User’s Guide ® Gateway desktop series - 1
T A B L E O F C ON TE N TS Starting your computer Registration....................................................... Software installation ........................................ Recovery ............................................................ Having trouble? ................................................ 4 Upgrading your computer 4 Expanding through options .......................... 5 Connectivity options............................... 5 Software 5 Using Windows and your software...............
Regulatory information 78 Environment 88 Software license 90 Index 93 Copyright © 2011. All Rights Reserved. Gateway desktop series user’s guide Original Issue: 10 February 2011 Visit registration.gateway.com and discover the benefits of being a customer of Gateway. Remark: All images are for reference purposes only. Actual configuration may vary.
S T A R T I N G YOUR C OMPUTER Thank you for purchasing this Gateway computer! This guide has been designed to introduce you to the features of your computer and assist in your computing experience. After setting up and starting your computer, as shown in the setup instructions, it will ask you questions that will help you connect to the Internet. Your computer will then configure installed software. REGISTRATION When using your computer for the first time, it is recommended that you register it.
Another option Another way to register your Gateway product is to visit our website at registration.gateway.com. Choose your country and follow the simple instructions. After registering, you will be sent a confirmation email with important information that you should keep in a safe place. SOFTWARE INSTALLATION Your computer will automatically install software and prepare your computer for use. This may take some time, please do not turn off your computer; wait until the installation has finished.
save your proof of purchase. Before you call us, please write down any error message that accompanies the problem, and have the computer in front of you and switched on if possible. Having these items to hand when contacting us will ensure better and quicker service. Gateway website Remember to visit www.gateway.com - Check out the support section for up-to-date information, help, drivers and downloads.
C OM P U T E R B A S I C S SAFETY AND COMFORT Safety precautions Please follow the guidelines below to use your computer comfortably and to avoid health problems. Computer environment Make sure that the computer: • Is used on a stable surface, stand or table. A fall can seriously damage the computer. • Is not used on a surface that vibrates, or used when taking part in sport, exercise or other activities in a dynamic environment.
• Is not placed on a carpet or any other surface that may have an electrical charge. Cables Make sure that: • Cables are not strained and that there is no risk of people walking or tripping over them. • Other devices do not crush the cables. • The power cable is connected to the computer before connecting the power cable to the AC power outlet. • The power cable is unplugged from the power outlet before disconnecting the power cable from the computer.
Cleaning your computer • Always unplug your computer from the power outlet before cleaning it. • Do not use liquid or aerosol cleaners, use a damp cloth instead. • Never spray cleaning product directly on the screen. • If dust has accumulated inside your computer, do not use a vacuum cleaner to remove it. • If you spill liquid on your computer or any device attached to it, switch it off immediately, unplug the power cord and make sure it is completely dry before switching it on again.
• the product was exposed to rain or water, • the product has been dropped or the case has been damaged • the product exhibits a distinct change in performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to n
• Ensure that the computer’s ventilation slots and openings are never obstructed or covered. Do not place the computer on a soft surface (such as a carpet, chair or bed) that may block ventilation slots. • Do not push objects of any kind into ventilation or case slots as they may touch dangerous voltage points or short-out parts that may result in a fire or electric shock.
S E T T I N G U P YOUR C OMPUTER ARRANGING A COMFORTABLE WORK AREA Working safely and comfortably begins with the arrangement of your work space and the proper use of equipment. For this reason, it is very important to take time and think about how you are going to arrange your work area. Refer to the diagram on the following page as you set up your system. Here are some points to consider: Adjusting your chair Having the right kind of chair does not necessarily mean you'll be properly supported.
Positioning your PC Take note of the following when selecting a location for your computer: • Do not put your computer near any equipment that might cause electromagnetic or radio frequency interference, such as radio transmitters, televisions, copy machines or heating and airconditioning equipment. • Avoid dusty areas and extremes of temperature and humidity. • You may place your computer beside your desk or under your table, as long as it does not block the space you need for working and moving.
Positioning your monitor Place your monitor at a comfortable viewing distance, usually 50 to 60 cm away. Adjust the display in such a way that the top of the screen is at or slightly below eye level. Positioning your keyboard The location of the keyboard is a very important factor for your posture. Placing it too far away will make your body lean forward, forcing you to sit in an unnatural position. Placing it too high will add tension to your shoulder muscles.
• Adjust its position to allow enough space for movement without making you stretch or lean over. • Use your arm to move the mouse. Do not rest your wrist on the table when moving the mouse.
