MyFire Wifi Fitting Kit

ManualsBrandsGazco ManualsGas FiresEdge

PR2466 MyFire WiFi Fitting Kit Issue 1 (October 2017)

MyFire WiFi Fitting Kit

For use with the Reflex Range

Instructions for Installation

For use in GB & IE (Great Britain & Republic of Ireland).

IMPORTANT

These products are only for use with Gazco Reflex products listed and must be installed and used in accordance

with these instructions.

Summary of content (4 pages)

PAGE 1
MyFire WiFi Fitting Kit For use with the Reflex Range Instructions for Installation For use in GB & IE (Great Britain & Republic of Ireland). IMPORTANT These products are only for use with Gazco Reflex products listed and must be installed and used in accordance with these instructions.
PAGE 2
Installation Instructions General Kit Contents - Conventional Flue 1 x WiFi Module 1 x WiFi Cable 2 x Velcro Pads 2 x Instruction Manuals This manual has been designed to show the installation methods available to fit a MyFire WiFi module to the Reflex. Please carefully read in conjunction with the Installation Instructions for the Reflex making sure the appropriate method is understood before attempting to install the product.
PAGE 3
Installation Instructions - Conventional Flue NOTE: Ensure none of the wires are snagged or caught on any internal components. 1.5 Rotate and slide the air guide into position with the ends locating under the side brackets. Ensure that the angled metal is sloping towards the front of the appliance. 4 Once connected, replace the service hatch in reverse order. 2.3 Replace the Glass Frame. The installation is now complete.
PAGE 4
Installation Instructions - Balanced Flue Balanced Flue Models 1.2 1. Fitting the WiFi Module Carefully position the WiFi Module in the module bracket, ensuring the correct orientation, see Diagrams 3 & 4. 3 1.1 Remove the Glass Frame, see Instructions provided with appliance model. 1.3 Connect the module lead to the WiFi module, see Diagram 1. 1 4 1.3 The receiver is located in front of the module bracket, beneath the Main Control Assembly, see Diagram 2.