Icon XS Front For use with the Riva2 & Reflex Ranges Instructions for Use and Installation For use in GB, IE (Great Britain and Republic of Ireland) PR2065 Issue 5 (July 2019)
Installation Instructions Covering following model numbers: Icon XS Black Glass Riva2 400 Riva2 500 Riva2 500HL Riva2 600 Riva2 600HL Riva2 750/ Reflex 75T Riva2 800 Riva2 1050/ Reflex 105 934-120 934-388 934-247 934-447 934-715 934-371 934-325 934-334 1. General 1.1 These instructions are supplementary to, and must be read in conjunction with, the instructions supplied with the appliance. Read both thoroughly before installing the appliance. 1.
Installation Instructions 2. Fitting the Sub-Frame 2.1 Complete the installation of the appliance by following the Installation Instructions supplied with the appliance. 2.2 There are two different fitting methods depending on the appliance purchased. Follow the relevant sections below. RIVA2 1050 & REFLEX 105 ONLY: 2.
. Cleaning the Front 3. Fitting the Front IT IS RECOMMENDED THAT 2 PEOPLE FIT THIS FRONT FOR EASE OF INSTALLATION, PARTICULARLY LIFTING INTO FINAL POSITION. 3.1 Rest the bottom fixing slots on the bottom locating hooks. Lift the upper front fixing slots onto the top locating hooks and lower into final position, see Diagram 5. 5 Ensure the appliance is cold before attempting to clean the front. 4.1 Glass: Use a non-abrasive glass cleaner and soft cloth. 4.