Logic HE Range Conventional Flue Log Effect Installation User Instructions

Handset Initial Set Up

Following initial set up or new pairing it will be necessary to set the

time and date.

Note: Pressing SET button will advance the display

to the next screen and pressing MODE button will

return it to the previous setting.

Setting the Time

9b.1 Once the handset is paired the screen will show that the

time is not yet set, see Diagram 35. The handset will then

automatically progress to the next setup screen, see

Diagram 36.

Setting the display for 12 or 24 Hour Clock

9b.2 Holding the remote to keep the green light on and the

handset unlocked the handset will display an H:24, see

Diagram 36.

24 denotes a 24 hour clock and 12 denotes a 12 hour clock.

9b.3 Press the + or - button on the handset to toggle between the

two settings.

Press the SET button to confirm and progress to setting the

day of the week.

Setting the Day of the Week

9b.4 Press and release the + and - buttons until the correct day

of the week is shown on the display.

Installation Instructions

Mo = Monday, Tu = Tuesday, We = Wednesday, Th = Thursday,

Fr = Friday, Sa = Saturday and Su = Sunday.

9b.5 Press SET to confirm the day of the week and progress to

setting the time.

Setting the Hour

9b.6 Press and release the + or - button to change the hour to

the correct hour. Press SET to confirm and progress to

setting the minute.

Setting the Minutes

9b.7 Repeat the process to change the minutes.

Setting the Temperature Display (Celsius or Fahrenheit)

9b.8 Press and release the + or - button to toggle between C and

F. When the display shows the desired symbol, press and

release the SET button to store.

9b.9 Place the handset down and wait until the home screen is

displayed and the unlock light goes off.

ALL THE NECESSARY SETTINGS REQUIRED HAVE

NOW BEEN COMPLETED. ANY FURTHER

FUNCTIONS ON THIS HANDSET ARE FOR

FACTORY SETTING AND NOT TO BE USED.

The Handset is now ready to operate the appliance.