User Guide

25
Replacing drives
www.gateway.com
7 Remove the drive.
8 Make sure that the jumpers on the new drive are set the same as the drive
you are replacing.
9 Insert the new drive into the drive cage and secure it with the four screws
removed earlier.
10 Connect the drive cable and power cable to the drive.
11 Slide the drive cage into the computer until it clicks into place. Make sure
that the drive cage’s rails engage the rail guides in the top of the hard drive
cage bay.
12 Reinstall the back panel by following the instructions in “Replacing the
back panel” on page 8.