U SING YOUR C O M P U T E R CONNECTING THE COMPUTER Setting up your computer is easy. For the most part, you only have four things to connect: the mouse, the keyboard, the monitor, and the power cable. Note: The peripherals shown in the connections below are for your reference only. Actual device models may vary. Please follow the instructions provided on the setup guide.
Connect a monitor To connect a monitor, simply plug the monitor cable into the appropriate port located on the rear panel of your computer. Note: The type of connection can vary. Use a cable that matches both your monitor and your computer. Refer to the monitor manual for additional instructions and information.
TURNING ON YOUR COMPUTER After making sure that you have properly set up the system, applied power, and connected all the necessary peripherals, you can now power on the system. Important: Make sure that the power cable is properly plugged into an electrical outlet. If you are using a power strip or an AVR (Auto-Voltage Regulator), make sure that it is plugged in and turned on. TURNING OFF YOUR COMPUTER 1. On the Windows taskbar, click on the Start button, then click Shut Down. 2.
Optical discs are compact, lightweight and easy to carry around. However, they are delicate and must be handled with care. To insert a disc into your computer's optical drive: 1. Press the optical drive’s eject button. 2. When the disc tray slides open, place the disc gently on the tray. Make sure that the label or title side of the disc is facing upward. When holding a disc, hold it by the edges to avoid leaving smudges or fingerprints. 3.
U P G R A D I N G YOUR COMPUTER EXPANDING THROUGH OPTIONS Your computer offers you many options for a complete computing experience. Connectivity options Ports allow you to connect peripheral devices to your computer. For instructions on how to connect different external devices to the computer, read the following section. Memory card reader Memory cards are used in a wide selection of digital cameras, PDAs, MP3 players and mobile phones. Inserting a memory card 1.
If the card contains some files, the Windows Auto Play window may appear (this depends on the contents of the card) and ask you if you wish to use a program to access the contents of the card. Select an option here if it is appropriate, otherwise select Cancel. If the card contains no files, or unknown files, a window will open showing the contents of the card. Removing a card from an memory card reader 1. Click on the Safely Remove Hardware icon in the Notification Area (next to the clock). 2.
Universal Serial Bus (USB) The USB port is a high-speed serial bus which allows you to connect USB peripherals without taking up system resources. Certain computers may include one or more USB 3.0 ports. These resemble standard USB ports, except they include additional internal connections and are blue. You may use USB 3.0 compatible devices with these ports to benefit from faster transfer speeds.
Follow these steps to connect an monitor to your computer: 1. Check that the computer is powered off and the monitor power switch is turned off. 2. Attach the video cable to the monitor port on the computer. Secure the cable connection with the screws provided. 3. Connect the monitor power cable and plug it into a properly grounded wall outlet. 4. Follow any setup instructions in the monitor's user's guide. 5. Turn on power to the monitor, then the computer. 6.
High-Definition Multimedia Interface (only for certain models) HDMI (High-Definition Multimedia Interface) is an industry-supported, uncompressed, all-digital audio/ video interface. HDMI provides an interface between any compatible digital audio/video source, such as a set-top box, DVD player, and A/V receiver and a compatible digital audio and/or video monitor, such as a digital television (DTV), over a single cable. Use the HDMI port on your computer to connect with high-end audio and video equipment.
SOFTWARE USING WINDOWS AND YOUR SOFTWARE Gateway computers include software to help you use your computer; the programs and categories available on your computer depend on the model purchased. Most of this software is ’pre-installed’ and ready to be used; however some software may be provided on a CD or DVD and must first be installed if you wish to use it. To do so, insert the installation CD or DVD.
from the most recent online threats and protects your personal data (bank account credentials, credit card numbers, passwords, and more). Productivity software Work Great with Microsoft® Office 2010 - Express your ideas, solve problems and simplify everyday projects with Office 2010. Photo editing - Easily edit and print your photos with Windows Live Photo Gallery. Then share them on Facebook, YouTube™ or Windows Live.
Windows Media Player Windows Media Player may be used to play MP3 or WMA audio files, CDs or most video files. Note: It is not recommended that you use Windows Media Player to play DVD movies. Other media players (such as Windows Media Center) provide additional playback options. Windows Media Center (optional) Certain computers include allin-one media ‘centers’ such as Windows Media Center.
