Replacement Part List

ZZZ-212.43200.0831-17.GP.EN.HER HER-HL

Step 9:

Slide the indicated polycarbonate

panels into the spaces between the

rafters, using the top groove of each

rafter. Ensure the side meant to face

the sun is on the outside. Use a

rubber hammer to carefully tap each

panel into the grooves.

Step 10:

Insert the middle roof joints in between the rafters and slide them up under the polycarbonate panels.

Tap lightly to ensure the panel is fully in the slot. Seen from above, most of the joint as well as the

drain holes should be beneath the roof panels.