Designio Installation User Instructions

PR0699 Issue 6 (August 2014)

Designio Frame

For use with 16" VFC Convector, Logic Hotbox, Logic Convector,

Logic HE, E-box™ & E-Studio™

Instructions for Use and Installation

For use in GB, IE (Great Britain and Republic of Ireland)

PAGE 1
Designio Frame For use with 16" VFC Convector, Logic Hotbox, Logic Convector, Logic HE, E-box™ & E-Studio™ Instructions for Use and Installation For use in GB, IE (Great Britain and Republic of Ireland) PR0699 Issue 6 (August 2014)
PAGE 2
Installation Instructions Covering frame model numbers: Model 16" VFC Logic Hotbox & Convector 8251GP/ 8251IR E-Box™/ E-Studio™ Logic HE Convector (Manual & Remote only) 912-396/ 912-018 1. General 1.1 These instructions are supplementary to, and must be read in conjunction with, the installation instructions supplied with the appliance. Read both thoroughly before installation. 1.2 Fitting of this decorative front is to be carried out after the appliance has been installed. 2.
PAGE 3
Installation Instructions/ User Instructions 3. Opening the Designio Frame 3.1 When the frame is fitted, the frame door may be opened by placing your hand at the lower right hand side and pulling forward, see Diagram 8. 5 4. Commissioning Logic Hotbox/ Logic Convector / VFC 4.1 Continue with the commissioning tests, detailed in the Installation Instructions supplied with the appliance. 5. Cleaning the Frame 5.1 Only clean the frame when it is cold. 5.2 Do not use abrasive cleaners. 5.
PAGE 4
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG Technical Customer Services: (01392) 261950 Fax: (01392) 261951 E-mail: technicalservices@gazco.