Setup Caution: If your computer includes a remote control or TV tuner they must be connected and active before starting the media program for the first time. The first time you start the media program, it will start a setup wizard, which will configure some basic settings. If available, select the Express setup option, you may then configure additional options as needed. Note: If you have an Internet connection, the Guide (Electronic Program Guide) allows you to view a list of current TV shows.
AutoPlay The Windows AutoPlay function allows you to choose the way Windows handles media files on devices with removable storage (digital camera, CD, DVD, etc). If you have inserted a disk that contains files (such as a DVD, USB key or memory card), Windows will display a dialog box and ask you to choose how you want to open the files. For example, if you have inserted an audio CD or a DVD movie, Windows will automatically display a dialog box and ask you to choose how you want to play it.
Codecs A codec is software that is used to compress or decompress a digital media file, such as a song or video. Windows Media Player and other programs use codecs to play and create digital media files. For example, when you rip a song from an audio CD to your computer, the player uses the Windows Media Audio codec to compress the song into a compact WMA file.
Once your DVD drive is set to a region code, it will play DVD discs of that region only. You can set the region code a maximum of five times (including the first time), after which the last region code set will remain permanent. Recovering your hard disk does not reset the number of times the region code has been set. 2. The DVD movie will automatically play after a few seconds.
INTERNET FIRST STEPS ON THE NET Protecting your computer It is vital to protect your computer from viruses and attacks over the Internet (see Internet security offer on page 25 and Security on page 40). A comprehensive Internet security program is offered when you first start your computer. You should activate this protection as soon as possible, certainly before you connect to the Internet. Choose an Internet Service Provider Using the Internet has become a natural part of daily computing.
Connection types Depending on your computer model, your location and your communication needs, you have several ways to connect to the Internet. Dial-up Some computers include a telephone dial-up (‘modem’) connector. This allows you to connect to the Internet using your telephone line. With a dial-up connection, you cannot use the modem and the telephone simultaneously on a single phone line.
Cable A cable connection provides fast and always-on Internet service via a cable television line. This service is generally available in large cities. You can use your telephone and watch cable TV at the same time you are connected to the Internet. Network connections A LAN (Local Area Network) is a group of computers (for example, within an office building or home) that share a common communications line and resources.
Also you can share an internet connection with other computers in your home. Installation speed and simplicity Installing a wireless LAN system can be fast and easy and eliminates the need to pull cables through walls and ceilings. Components of a wireless LAN To set up your Wireless network at home you need to have the following: Access point (router) Access points (routers) are two-way transceivers that broadcast data into the surrounding environment.
Wireless adapter This is connected to the computer that you wish to connect to your network, there are different types of wireless adapter available, the most common are: USB WiFi adapter: Connects to a free USB port on your computer. Wireless Expansion Card: This card is installed inside your computer in an available expansion slot. Diagram of a working network 1. Access point/router 4 2. Desktop computer 3. Modem 5 4. Printer 1 5. Portable computer 6. PDA/Smartphone 7.
Turning on/off a wireless network connection If your computer has wireless access, but does not feature a Communication button, you may turn your wireless network on or off, or control what is shared over the network with the network management options. Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Surf the Net! To surf the Internet, you need a program called an Internet browser. Internet Explorer provides an easy and secure web browsing experience.
Internet Explorer features The image below shows the Internet Explorer browser’s start page. A brief description of some key aspects of the browser are listed below. 4 5 6 7 8 9 3 10 2 1 1. Quick tabs: Select and navigate through open tabs by displaying thumbnails of them all in a single window. 2. Favorites Center: Manage your favorite websites, your browsing history and your RSS Feed subscriptions in just a few clicks. 3.
5. Address bar: Type in an Internet address (e.g. www.gateway.com) and press the Enter key on your keyboard, this will take you directly to the address you typed. 6. Tabs: View multiple sites in a single browser window by switching from one site to another through tabs at the top of the browser frame. 7. RSS feeds: Allow you to keep up with your favorite websites in an automated manner. An icon on the toolbar indicates that the site offers a subscription feed that will notify you when content is updated.
will turn yellow and a warning message will be displayed if you visit a suspected phishing site. Gateway website To get you started why not visit our website, www.gateway.com. Gateway is dedicated to provide you with on-going personalized support. Check out our Support section to get help tailored to your needs. www.gateway.
