User Guide

9
Replacing the back panel
www.gateway.com
3 With your hands positioned on each side of the case, swing the back panel
up and away from the case and set the panel aside.
4 Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
5 Hook the new back panel’s tabs into the notches on the top of the open
computer’s back, then swing the back panel down and press it into place.
The cover should easily press back into place. If it does not, make sure that
the tabs are aligned with the notches on the computer’s back and try again.
6 Replace the four screws you removed previously.