User Guide

12
Replacing Components in Your Gateway Profile 5
www.gateway.com
5 Unplug the intrusion switch cable and other cables that connect the I/O
panel to the computer.
If your computer has a VGA out port on the I/O panel, to disconnect the
VGA out cable you must remove the blower assembly. For more
information, see “Replacing the blower assembly” on page 14.
If your computer has a modem port, unplug the internal modem cable
from the system board.
6 Plug the cables you have unplugged into the new I/O panel. If your
computer has a VGA out port on the I/O panel, plug the VGA out cable
into the system board.
7 If you removed the blower assembly in Step 5, reinstall it by following the
instructions in “Replacing the blower assembly” on page 14.
Intrusion
switch cable