Definitions What is a virus? Malicious software, typically called ‘viruses’, are programs designed to infect and damage computers. Most viruses are transmitted over the Internet, emails or malicious Web sites. A typical virus will replicate and pass itself undetected to multiple computers. Other forms of nuisance, such as Trojan horses, worms or spam can infect your computer in various ways, using up resources or clogging up a network.
actually monitor keystrokes and capture passwords, posing a serious security risk. What is malware? Malicious software, also known as malware, is software designed to deliberately harm your computer. For example, viruses, worms, and Trojan horses are malicious software. To help protect your computer against malware, make sure it is using up-to-date antivirus and antimalware software.
as quickly and easily as possible. The more difficult you make their job, the more likely they are to leave you alone and move on to an easier target. The tips below provide basic information on how you can prevent online fraud. Keep your computer current with the latest patches and updates One of the best ways to keep attackers away from your computer is to apply patches and other software fixes when they become available.
You could think of a firewall as a sort of "policeman" that watches all the data attempting to flow in and out of your computer on the Internet, allowing communications that it knows are safe and blocking "bad" traffic such as attacks from ever reaching your computer. The next line of defense many times is your antivirus software, which monitors all online activities such as email messages and Web browsing and protects an individual from viruses, worms, Trojan horse and other types of malicious programs.
accumulated. The following tips can help make your online experiences secure: • Selecting a password that cannot be easily guessed is the first step toward keeping passwords secure and out of the wrong hands. Strong passwords have eight characters or more and use a combination of letters, numbers and symbols (e.g., # $ % ! ?).
rarely possible, the following list contains some advice for how to share personal information safely online: • Keep an eye out for phony email messages. Things that indicate a message may be fraudulent are misspellings, poor grammar, odd phrasings, Web site addresses with strange extensions, Web site addresses that are entirely numbers where there are normally words, and anything else out of the ordinary.
you to login or provide other sensitive data. Another sign that you have a secure connection is the small lock icon in the bottom of your web browser (usually the right-hand corner). • Pay attention to privacy policies on Web sites and in software. It is important to understand how an organization might collect and use your personal information before you share it with them. • Guard your email address.
hard to believe, ask for someone else's opinion, read the fine print, or even better, simply ignore it. Review bank and credit card statements regularly The impact of identity theft and online crimes can be greatly reduced if you can catch it shortly after your data is stolen or when the first use of your information is attempted.
To open the Action Center, click on Start and Security > Action Center. > Control Panel > System Alternatively, if a security alert has been reported (in the Notification Area, next to the clock) then you can click on the notification balloon or doubleclick on the small Security Alert icon. The Action Center indicates the status and settings used for important applications that protect your computer.
Certain programs need access to the Internet to function properly, or even to function at all. If this is the case, you will usually be asked to allow access when you install a program, or the first time you use it. To check firewall settings, click on Start > Control Panel > System and Security > Windows Firewall. Note: When you first start to use a Firewall it is in a ‘Learning mode’, you may see pop-up windows alerting you that certain programs you know and trust wish to access the internet.
Windows Updates If you have an active Internet connection, Windows can check for important updates for your computer and install them automatically. These updates include security patches and program updates that can improve your computing experience and help protect your computer against new viruses and attacks. Windows Defender Windows Defender helps protect your computer against malicious and unwanted software, such as spyware and adware. Windows Defender is installed and turned on by default.
Caution: Please note that most security software suites provide similar functionality and will disable Windows Defender in order to improve system performance. User Account Control The User Accounts control panel can help prevent unauthorized changes to your computer. User Accounts will ask you for permission or an administrator password before performing actions that could potentially affect your computer's operation or that change settings that affect other users.
To access User Account settings, click on Start User Accounts and Family Safety > User Accounts. > Control Panel > Note: You may turn off the User Account Control Messages (not recommended) in the User Account Control settings window. Internet Explorer security settings Internet sites use small files called cookies to keep track of user preferences and information.
HELPDESK SAFE COMPUTING To make the most of your new computer and ensure it runs smoothly for a long time, you should use the programs below and regularly perform the actions described in this guide. Maintenance Recommended maintenance tasks There are several tasks you should perform periodically (about once per month) to ensure your computer stays in good health: Error checking Using the Check Disk tool regularly prevents your system from getting unreliable and information getting lost.
3. Tick Automatically fix file system errors in the options area. If you tick Scan for and attempt recovery of bad sectors, your computer will carry out the physical error checking when you next restart your computer. Click on Start to proceed. Disk Cleanup The Disk Cleanup Wizard helps free up space on your disk drive. It searches your drive and displays unused files, such as temporary Internet files, files in the Recycle Bin and other temporary files that you may safely delete. 1.
