Logic HE Conventional Flue Combined Controls Installation User Instructions

6.11 Slide it backwards and down behind the side panels to rest

on the rear panel, see Diagram 24.

6.12 Position the flame baffle centrally on the tray and ensure the

stepped lower edge engages against the rear edge of the

burner skin, see Diagram 25.

6.13 Place the front coal centrally in the channel at the front of

the tray. The relationship between the front coal and the

flame baffle is shown in Diagram 26.

6.14 There are three sizes of coal used: 3 x Large, 4 x Small and

1 x Half Moon shaped. For identification, see Diagram 27.

LARGE

HALF MOON

SMALL

Installation Instructions

6.15 Place a single large coal in the right hand dent of the front

coal resting against the flame baffle, see Diagram 28.

6.16 Place a second single large coal in the middle dent of the

front coal resting against the flame baffle, see Diagram 29.

6.17 Place the third large coal next to the first middle coal and

against the flame baffle, Diagram 30.

6.18 Place a small coal directly behind the first large coal, and

rest it on the flame baffle, see Diagram 31.