User guide

9
(6) Set-Up
Install Table 1 and 2.
Insert the notched front part of Table 1 into stud ① and drop
its rear notched part onto stud ②. Insert the plug into the
connector ③.
Caution:
The connector can only be connected one way. Do not force.
Insert the notched front part of Table 2 into stud ④ and drop
its notched rear part onto stud ⑤. Insert the plug into the
connector ⑥.
Caution:
The connector can only be connected one way. Do not force.
Pull the paper eject table out and lift the auxiliary feed table
into position.
A
uxi l i ar
y
f eed t abl e
Paper ej ect t abl
e
Insert the power cord into an outlet.
Caution:
Do not use a power cord other than the one provided.
Insert the power cord into the inlet.
When the power switch is turned on, the stoppers of Table 1
and 2 move to the zero position.