Safety Data Sheets (SDS)

ManualsBrandsGator ManualsBuilding materialsPatchMax™ All-Purpose Filler - 8 oz.

SAFETY DATA SHEET

Revision date 29-Aug-2018 Version 1 Supersedes Date: No information available

Section 1: PRODUCT AND COMPANY IDENTIFICATION

Product Name

Product Code

UN/ID no

Recommended Use

AG47 LTWT FILLER, 1 Qt. Can / 3 PER CASE

8741

UN1866

Fillers and putty

Details of the supplier of the safety data sheet

See section 16 for more

information

(937) 878-3946

Section 2: HAZARDS IDENTIFICATION

This product has been classified in accordance with the hazard criteria of the Hazardous Products Regulations (HPR) and

the SDS contains all the information required by the HPR

Classification

Skin corrosion/irritation Category 2

Serious eye damage/eye irritation Category 2

Respiratory sensitization Category 1

Skin sensitization Category 1

Carcinogenicity Category 1B

Reproductive toxicity Category 2

Specific target organ toxicity (repeated exposure) Category 1

Label elements

Flammable liquids

Category 3

Product Code 8741

Page 1 / 8

WPNA - UNITED STATES WHMIS SDS

Ali Industries Inc.

747 East Xenia Dr.

Fairborn, OH 45324

E-mail address

Emergency telephone number

info@gatorgrit.com

Summary of content (8 pages)

PAGE 1
SAFETY DATA SHEET Revision date 29-Aug-2018 Version 1 Supersedes Date: No information available Section 1: PRODUCT AND COMPANY IDENTIFICATION Product Name AG47 LTWT FILLER, 1 Qt. Can / 3 PER CASE Product Code 8741 UN/ID no UN1866 Recommended Use Fillers and putty Details of the supplier of the safety data sheet See section 16 for more information Ali Industries Inc. 747 East Xenia Dr. Fairborn, OH 45324 E-mail address info@gatorgrit.
PAGE 2
Signal word DANGER HAZARD STATEMENTS Flammable liquid and vapor Causes skin irritation Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction May cause cancer Suspected of damaging fertility or the unborn child Causes damage to the following organs through prolonged or repeated exposure: Ears PREVENTION Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.
PAGE 3
Styrene 1,2,3,6-Tetrahydrophthalic anhydride Titanium dioxide N,N-Dimethylaniline 100-42-5 85-43-8 13463-67-7 121-69-7 10 - 30 * 0.5 - 1.5 * 0.5 - 1.5 * 0.1 - 1 * *The exact percentage (concentration) of composition has been withheld as a trade secret. Section 4: FIRST AID MEASURES First Aid Measures General advice Get medical advice/attention if you feel unwell. Eye contact IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
PAGE 4
Special protective equipment for fire-fighters Wear self-contained breathing apparatus and protective suit. Cool containers with flooding quantities of water until well after fire is out. Do not allow run-off from fire-fighting to enter drains or water courses. Section 6: ACCIDENTAL RELEASE MEASURES Personal precautions Avoid breathing vapors or mists. Remove all sources of ignition. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing.
PAGE 5
STEL: 50 mg/m3 S* STEL: 50 mg/m3 S* Engineering Controls Ensure adequate ventilation, especially in confined areas. Provide local exhaust ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Personal Protective Equipment Eye/face protection Tight sealing safety goggles. Hand Protection There is no one glove material or combination of materials that will give unlimited resistance to any individual or combination of chemicals.
PAGE 6
Stability Stable under normal conditions. Incompatible materials Bases. Strong oxidizing agents. Strong acids. Acids. Alkali. Aluminum. Copper. Halogens. Conditions to avoid Heat, flames and sparks. Hazardous Decomposition Products Carbon monoxide. Carbon dioxide (CO2). Hydrocarbons. Possibility of Hazardous Reactions None under normal processing. Hazardous polymerization None under normal processing.
PAGE 7
OSHA (Occupational Safety and Health Administration of the US Department of Labor) X - Present.
PAGE 8
Chemical Name Styrene 1,2,3,6-Tetrahydrophthalic anhydride Canada - NPRI (National Pollutant Release Inventory) Part 1, Group A Substance; Part 5, Individual Substances Part 4 Substance (as set out in Section 65 of the List of Toxic Substances in Schedule 1 of the Canadian Environmental Protection Act, 1999) Part 1, Group A Substance (total of the acid/base and its salts expressed as the molecular weight of the acid/base) N,N-Dimethylaniline Section 16: OTHER INFORMATION HMIS Health hazards 3* * = Chro