Disk Defragmenter With the creation and deletion of files over time, scattering occurs all over the hard disk area and affects performance. The Disk Defragmenter helps you rearrange the items stored on your hard drive to make your computer run faster and more efficiently. Running the Disk Defragmenter once a month (depending on computer usage) will decrease wear and tear on your hard drive and thus decrease the chance of a fault developing at a later date. 1.
Manage your hard disk drive (HDD) Check the remaining free space on your hard disk drive 1. Click on Start > Computer. 2. Right-click on the Gateway icon and select Properties. 3. The Hard Disk Properties window displays the amount of used space and free space on your hard disk. If your hard disk is almost full (less than 200 MB remaining), you should consider freeing some space. To see easily how much space is used and how much is left, simply place your pointer over the hard disk drive icon.
2. Uninstall the programs you no longer use: Click on Start Features. > Control Panel > Programs > Programs and 3. Archive files on an external hard disk drive, recordable CDs or DVDs (if your computer is equipped with a CD or DVD writer) and delete them from the hard disk. Run Windows System Tools Windows includes some convenient tools to keep your computer in good shape.
Windows System Restore. System Restore monitors changes to your computer and automatically creates restore points that store your computer’s configuration each time a major change occurs (such as installing programs). It can undo harmful changes to your computer and restore settings and performance without removing your personal data files (such as documents, browsing history, photos, favorites, or emails). Note: If you only need to uninstall a program, do not use System Restore.
If you cannot access the Windows desktop: 1. Press the Alt+F10 key upon start-up when the Gateway logo appears. This will open the Recovery Program. 2. Select Windows System Restore and click Next. Your computer will automatically restart and open System Restore. System Restore options Restore your computer to an earlier time This option will return to your computer to how it was on an earlier date, without affecting your personal documents or emails (it will not restore lost documents either).
Create a Restore Point Windows creates restore points automatically at regularly scheduled times or before certain programs or drivers are installed. This option allows you to create your own restore points when you need to. 1. Click Start > Control Panel > System and Security > System. Click on System protection in the sidebar and then click the Create... button. 2. Enter a description to identify this restore point. System Restore automatically adds the date and time to this name. 3.
• Perform updates when prompted by Windows Action Center. • Use Microsoft Windows Automatic Updates. • Run Windows Update. Internet security Norton Internet Security, combined with other security applications can protect your computer from Internet attacks and ensure that the latest security updates have been downloaded and installed on your computer. Norton Internet Security performs automatic updates through Live Update.
Windows Remote Assistance Remote Assistance allows a Windows user to temporarily take over a remote Windows computer over a network or the internet to resolve issues. Remote Assistance makes it possible to diagnose and repair problems with a computer without personally visiting it. You can access Remote Assistance by clicking on Start > All Programs > Maintenance > Windows Remote Assistance.
FREQUENTLY ASKED QUESTIONS The following questions indicate possible situations that may arise during the use of your computer and each is followed by easy answers and solutions. I pressed the power button but the system did not boot up. Check the LED on the power button. If the LED is not lit, no power is being applied to the system. Try the following: • Check if you properly plugged the power cable into an electrical outlet. • If you are using a power strip, make sure it is plugged in and turned on.
Nothing appears on the screen. Your computer's power management function automatically blanks the screen to save power. Press any key to turn the display back on. If pressing a key does not work, you can restart your computer. If there is still nothing on the screen, check cables and connections: • Make sure the monitor is connected to a power outlet and that it is turned on. • Make sure that the monitor is correctly connected to the computer.
option. You can also press the volume control/mute knob on your USB keyboard to toggle from mute to sound on. • If headphones, earphones or external speakers are connected to the line-out jack of your computer, the internal or built-in speakers are automatically turned off. System cannot read hard disk or optical disc drive information. Check the following: • Make sure you are using the correct type of disk. • Make sure the disc is inserted into the drive correctly.
R E C OV E R Y GATEWAY RECOVERY MANAGEMENT If your computer experiences problems that are not recoverable by other methods, you may need to reinstall the Windows operating system and factory-loaded software and drivers. To ensure you can recover your computer when needed, you should create a recovery backup as soon as possible. Creating recovery discs To reinstall using discs, you must create a set of recovery discs beforehand. Throughout the process, you will be guided by on-screen instructions.
