Logic HE Balanced Flue Combined Controls Installation User Instructions

25
8.19 Place the right hand small coal in the recess between the
flame baffle and the front coal, see Diagram 25.
25
8.20 Place the left hand small coal in the recess between the
flame baffle and the front coal, see Diagram 26.
26
8.21 Place the centre rear small coal in the recess behind the
large centre coal, see Diagram 27.
27
8.22 It is essential that gaps are left between the coals to
maximise the performance of the appliance.
9. Fitting the Glass Frame
9.1 Ensure that the fibre glass seal on the box is intact, then
lower the glass frame onto the 2 lower fixing screws, see
Diagram 28, Arrow A.
9.2 Fit the other 6 fixing screws, see Diagram 28, Arrow B.
9.3 Tighten all 8 screws to secure the frame, Diagram 28.
Replace ALL of the securing screws ensuring that a screw
is present in all fixing slots.
B
B
B B
B
B
A
A
28
NEVER OPERATE THE APPLIANCE WHEN THE GLASS
FRAME IS REMOVED OR BROKEN.
Refer to the separate decorative front Instructions to
replace the front on the appliance.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
10. Operating the Appliance
10.1 There are three types of control systems available for this
appliance:
1. Manually Operated Control
2. Remote Control
3. Slide Control
Follow the relevant section for specific operation.
Manual Control
10.2 Locate the control valve on the appliance. It has a single
manual control, see Diagram 29:
Rotate
anti-clockwise
29
Installation Instructions