Reflex 75T Multi Sided Balanced Flue User Manual

5
Increasing the Flame Height:
To increase flame height press and hold button.
Decreasing the Flame Height:
To decrease flame height press or to set the appliance to pilot
flame and hold the button.
NOTE: While pressing a button a symbol indicating
transmission appears on the display. The receiver
confirms transmission with a sound signal.
THERMOSTATIC MODE
(AUTOMATIC)
To select the Thermostatic mode press the button.
The preset temperature will show briefly then the current room
temperature will be displayed.
Setting the temperature:
Press and hold the button until the temperature display
flashes.
Adjust the temperature by pressing the or button.
Press the button to confirm the temperature.
NOTE: If you set a temperature that is beneath the
current room temperature, the fire automatically
switches to PILOT (Standby).
Exiting Thermostatic Mode:
Press the button to exit Thermostatic mode.
Press the or button to enter Manual Mode.
Press the button to enter Program Mode.
Press the button to enter EcoFlex Mode.
PROGRAM MODE (AUTOMATIC)
To select the Program mode press the button.
The set temperature for the On time is the one set in Thermostatic
Mode. Changing the thermostat temperature changes the
temperature in Program mode.
Default Settings
The On time (Thermostatic) Temperature is 21°C (70°F).
The Off time Temperature is '--' (Pilot flame only).
Temperature Settings
Press the button and hold until the display flashes ON
and set the temperature (See Thermostatic Mode) is displayed.
Press the button or wait until OFF is displayed and the
temperature flashes.
Adjust the temperature by pressing the or button.
Press the button to confirm the temperature.
NOTE: The On (Thermostatic) and Off set temperature is the same
for each day.
Day Setting:
ALL Flashes. Press or button to choose between ALL,
SA,SU, 1, 2, 3, 4, 5, 6, 7.
Press the button to confirm.
ALL Selected
ON TIME SETTING (PROGRAM 1):
, 1 ON displayed, ALL is displayed shortly and hour flashes.
Select the hour by pressing the or button.
Press the button to confirm. , 1 ON displayed, ALL is
displayed shortly and minutes flashes.
Select the minutes by pressing the or button.
Press the button to confirm.
OFF TIME SETTING (PROGRAM 1):
, 1 OFF displayed, ALL is displayed shortly and hour flashes.
Select the hour by pressing the or button.
Press the button to confirm. , 1 OFF displayed, ALL is
displayed shortly and minutes flashes.
Select the minutes by pressing the or button.
Press the button to confirm.
NOTE: either continue to PROGRAM 2 and set on and
off times or stop programming at this point and
PROGRAM 2 remains deactivated.
PROGRAM 1 and PROGRAM 2 use the same On
(Thermostatic) and Off temperatures for ALL, SA:SU
and Daily Timer (1, 2, 3, 4, 5, 6, 7). Once a new On
(Thermostatic) and/or Off temperature has been set,
that temperature becomes the new default setting.
If ALL, SA:SU or Daily Timer are programmed for
PROGRAM 1 and PROGRAM 2 On and Off times these
become the new default times. The batteries must be
removed to clear PROGRAM 1 and 2 On and Off times
and temperatures.
USER INSTRUCTIONS