Paper Shredder User Manual

IMPORTANT SAFETY INSTRUCTIONS

Your safety as well as the safety of others is important to GBC. In this instruction manual and on the product

are

important safety messages. Read these messages carefully.

The safety alert symbol precedes each safety message in this instruction manual and on the product.

This symbol indicates a potential personal safety hazard that could hurt you or others, as well as cause

product or property damage. Do not connect this unit to electrical power or attempt to operate it before

you have read these operating instructions. Save these instructions for later use.

The following two warnings are found on the bottom of the product:

This safety message means that you could be This safety message means that you could be

seriously hurt or killed if you open the product seriously hurt if you place your hands in the

and

expose yourself to hazardous voltage. discharge shoot.

The following ISO and IEC symbols appear on this The symbols which become illuminated are:

product,

and their meanings are as follows:

Means Power ON

Means OFF

Means REVERSE

This means you should be careful because long hair can become entangled in the cutting head.

This could hurt you.

This means don’t reach into the feed opening of the cutting head. This could hurt you.

This means be careful of ties and other loose clothing which could become entangled in the cutting

head. This could hurt you.

This means you should be careful of loose jewelry which could become entangled in the cutting head.

This could hurt you.

ELECTRICAL SAFEGUARDS

• Unplug your shredder before moving it, emptying the shred bag, or when it is not in use for an extended

period of time.

• Do Not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been

damaged in any manner.

• Do NOT overload electrical outlets beyond capacity as this can result in fire or electrical shock.

• The socket-outlet should be installed near the equipment and shall be easily accessible.

• Do NOT alter attachment plug. Plug configured for the appropriate electrical supply.

!

Means Power ON

Means the shred bin is full

Means the cabinet door is open

Means an overload has occurred

Depress the "R" side of the rocker switch