Harmony 10 Quick Start Guide
Gazco Limited, Osprey Road, Sowton Industrial Estate,
Exeter, Devon, England EX2 7JG
Tel: (01392) 261950 Fax: (01392) 261951
E-mail: technicalservices@gazco.com
A member of the Stovax Group
E & O E
PR2339 Issue 1 (November 2016)
QUICK START
GUIDE TO OPERATION
PLEASE NOTE
This is a quick guide to using your Gazco fire.
A more detailed explanation is found
in the main Instructions for
Use, Installation and Servicing.
Setting Fahrenheit or Celsius
To change between °C and °F press and
buttons simultaneously.
NOTE: Choosing °F results in a 12 hour clock.
Choosing °C results in a 24 hour clock.
Troubleshooting
IMPORTANT: In the unlikely event that the handset
fails to communicate correctly with the appliance
it may be necessary to turn off the gas supply at
the isolation valve until any problems can be
resolved.
The gas meter and isolation valve can be located
outside in a meter box, under the stairs, beneath
the kitchen sink or in the garage. Whilst this list is
not exhaustive, it is important to be able to
identify the location of the valve in case of any
gas emergency.
To turn off the gas supply, simply turn the handle
so the lever is at 90 degrees to the upright gas
pipe.
If you smell gas, open doors and windows and
never operate any electrical switches.
Immediately call the Gas Emergency Services on
0800 111 999.
PR2339 Thermostatic Quick Start Guide Issue 1.indd 1 17/11/2016 08:02