User guide

Set the designated position using the ＋/－ key.

Indication

1 2 3

Standard-size paper C1 C2 C3

Non-standard-size

paper

Setting the designated position

Setting the paper ejection roller for( 307A)

The exit roller should be moved to the proper position

according to the paper size. Refer to the “Roller Position

Indication” label. If ejection is not performed properly, try a

different position.

Fold-Stopper Position Chart

Table 1 Table 2

SINGLE

Original

position

1/2

GATE 1/4 1/2

LETTER 1/3 1/3

ZIGZAG 2/3 1/3

DOUBLE 1/2 1/4

Note:

Calculate the position of table 1 and 2 stoppers in relation to

the measurement value L on page 12.

Example:

In the case of performing the zigzag fold using sheets of paper

300mm in length:

Table 1 = 300 × (2 / 3) = 200mm

Table 2 = 300 × (1 / 3) = 100mm

PARALLEL

FOLD-OUT

3/4 1/4