the on-screen instructions. www.gateway.
Chapter 9 Troubleshooting • Troubleshooting typical hardware and software problems • Getting telephone support • Using automated troubleshooting systems 103
Chapter 9: Troubleshooting Safety guidelines While troubleshooting your notebook, follow these safety guidelines: â– Never remove the memory bay or hard drive bay cover while your notebook is turned on, while the batteries are installed, and while the modem cable, network cable, and AC power adapter are connected to your notebook. â– Make sure that you are correctly grounded before accessing internal components.
First steps First steps If you have problems with your notebook, try these things first: â– Make sure that the AC power adapter is connected to your notebook and an AC outlet and that the AC outlet is supplying power. â– If you use a power strip or surge protector, make sure that it is turned on. â– If a peripheral device (such as a keyboard or mouse) does not work, make sure that all connections are secure. â– Make sure that your hard drive is not full.
Chapter 9: Troubleshooting Troubleshooting Audio Audio troubleshooting is covered under “Sound” on page 125. Battery Battery troubleshooting is covered under “Power” on page 122. CD drives CD drive troubleshooting is covered under “DVD drives” on page 109. Device installation You have computer problems after adding a new device Sometimes a new device, such as a PC Card, can cause a system resource (IRQ) conflict. Check IRQ usage to determine if there is an IRQ conflict.
Troubleshooting Help and Support For more information about IRQs, click Start, then click Help and Support. Type the keyword IRQs in the Search box , then click the arrow. To free IRQ resources for the new device: 1 In the Device Manager window, check the device list for a resource conflict. A resource conflict appears as a black exclamation point in a yellow circle. 2 Remove the device you are trying to install, then determine which one of the existing devices or ports you can disable.
Chapter 9: Troubleshooting You see a “Disk is full” error message ■Delete unnecessary files on the diskette. ■Try a different diskette. Occasionally diskettes are flawed and cannot be read by the diskette drive. ■Run Error checking on the diskette. If errors are detected and corrected, try using the diskette again. Tips & Tricks For instructions on running Error checking, see “Checking the hard drive for errors” in Using Your Computer which has been included on your hard drive.
Troubleshooting The text on the display is dim or difficult to read ■Adjust the brightness and contrast using the system keys. For more information, see “System key combinations” on page 33. ■Change the display settings. Tips & Tricks ■For instructions on changing the display settings, see “Adjusting the screen and desktop settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation.
Chapter 9: Troubleshooting ■Make sure that the disc label is facing up, then try again. ■If you are trying to play a DVD, make sure that you have a DVD drive. See “Identifying drive types” on page 49 for more information. ■Try a different disc. Occasionally discs are flawed and cannot be read by the drive. ■Some music CDs have copy protection software. You may not be able to play these CDs on your notebook. ■Your notebook may be experiencing some temporary memory problems.
Troubleshooting ■Reinstall the audio device drivers. For more information, see “Downloads” on page 4. A DVD movie will not play ■Make sure that the label or side you want to play is facing up, then try again. ■Make sure that you have a DVD drive. See “Identifying drive types” on page 49 for more information. ■The DVD drive may not be inserted completely into the modular bay. Press the module into the bay, then try to access the disc again. ■Shut down and restart your notebook.
Chapter 9: Troubleshooting You cannot eject a CD or DVD Your notebook must be turned on to remove CDs and DVDs. If you do not want to turn on your notebook, manually eject the disc by inserting an opened paper clip into the manual eject hole. See “Inserting a CD or DVD” on page 50 for the location of the manual eject hole. File management A file was accidentally deleted If a file was deleted while holding down the SHIFT key, the file cannot be restored.
Troubleshooting â– Empty the Recycle Bin by right-clicking the Recycle Bin icon, then clicking Empty Recycle Bin. Caution â– All deleted files will be lost when you empty the Recycle Bin. Save your files to another drive. If the hard drive is full, copy any files not regularly used to backup media, then delete them from the hard drive. Help and Support For more information about file management, click Start, then click Help and Support.
Chapter 9: Troubleshooting The secondary hard drive is not recognized ■The modular drive may not be inserted completely into the drive bay. Press the drive into the bay, then try to access the drive again. Internet You cannot connect to the Internet ■If you are using a dial-up modem, make sure that the modem cable is plugged into the modem jack and not the Ethernet network jack. See “Right” on page 12 and “Back” on page 87 to make sure that the connections have been made correctly.
