Logic HE Range Conventional Flue Log Effect Installation User Instructions

39
Servicing Instructions - Replacing Parts
10. Main Injector
10.1 Undo the compression nut from the feed pipe, see Diagrams
27 & 28, Arrows A.
10.2 Undo the lock nut from the injector, see Diagrams 27 & 28,
Arrow B.
A
B
27
Slide Control
A
B
28
Remote Control
10.3 Replace with the correct replacement injector. When
ordering, always state the model, gas type and serial
number.
10.4 Reassemble and turn the gas supply on, check for any
leaks.
11. Ignition Unit
(Slide Control Model only)
11.1 Remove the battery, see Section 3.
11.2 Remove the 2 screws to remove the heat shield, see
Diagram 29.
Screws
29
11.3 Remove the 2 leads and the pilot ignition lead from the
ignition unit, see Diagram 30.
Leads
30
Pilot Ignition
Lead
Screw
11.4 Undo the screw securing the unit in place, see Diagram 30.
11.5 Replace in reverse order.
12. Baffle & Liners
The Baffle and Liners do not need to be removed for
servicing.
BAFFLE
12.1 Undo the 3 screws securing it to the roof of the firebox, see
Diagram 31.
Screws
31
Rear Lip
12.2 The baffle can now be removed by lowering the front edge
and pulling forward through the front of the appliance.
TAKE CARE NOT TO DAMAGE THE SIDE PANELS.
12.3 Note: When replacing the baffle ensure that the rear edge
locates above the rear lip, see Diagram 31.