User guide

10
(7) Directions for Use
(A) Standard folding of standard-size paper
407A
1. Turn power switch on.
2. Loosen the paper guide set screw and adjust the
paper guide to fit the width of the paper.
3. Neatly arrange and place it on the feed table with the
printed side up (printed side down in case of fold-out).
4. Adjust paper guide snug with the paper, and
tighten the setscrew.
＜to next page＞
307A
1. Turn power switch on.
2. Raise the paper feed table lever.
3. Loosen the paper guide set screw and adjust the
paper guide to fit the width of the paper.
4. Neatly arrange and place it on the feed table with
the printed side up (printed side down in case of
fold-out).
5. Adjust paper guide snug with the paper, and
tighten the setscrew.
6. Lower the paper feed table lever.
＜ to next page ＞
Paper gui de set scr e
w
Pa p e r g u i d e
Paper f eed t abl e l ever
Paper f eed t abl e
Setting the paper exit roller (307A only):
The exit roller should be moved to the proper position
according to the paper size. Refer to the “Roller
Position Indication” label. If ejection is not
performed properly, try a different position.
Paper gui de set scr e
w
Paper gui de
Paper f eed t abl e