Troubleshooting Connecting to a Web site takes too long Many factors can affect Internet performance: â– The condition of the telephone lines in your residence or at your local telephone service â– The condition of the Internet computers to which you connect and the number of users accessing those computers â– The complexity of graphics and multimedia on Web pages â– Having multiple Web browsers open, performing multiple downloads, and having multiple programs open on your notebook People are sending y
Chapter 9: Troubleshooting You are pressing a letter key and a number appears on the screen ■The numeric keypad is turned on. See “Key types” on page 32 for instructions on turning off your numeric keypad. Memory You see a “Memory error” message ■Make sure that the memory module is inserted correctly in the memory bay slot. For more information, see “Adding or replacing memory” on page 75. ■Use a third-party diagnostic program to help determine if a memory module is failing.
Troubleshooting Modem (dial-up) Your modem does not dial or does not connect ■Make sure that the modem cable is plugged into the modem jack and not the Ethernet network jack. See “Right” on page 12 to make sure that the connections have been made correctly. ■Make sure that your notebook is connected to the telephone line and the telephone line has a dial tone. ■Make sure that the modem cable is less than 6 feet (1.8 meters) long.
Chapter 9: Troubleshooting â– Disconnect any answering machine, fax machine, or printer that is on the same line as the modem. Do not connect these devices to the same telephone line as the modem. â– Make sure that you are not using a digital, rollover, or PBX line. These lines do not work with your modem. â– Check for line noise (scratchy, crackling, or popping sounds). Line noise is a common problem that can cause the modem to connect at a slower rate, abort downloads, or even disconnect.
Troubleshooting If your notebook has a v.90 modem, the speed at which you can upload (send) data is limited to 33.6K. If your notebook has a v.92 modem, the speed at which you can upload data is limited to 48K. Your ISP may not support 48K uploads. Your fax communications program only sends and receives faxes at 14,400 bps when you have a 56K modem Current fax technology only supports a maximum send and receive rate of 14,400 bps.
Chapter 9: Troubleshooting 5 Click the Diagnostic tab, then click Query Modem. If information about the modem appears, the modem passed diagnostics. If no modem information is available, a white screen appears with no data, or if you get an error such as port already open or the modem has failed to respond, the modem did not pass diagnostics. Help and Support For more information about modem troubleshooting, click Start, then click Help and Support.
Troubleshooting The external mouse does not work ■Make sure that the mouse cable is plugged in correctly. ■Shut down and restart your notebook. ■Remove all extension cables and switch boxes. ■Try a mouse you know is working to make sure that the mouse port works. The external mouse works erratically ■Clean the mouse. ■Some mouse pad patterns “confuse” optical mice. Try the mouse on a different surface. Networks You cannot connect to your company network Every network is unique.
Chapter 9: Troubleshooting Passwords Your notebook does not accept your password Make sure that CAPS password. LOCK and NUM LOCK are turned off, then retype the You forgot your startup password The password feature (which is set in the BIOS Setup utility) is very secure, with no easy way to recover a forgotten password. You must return your notebook for repair. Call Gateway Customer Care for instructions.
Troubleshooting Your notebook is not working on battery power ■Check the power management settings. Tips & Tricks For more information about using power management settings, see “Changing Power-Saving Settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. ■Make sure that the batteries are installed correctly. For more information, see “Installing the battery” on page 22.
Chapter 9: Troubleshooting To set a default printer: â– 1 Click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Printers and Other Hardware. 2 Click/Double-click the Printers and Faxes icon. The Printers and Faxes window opens. 3 Right-click the name of the printer you want to be the default printer, then click Set as Default Printer. Reinstall the printer driver.
Troubleshooting ■If you print large files or many files at one time, you may want to add additional memory to the printer. See the printer documentation for instructions for adding additional memory. You see a “Printer is out of paper” error message After adding paper, make sure that the printer is online. Most printers have an online/offline button that you need to press after adding paper.
Chapter 9: Troubleshooting The notebook is not responding when you click or tap on the touchpad ■Turn on the touchpad. Tips & Tricks For instructions on how to adjust the touchpad settings, see “Changing the mouse or touchpad settings” in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. The pointer moves unexpectedly ■Clean the touchpad with a damp cloth (water only) and wipe it dry.