2. To create recovery discs for the hard drive’s entire original contents, including Windows and all factory-loaded software and drivers, click Create Factory Default Disc. - OR To create recovery discs for only the factory-loaded software and drivers, click Create Drivers and Applications Backup Disc. Important: We recommend that you create each type of recovery disc as soon as possible.
The Create Factory Default Backup dialog box opens. This dialog box tells you the number of blank, recordable discs you will need to complete the recovery discs. Make sure that you have the required number of identical, blank discs ready before continuing.
3. Insert a blank disc into the drive indicated in the Backup to list, then click Next. You will be shown the backup progress on the screen. The drive ejects each disc as it completes burning it. 4. Remove the disc from the drive and mark it with a permanent marker. Important: Write a unique, descriptive label on each disc, such as ‘Windows Recovery Disc 1 of 2’ or ‘Apps/Drivers Recovery disc’. Make sure you keep the discs in a safe place that you will remember. 5.
RECOVERING YOUR SYSTEM If Gateway support did not help fix your problem, you can use the Gateway Recovery Management program. This will restore your computer to the same state as when you purchased it, while giving you an option to retain all settings and personal data for later retrieval. To recover your system: 1. Perform minor fixes. If only one or two items of software or hardware have stopped working correctly, the problem may be solved by reinstalling the software or the device drivers.
If nothing else has solved the problem and you want to reset your system to factory condition, see “Returning your system to its factory condition” on page 74. Types of recovery Recovering pre-installed software and drivers As a troubleshooting step, you may need to reinstall the software and device drivers that came pre-installed on your computer from the factory. You can recover using either your hard drive or the backup you have created.
2. Click on the Restore tab, then click Reinstall Drivers or Applications. The Gateway Application Recovery main menu opens. 3. Click on Contents. A list of software and device drivers opens. 4. Click on the install icon for the item you want to install, then follow the on-screen prompts to complete the installation. Repeat this step for each item you want to reinstall.
Help: For more information about using Microsoft System Restore, click Start, then click Help and Support. Type windows system restore in the Search Help box, then press Enter. To return to a restore point: 1. Click on Start > Control Panel > System and Security > Action Center, then click on Recovery. 2. Click on Open System Restore, then Next. 3. Click on he restore point you want, click on Next, then Finish. A confirmation message box appears. 4. Click on Yes.
• If you cannot run Windows and your original hard drive is still working, see “Recovering from the hard drive during startup” on page 76. • If you cannot run Windows and your original hard drive has been completely re-formatted or you have installed a replacement hard drive, see “Recovering from your recovery discs” on page 76. Recovering from within Windows To reinstall Windows and all pre-installed software and drivers: 1.
Recovering from the hard drive during startup To reinstall Windows and all pre-installed software and drivers: 1. Turn on your computer, then press Alt+F10 during startup. Gateway Recovery Management opens. 2. Click on Restore system from factory default. Caution: Continuing the process will erase all files on your hard drive. 3. Click on Next. Your hard drive’s original, factory-loaded contents are recovered. This process will take several minutes.
6. Your computer will restart. 3. During startup, press F12 to open the boot menu. The boot menu allows you to select which device to start from, such as the hard drive or an optical disc. 4. Use your arrow keys to select the line CDROM/DVD (this line may start with ’IDE 1...’), then press Enter. Windows installs from the recovery disc you inserted. 5. Insert the second recovery disc when prompted, then follow the onscreen prompts to complete the recovery.
REGULATORY INFORMATION WIRELESS DEVICES Caution: Wireless devices are not user-serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact Gateway for service information. Caution: The transmitting device embedded in this computer may not be used with any antenna other than the one provided with the computer. Warning: Using wireless devices while flying in aircraft is prohibited.
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation.
TELECOMMUNICATIONS PER PART 68 OF THE CODE OF FEDERAL REGULATIONS (CFR 47) (APPLICABLE TO PRODUCTS FITTED WITH USA MODEMS) Your modem complies with Part 68 of the Code of Federal Regulations (CFR 47) rules. On the computer or modem card is a label that contains the FCC registration number and Ringer Equivalence Number (REN) for this device. If requested, this information must be provided to the telephone company. A telephone line cord with a modular plug is required for use with this device.
