User's Manual

ADAC Ultra2 S466 Hardware Guide

Step 11 Run ADAC BIOS Setup

Press <Ctrl> <M> to run the ADAC BIOS Setup utility.

See the ADAC Ultra2 S466 Configuration Software Guide

for information about running BIOS Setup.

Step 12 Install Operating System Driver

The ADAC Ultra2 S466 ASPI driver can be used in the

DOS and Windows 95 environments. The DOS ASPI

driver supports:

• up to six non-disk SCSI devices (each SCSI device

must use a unique SCSI ID regardless of the SCSI

channel it resides on. SCSI IDs 1 through 6 are valid,

•

up to 12 ADAC Ultra2 S466 adapters, and

•

virtual DMA services (VDS) for up to eight logical

drives.

ASPI Driver CorelSCSI, Novaback, and PC Tools are not provided with

ADAC Ultra2 S466.

Drivers Devices Supported Application Software Features

ADACASPI.SYS CD-ROM, tape,

optical drives, etc.

CorelSCSI, Novaback, PC

Tools.

VDS

Copy ADACASPI.SYS to your hard disk drive. Add the

following line to CONFIG.SYS:

device=<path>\ADACASPI.SYS

Parameters The ADACASPI.SYS parameters are:

Parameter Description

/h INT 13h support is not provided.

/v Verbose mode. All message are displayed on the screen.

/a Physical drive ccess mode. Direct access to physical drives is

permitted.

/q Quiet mode. All message except error message are suppressed.

Cont’d