User Guide

34
Replacing Components in Your Gateway Profile 5
www.gateway.com
6 Carefully line up the new video board’s screw holes with the mounting
posts on the system board, then press the video board into place.
7 Secure the video board to the system board with the two screws you
removed previously.
8 Reinstall the blower assembly by following the instructions in “Replacing
the blower assembly” on page 14.
9 Reinstall the back panel by following the instructions in “Replacing the
back panel” on page 8.
Warning Make sure the Mini PCI card’s antenna cables do not block
the video board connector.