User guide

7
(4) Designation and Functions of Operations Panel
407A
307A
No.
Designation/Indication Function
①
Fold type key Six fold types can be input and stored.
②
Test key Test folds two sheets without counting.
③
Start/Stop key
Starts and stops machine.
④
Clear/Reset key
Clears the counter / resets after an error.
⑤
Store key Fold position after adjustment is stored.
⑥
Memory 1/2/3 key
Three special fold types are stored. (407A only)
⑦
Select key
Used for selecting the counter, the position of the stopper stud of Table
1 and 2, the position of paper eject roller, and paper length.
⑧
Perforation
m
ode lamp Indicates when the optional perforating unit is installed.
⑨
＋/― key
Used for adjusting the position of the stopper of Table 1 and 2, the
position of paper ejection roller, and paper length
⑩
Speed adjustment key Adjusts speed.
⑪
Numerical key
Used for inputting the number of sheets to be folded and the length
of non-standard size paper
⑫
Counte
r
Shows the number of sheets, the position of the
stopper pin of Table 1 and 2, and paper size.
⑬
Check lamp
Indicates when paper stock runs short, or the location of paper feed
trouble.
⑭
Table 1 stopper move mode
lamp
Indicates when the position of stopper of Table 1 is adjusted.
⑮
Table 2 stopper move mode
lamp
Indicates when the position of stopper of Table 2 is adjusted.
⑯
Pape
r
ejection roller move
lamp
Indicates when the position of the paper ejection roller is adjusted.
(407A only)
⑰
Paper length input mode lamp Indicates when paper length is input (407A only)
⑱
Counter input mode lamp Indicates when reduction is indicated on the counter.
⑲
Paper size input mode lamp Indicates paper size.