Logic HE Balanced Flue Combined Controls Installation User Instructions

22
Installation Instructions
Foam Seal
(Slide Control Models only)
The foam seal must be fitted to the appliance prior to
attaching the decorative front.
6.12 On the right hand side of the appliance, place the foam
seal in the channel between the glass frame and the slide
control housing, see Diagram 9.
The foam seal must align with the right hand side of the
glass frame and 24mm below the top of the appliance
ange, see Diagram 9.
24
9
Step 1
Step 2
7. Removing the Glass Frame
7.1 Remove the glass frame by unscrewing the 2 lower outer
pozi head screws, see Diagram 10, Arrow A, by several
turns, there is no need to fully remove these 2 screws.
7. 2 Remove the remaining 6 screws, see Diagram 10, Arrow B.
B
B
B B
B
B
A
A
10
7.3 Lift the glass frame clear of the appliance and carefully
place to one side.
8. Arrangement of the Fuel Bed
Advice on handling and disposal
of fire ceramics
The fuel effect and side panels of this appliance
are made from Refractory Ceramic Fibre (RCF), a
material which is commonly used for this
application.
Protective clothing is not required when handling
these articles, but we recommend you follow
normal hygiene rules of not smoking, eating or
drinking in the work area and always wash your
hands before eating or drinking.
To ensure that the release of RCF fibres are kept
to a minimum, during installation and servicing a
HEPA filtered vacuum is recommended to remove
any dust accumulated in and around the appliance
before and after working on it. When servicing the
appliance it is recommended that the replaced
items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF
waste.
RCF waste is classed as stable, non-reactive
hazardous waste and may be disposed of at a
licensed landfill site.
Excessive exposure to these materials may cause
temporary irritation to eyes, skin and respiratory
tract; wash hands thoroughly after handling the
material.