User Guide

CHAPTER 3: Replacing notebook components
138
12 Remove the modem jack/USB board screw.
13 Lift the old modem jack/USB board from the notebook.
14 Set the new modem jack/USB board module into the notebook, then replace the
screw removed in Step 12.
15 Replace the system board by following the steps in “Replacing the system board
and VGA cooling assembly” on page 128.
16 Replace the palm rest by following the steps in “Replacing the palm rest” on
page 104.
17 Replace the speaker by following the steps in “Replacing the speakers” on page 125.
18 Replace the LCD assembly by following the steps in “Replacing the LCD assembly”
on page 91.
19 Replace the keyboard by following the steps in “Replacing the keyboard” on
page 79.
20 Replace the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 76.
21 Replace the DVD drive by following the steps in “Replacing the DVD drive” on
page 73.
22 Replace the hard drive by following the instructions in “Replacing the hard drive”
on page 69.
23 If the notebook has wireless networking built in, reconnect the wireless antennas
by following the steps in “Replacing the IEEE 802.11 wireless card” on page 63.
24 Replace the cooling assembly by following the instructions in “Replacing the main
cooling assembly” on page 58.
Screw