Gateway Port Replicator User Guide
Front Front Docking release latch Power button Kensington lock ring Docking port Component Icon Description Power button Press to turn the power on or off. Docking release latch Press to release the notebook. Kensington™ lock ring Secure your port replicator and notebook to an object by running a Kensington cable through this ring and locking it to the slot on the notebook. For more information, see “Securing your port replicator” on page 5. Docking port Connect the notebook to this port.
Back Headphone jack S-Video out jack IEEE 1394 port USB ports Modem jack Parallel Monitor port port Ethernet jack Component 2 Icon Serial Microphone Power port USB ports jack connector Description S-Video out jack Plug a standard S-Video device into this jack. IEEE 1394 port Plug an IEEE 1394 (also known as Firewire® or i.Link®) device (such as a digital camcorder) into this 4-pin IEEE 1394 port. Headphone jack Plug amplified speakers or headphones into this jack.
Connecting to the port replicator Component Icon Description Microphone jack Plug a microphone into this jack. Power connector Plug the AC adapter cable into this connector. Connecting to the port replicator You can attach your notebook to the port replicator while your notebook is off, on, or in Standby mode. Attaching to the port replicator To attach your notebook to the port replicator: 1 2 Connect external devices to the ports on the port replicator.
Important The notebook may detect additional devices and add drivers after being attached to the port replicator. This process must be completed for components to work correctly. Follow any on-screen instructions, if necessary. Disconnecting from the port replicator You can separate your notebook from the port replicator while your notebook is off or on (not in Standby or Hibernate mode). To separate your notebook from the port replicator: 1 If your notebook is off, go to Step 2.
Securing your port replicator Securing your port replicator You can secure your notebook and port replicator to an object by using the security ring located on the left side of the port replicator and the Kensington lock slot located on the left side of your notebook. To secure your notebook and port replicator: 1 2 3 Open the security ring on the port replicator. Attach your notebook to the port replicator.
MAN M460/M680 PORT REP GDE R1 2/05