Telephone support Telephone support Before calling Gateway Customer Care If you have a technical problem with your notebook, follow these recommendations before contacting Gateway Customer Care: â– Make sure that your notebook is connected correctly to a grounded AC outlet that is supplying power. If you use a surge protector, make sure that it is turned on. â– If a peripheral device, such as a keyboard or mouse, does not appear to work, make sure that all cables are plugged in securely.
Chapter 9: Troubleshooting Telephone numbers Gateway offers a wide range of customer service, customer care, and information services. Automated troubleshooting system Service description How to reach Use an automated menu system and your telephone keypad to find answers to common problems.
Telephone support Self-help If you have how-to questions about using your Gateway-supplied hardware or software, see the following resources: â– The printed or online documentation that came with your hardware or software. In many cases, additional product information and online documentation for Gateway-supplied hardware can be found in our Web site's Documentation Library. â– This user guide and the Using Your Computer guide. â– The software publisher's Web site.
Chapter 9: Troubleshooting 130 www.gateway.
Appendix A Safety, Regulatory, and Legal Information • Safety information • Regulatory statements • Environmental information • Notices 131
Appendix A: Safety, Regulatory, and Legal Information Important safety information Your Gateway notebook is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this notebook, it is important that the safety instructions marked on the notebook and in the documentation are followed. Warning Always follow these instructions to help guard against personal injury and damage to your Gateway notebook.
Regulatory compliance statements â– Unplug the notebook from the wall outlet and refer servicing to qualified personnel if: â– The power cord or plug is damaged. â– Liquid has been spilled into the notebook. â– The notebook does not operate properly when the operating instructions are followed. â– The notebook was dropped or the cabinet is damaged. â– The notebook performance changes. Replacement parts and accessories Use only replacement parts and accessories recommended by Gateway.
Appendix A: Safety, Regulatory, and Legal Information Measurements have been performed to show that the RF exposure is below what is considered safe limits; however care should be taken to make sure the user or bystanders keep the transmitter away from their body when the wireless device is transmitting. The transmitting antenna installed in the top third of the lid should be used in a manner to maintain 20 cm (8 inches) from user’s or bystander’s bodies.
Regulatory compliance statements Important Every country has different restrictions on the use of wireless devices. Since your notebook is equipped with a wireless device, when traveling between countries with your notebook, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country.
Appendix A: Safety, Regulatory, and Legal Information Unintentional emitter per FCC Part 15 This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory compliance statements Mercury Warning Warning Hg The lamp in this display contains mercury. Do not put in trash. Recycle or dispose as hazardous waste. Telecommunications per Part 68 of the Code of Federal Regulations (CFR 47) (applicable to products fitted with USA modems) Your modem complies with Part 68 of the Code of Federal Regulations (CFR 47) rules. On the computer or modem card is a label that contains the FCC registration number and Ringer Equivalence Number (REN) for this device.
Appendix A: Safety, Regulatory, and Legal Information Canada Industry Canada (IC) Intentional emitter per RSS 210 Low power, Radio transmitter type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz band and/or 5.15 – 5.35 GHz band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Regulatory compliance statements Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada. Telecommunications per Industry Canada CS-03 (for products fitted with an IC-compliant modem) The Industry Canada label identifies certified equipment.
Appendix A: Safety, Regulatory, and Legal Information Japanese Modem Notice Laser safety statement All Gateway systems equipped with CD and DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact an authorized service location.
Environmental information Environmental information The product you have purchased contains extracted natural resources that have been used in the manufacturing process. This product may contain substances known to be hazardous to the environment or to human health.
Appendix A: Safety, Regulatory, and Legal Information Notices Copyright © 2005 Gateway, Inc. All Rights Reserved 7565 Irvine Center Drive Irvine, CA 92618 USA All Rights Reserved This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any form, without prior consent in writing from Gateway. The information in this manual has been carefully checked and is believed to be accurate. However, changes are made periodically.
