User Guide

CHAPTER 3: Replacing notebook components
80
4 Lift the back edge of the keyboard slightly, then slowly slide it toward the LCD panel
to release the keyboard retaining tabs located on the front edge of the keyboard.
5 Slide the keyboard connector clip to the back of the notebook or lift the connector
clip off of the cable, then slide the cable out of the clip. Be careful not to touch or
damage any other components.
6 Place the new keyboard keys-up on your notebook with the space bar toward you.
7 Make sure the keyboard connector clip is fully moved toward the back of the
notebook or lifted into the raised position, insert the cable into the connector, then
slide the clip forward or downward to lock the connector in place.
8 Insert the tabs on the front edge of the keyboard into the slots under the palm rest.
You may need to press down on the keyboard keys along the front edge of the
keyboard to seat the retaining tabs into their corresponding slots.
9 Gently press the keyboard down until it is flat all the way across. The keyboard
should easily fall into place. Be careful to not damage the LCD panel.
10 Replace the screws removed in Step 3.
Important
The keyboard cable is correctly oriented if it is not twisted.
Clip