Instruction Manual

10
3. UNPACKING AND SETUP
3.1 Confirm that all components are present.
Check the items below. Call the supplier if anything is missing.
c BC-10
c Paper Feeder Tray
c Power Cord with two-pronged adaptor (in the Trash Box)
c Trash Box and Card Stacking Box (in the Trash Box)
c Operation Manual and 5 Test Sheets
3.2 Setup
1. Place machine on a stable surface. See the figures.
2. Insert the Paper Feeder Tray along the guide rails until it stops.
3. Attach the two tabs under the Paper Feeder Tray to the brackets of the
machine with provided screws. Make sure the Paper Feeder Tray is securely
fixed to the machine. See Figure 2.
4. Insert the Tr
ash Box and hang the Card Stacking Box on the verge of the Card
Outlet. See Figure 1.
5. Connect the Power Cord to a 120VA
C outlet. If a three-hole outlet is not
available, ground the machine with the attached adaptor.
3.3 Packing Box
Keep the packing box and styrofoam. You may need these to transfer the
machine.
Figure 1
Figure 2
Paper Feeder Tray
Tab
Card Outlet
Bracket
Front Cover