Gazco-logic-fires-brochure

Technical Specifications
All specifications given in this brochure are approximate. Actual specifications for each individual product will vary according to model.
Your Gazco retailer will be pleased to provide any further information you require or you may view/download specification sheets
from www.gazco.com
Installation and Safety
Gazco gas fires must be fitted by a qualified gas installer (GasSafe registered in the United Kingdom or RGII registered in the Republic
of Ireland) who should also verify the proposed site conditions are fully suitable for the product selected. Complete installation
instructions for many models can be obtained prior to purchase by viewing or downloading them from www.gazco.com
When designing your own installation, please also observe the minimum distance to combustible materials as stated in the
installation instructions.
Please note that all parts of these fires, particularly the glass panel on certain models, become extremely hot during operation and can
result in serious injury and burns if touched. It is therefore recommended that a fireguard complying with BS 8423:2002 is used in the
presence of young children, the elderly or infirm.
Colours/Flame pictures
Owing to variations in studio lighting & printing inks, the finishes/colours of fires illustrated in this brochure may differ slightly from
actual models. Before purchasing, please ask your retailer to show you finish/colour samples. All flame pictures shown in this brochure
are taken from real fires. Please note however that flame pictures will vary depending on flue conditions and surrounding geographical
features. Some of the photography in this brochure may not comply with the requirement of the latest building regulations given as
these are subject to constant change. You should always check you proposed installation arrangement with a a qualified gas installer
before proceeding.
Care and maintenance
Traditional materials, such as polished steel and brass, tarnish on contact with air especially when also exposed to heat. To help
minimise this effect, we recommend fires receive regular treatment with suitable proprietary cleaners. Additionally, please remember
that gas fires will require servicing annually by a qualified gas installer (GasSafe registered in the United Kingdom or Bord Gáis
registered in the Republic of Ireland).
Warranty and product improvement
Your Gazco Expert Retailer will provide you with a Two Year Warranty for your new gas fire. This can be further extended
to a Five Year Warranty, provided you register your product with Gazco. Fires purchased outside of Gazco's Expert
Retailer Network will carry a standard Non-Extendable One Year Warranty. Please note these warranties are dependant
on your appliance being serviced 12 months after installation and annually thereafter and excludes certain consumable
parts. Full details of this warranty are available at www.gazco.com.
Gazco pursue a policy of continuous product improvement, therefore, whilst our products are correct at the time of the photography, we
reserve the right to make alterations & amendments. Exact product details should be discussed with your retailer at the time of purchase.
Air ventilation for gas fires
To comply with gas appliance installation regulations, all fire baskets and standard versions of the Classic Fireplace range
require additional ventilation into your room. Please consult either your Gazco retailer or the Gazco Technical Information on
our website www.gazco.com to confirm the ventilation required.
Important
Information
Above: Riva2 500 Evoke Glass with Black Glass front and Graphite rear with Vermiculite lining
50