- One Gateway Computer Reference Guide

www.gateway.com
51
5 If you are using the new hard drive as your primary
drive, install Windows using the operating system DVD
that came with your computer. For more information on
restoring your system, see “Recovering your system” on
page 92.
Adding or replacing
Mini PCI cards
To add or replace a Mini PCI card:
1 Open the back panel by following the instructions in
“Opening and closing the case” on page 46. The
computer should be face-down on a soft, stable,
non-marring surface before continuing.
2 Locate the Mini PCI card slots.
3 If you are replacing a card, remove the two screws that
secure the old card to the case, remove any antenna
cables attached to the card, then pull the card out of the
card slot.
Tools
• Phillips screwdriver
Mini PCI card slot 2
Mini PCI card slot 1
Card screws Antenna cables
8512740.book Page 51 Thursday, September 27, 2007 2:43 PM