Instruction Manual

3
SAFETY INSTRUCTIONS
If you notice a strange sound or smell while the BC-10 is running,
turn off the Power Switch immediately and remove the plug. Call
your supplier for repair.
Do not expose the BC-10 to rain or wet conditions in order to
avoid fires or electric shock.
Do not remove the transparent cover of the trash box. It is part of
the safety cover of the Slitter Unit, which keeps operator's hands
from being injured while the Card Stacking Box has been
removed.
If a sheet is stuck in the Cutter Unit, jclear the error, kpress the
start button to open the cutter, and lturn off the Power Switch
before removing the paper.
Connect the power cord directly into a wall-mounted outlet of
appropriate voltage. To avoid the risk of fires or electric shock, do
not connect to a multiple outlet strip.
Do not plug into an outlet of a voltage that is different from the
one marked on the serial tag. Operating on an incorrect voltage
can cause fires or electric shock.
Do not connect or disconnect the power cord with wet hands in
order to avoid electric shock or fires.
To avoid the risk of fires or electric shock, do not abuse the power
cord. Do not jput excessive weight on the cord, kpull without
holding the plug, lbend excessively, or mmodify the cord.
DANGER