− Perform such activities in the off-peak hours such as early morning or late evenings.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada. TELECOMMUNICATIONS PER INDUSTRY CANADA CS-03 (FOR PRODUCTS FITTED WITH AN ICCOMPLIANT MODEM) The Industry Canada label identifies certified equipment.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
EN60950-1: Product Safety. If your computer includes a telecommunication network board, the input/output socket is classified as Telecommunication Network Voltage (TNV-3). Note for computers equipped with wireless controllers and wired modems: Hereby, Gateway, declares that the wireless devices provided with this computer include a low power radio transmitter in full compliance with the essential requirements and other relevant provisions of Directive 1999/05/EC for Low Voltage, EMC and RF of the R&TTE.
Remote earths To prevent electrical shock, connect all local (individual office) computers and computer support equipment to the same electrical circuit of the building wiring. If you are unsure, check the building wiring to avoid remote earth conditions. Building supply Only connect the equipment to a building supply that is in accordance with current wiring regulations in your country. In the U.K., these are the IEE regulations.
agency approval marking. The cord must be suitable for use in the end-user country. Consult your dealer or the local electrical authorities if you are unsure of the type of power cord to use in your country. Cables For cables which are not delivered with the Product in the computer's packaging: The EMC performance of the system is guaranteed only if the cable and interface use efficient shielding.
LASER COMPLIANCE STATEMENT The optical devices are tested and certified to be compliant with International Electrotechnical Commission IEC60825-1 and European EN60825-1 standards for Class 1 laser products. Class 1 laser products are not considered hazardous. The optical devices are designed such that there is never human access to laser radiation above a Class 1 level during normal operation or prescribed maintenance conditions.
ENVIRONMENT OUR COMMITMENT TO ENVIRONMENTAL PROTECTION Environment has been at the heart of our products. Gateway is committed to limit the environmental impact of its products during product lifecycle. Starting at design phase, with a very strict procurement policy, maximum attention is given to electronic components in order to limit their weight in heavy metals such as lead, cadmium, chromium, mercury, etc. Suppliers are asked, for each part of any product, to respect all regulations.
with your local authority, or by returning your old equipment to your retailer if you are replacing it. For information, visit www.gateway.com/about/corp_responsibility/ environment.php. Battery disposal (when applicable) Before disposing of your equipment ensure that you have removed any batteries that may be fitted in the equipment. European law states that batteries must be collected for disposal separately from household waste. Do not throw your used batteries in the dustbin.
S O F T W A R E L IC E NS E Note: Most of the software applications are already preinstalled on your Gateway computer. They are ready to use or to set up. However, some titles require a CD or DVD to run. You will find these discs in your computer's packaging. Gateway License Agreement (CD and/or DVD Products). This copy of the original is your proof of license. Please treat it as valuable property. Important! Read carefully before installing the software. The following License Agreement applies to you.
is not “in use.” If the anticipated number of users of the SOFTWARE will exceed the number of applicable Licenses, then you must have a reasonable mechanism or process in place to assure that the number of persons using the SOFTWARE concurrently does no exceed the number of Licenses.
The Free Software is distributed in the hope that, but it will be useful WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The provisions of the GNU General Public License shall always apply. You may access http://www.gnu.org directly to obtain a copy of the GPL or write to the free Software Foundation, Inc. and request a copy. The address of the Free Software Foundation, Inc is: 59 Temple Place - Suite 330, Boston, MA, 02111-1307, USA.
I NDEX A Audio CDs .............................................................. 27 Autoplay .................................................................. 29 B Batteries .................................................................. 89 Blu-ray ....................................................................... 28 battery disposal .................................................. 89 Browser .................................................................... 37 C Cables .....................
system did not boot up ......................... 64 H Health precautions ............................................ 10 HDD (Hard Disk Drive) Free space ...................................................... 55 Helpdesk .................................................................. 54 Management ............................................... 57 I Firewall ..................................................... 42, 49 Interference ..........................................................
R Removing hardware ......................................... 21 Recovery System Restore ........................................... 59 Removing software ........................................... 57 Regulatory Information........................... 78, 88 Restore points ...................................................... 60 Removable media devices ............................ 21 S Safe Computing.................................................. 54 Safety precautions ...................................
W Warranty.................................................................... 6 Welcome Center ................................................ 25 WiFi ............................................................................ 34 Windows System Restore ........................................... 59 Using Windows .......................................... 25 Welcome Center ........................................ 25 96 Windows Action Center .......... 48, 49, 61 Windows automatic updates ......