User Guide

33
Replacing the video board
www.gateway.com
Replacing the video board
Time to complete: 5.5 minutes
Depending on your configuration, your computer may not have a video board
installed.
To replace the video board:
1 Turn off the computer and prepare it by following the instructions in
“Preparing your computer” on page 4.
2 Remove the back panel by following the instructions in “Replacing the
back panel” on page 8.
3 Remove the blower assembly by following the instructions in “Replacing
the blower assembly” on page 14.
4 Remove the two screws that secure the video board to the computer.
5 Pry under the lower-right corner of the board to pull it loose, then pull
the entire video board away from the computer.
Screw
Screw