Index A AC adapter connecting 22 connector 13, 88 international adapters 70 accessories purchasing 18 safety precautions 133 application key 32 arrow keys 32 audio adjusting volume 34 back button 34 headphone jack 10, 87 microphone jack 10 muting 34, 42 next button 34 pause button 33 play button 33 stop button 33 troubleshooting 125 volume down button 34 volume up button 34 audio CD cleaning 96 playing 51 troubleshooting 106 automobile power adapter 70 B battery alternate power sources 70 bay 67 changing 6
PC Card slot 12 removing memory card 52 removing PC Card 53 slots 52, 53 troubleshooting memory card 116 troubleshooting PC Card 122 types of memory cards supported 52 carrying case 18 CD cleaning 96 creating 51 inserting 50 playing audio 51 troubleshooting 106 cellular phone memory cards 52 Certificate of Authenticity 17 changing bay modules 46 cleaning audio CD 96 case 95 CD 96 computer exterior 95 computer screen 96 DVD 96 keyboard 96 LCD panel 96 screen 96 clicking 36, 38 closing unresponsive program
video camera 12, 87 copyright notice 142 customer service sales 128 CyberLink PowerDVD 51 D default printer 123 digital camera serial port 88 USB port 12, 87 digital video camera connecting 61 IEEE 1394 port 12, 87 directional keys 32 diskette troubleshooting 107 diskette drive locating 11 replacing drive module 46 status indicator 30 troubleshooting 107 display properties 56 switching 33 troubleshooting 108 docking port 14, 86 docking release latch 86 documentation Gateway Web site 3 help 5 Help and Suppo
Hibernate mode 70 hot-swapping 53 See touchpad F fan 11 faxes troubleshooting 119 files opening 36, 38 troubleshooting 112 finding Help and Support topics 6 specifications 18 Firewire port 12, 87 Fn key 32, 33 folders opening 36, 38 function keys 32 G Gateway model number 14, 17 serial number 17, 18 Support 18 Web address 3 Web site 3 I i.
locating 16 troubleshooting 115 USB port 12, 87 keys application 32 arrow 32 brightness 34 directional 32 Fn 32, 33 function 32 LCD brightness 34 LCD/CRT 33 navigation 32 numeric keypad 32 Pad Lock 34 Standby 33 system 32 system key combinations 33 toggle display 33 Windows 32 wireless network 33 L labels 14, 17 laser printer 19 latch battery 14, 15 docking release 86 LCD panel release 10 modular bay 14 LCD panel cleaning 96 release latch 10 switching display 33 troubleshooting 108 LCD/CRT system key 33 li
pointer 36 screen objects 37 MP3 player memory cards 52 multimedia adjusting volume 42 playing DVD 51 using DVD drive 49 using Windows Media Player 51 muting sound 34, 42 N navigation keys 32 network jack 13, 26, 87 troubleshooting 121 networking turning off wireless network 43 turning on wireless network 43 Norton Internet Security 97 NTSC/PAL jack 57 Num Lock status indicator 30, 34 system key 34 numeric keypad status indicator 30 using 32 O online help 5, 7 opening files 36, 38 folders 36, 38 LCD panel
EmPower adapter 70 extending battery life 69 Hibernate mode 70 indicator 10, 28 management 63, 69 source problems 24 Standby mode 28, 33, 70 status indicator 10 troubleshooting 122 turning off notebook 28 turning on notebook 27 printer default 123 inkjet 19 laser 19 parallel port 88 troubleshooting 123 USB port 12, 87 programs closing unresponsive 29 opening 36, 38 projector adding 55 color quality 56 display properties 56 screen resolution 56 R RAM See memory rebooting notebook 29 recalibrating battery 65
Standby mode 28, 33, 70 system key 33 starting notebook 27 programs 36, 38 static electricity 74 status indicators battery charge 10, 64 Caps Lock 30 CD drive 30 diskette drive 30 drive activity 30 DVD drive 30 DVD/CD-RW drive 30 hard drive 30 location 16 memory card reader 30 modular drive 30 Num Lock 34 numeric keypad 30, 34 Pad Lock 30 power 10 recordable DVD drive 30 Support getting specifications 18 using 3 surge protector 24 Suspend 33 S-Video (TV) out jack 11, 57, 87 system identification label 14, 1
LCD panel 108 memory 116 memory card reader 116 modem 116, 117 mouse 120 network 121 passwords 122 PC Cards 122 power 122 printer 123 safety guidelines 104 screen 108, 126 screen area 108 screen resolution 108 sound 125 technical support 127 telephone support 127 touchpad 125 video 126 Web site connection speed 115 turning off notebook 28, 29 wireless network 33, 43 turning on notebook 27 wireless network 33, 43 tutoring fee-based 129 TV out (S-Video out) jack 11, 87 U undocking 90 updating device drivers
152 www.gateway.
MAN M460 MYSTQ USR GDE R2 6/05
