Safety Data Sheets (SDS)

Styrene 100-42-5 10 - 30 *
1,2,3,6-Tetrahydrophthalic anhydride 85-43-8 0.5 - 1.5 *
Titanium dioxide 13463-67-7 0.5 - 1.5 *
N,N-Dimethylaniline 121-69-7 0.1 - 1 *
*The exact percentage (concentration) of composition has been withheld as a trade secret.
Section 4: FIRST AID MEASURES
First Aid Measures
General advice
Get medical advice/attention if you feel unwell.
Eye contact
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If
eye irritation persists: Get medical advice/attention.
Skin Contact
Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention.
Inhalation
IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Ingestion
Do NOT induce vomiting. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
Most important symptoms and effects, both acute and delayed
Symptoms
No information available.
Indication of any immediate medical attention and special treatment needed
Note to physicians
Treat symptomatically.
Section 5: FIRE FIGHTING MEASURES
Flammable properties
Flammable liquid.
flash point
84 °F / 29 °C
Upper flammability limit:
No information available
Lower flammability limit:
No information available
Autoignition temperature
No information available
Explosion data
Sensitivity to Mechanical Impact No information available.
Sensitivity to Static Discharge No information available.
Suitable extinguishing media
Dry chemical, CO2, water spray or alcohol-resistant foam.
Not to be used for safety reasons: Strong water jet
Hazardous combustion products
Carbon monoxide. Carbon dioxide (CO2).
Product Code 8741
Page 3 / 8
WPNA - UNITED STATES WHMIS SDS
Specific hazards arising from the chemical
Burning produces heavy smoke. Fire may produce irritating and/or toxic gases. In the event of fire and/or explosion do not breathe
fumes. May cause sensitization by inhalation. May cause sensitization by skin contact.