Logic HE Range Conventional Flue Log Effect Installation User Instructions

10
Note: Change the batteries in the handset before
they are flat, to avoid having to reprogram the time
of day in again. N.B. Pairing is not lost, even if the
batteries are removed or flat.
The appliance Control Box requires 3 AA size alkaline batteries.
The handset requires 2 AA size alkaline batteries.
4a.1 The appliance battery is located in the Control Box at the
bottom of the appliance behind the ash cover.
4a.2 Slide the white Power Switch on the Control Box to the
OFF position before attempting to change the batteries.
11
Power Switch
4a.3 The battery covers can be opened without tools by using a
fingernail and pressing to unhook the clip that retains the
cover, see Diagram 12.
12
Control Box
Remote Control
User Instructions
4a.4 The orientation of these is shown molded into the battery
compartment, see Diagram 13.
13
Remote Control
Control Box
Power Supply via Micro USB
It is possible to power the Control Box via a 5V
Micro USB connection, see Diagram 14.
If a USB lead is used batteries are not required in
the Control Box.
DO NOT CONNECT OTHER ELECTRIC DEVICES TO
THE CONTROL BOX.
4a.5 After fitting the batteries, slide the white Power Switch on
the Control Box to the ON position for the appliance to
operate, see Diagram 14.
14
Power Switch
Micro USB Port
Note: The white Power Switch does not need to be
turned off each time the appliance is not in use.
However, if the appliance is left unattended for long
periods of time (e.g. vacation), it is recommended
to place the Power Switch into the off position.