User Manual

Activating the Unlock Relay
- Input the Unlock Password on your mobile device while it is connected to the
IP Doorbell. The Unlock duration time is set separately in the App of each
connected mobile device.
- On Android Devices, the ‘Auto Unlock’ feature can be enabled to allow for the
simple pressing of the ‘key’ icon to activate the relay (no code required).
Monitoring the IP Doorbell
- From the ‘Devices’ page of the ControlCam App, tap on the image of the IP
Doorbell you would like to connect with.
- To hear audio from the IP Doorbell, the ‘headphones’ icon must be highlighted
in orange (tap to change).
- The smaller ‘mic’ icon must be highlighted in orange (tap to change) to enable
the push-to-talk function of the larger ‘mic’ icon.
Capturing a Still Image
- Tap the ‘camera’ icon to store a still image from the IP Doorbell. This will be
stored as a snapshot with a timestamp directly to your mobile device.
- Playback can be achieved by tapping the ‘. __’ icon in the upper right corner of
the ‘Devices’ page in the ControlCam App, and then tapping ‘Video capture
file’ to show the list of stored snapshots and videos.
Recording a Video Image
- Tap the ‘video’ icon to start recording a video from the IP Doorbell. Press the
‘video’ icon again to stop recording. This will be stored as a video with a
timestamp directly to your mobile device.
- Playback can be achieved by tapping the ‘. __’ icon in the upper right corner of
the ‘Devices’ page in the ControlCam App, and then tapping ‘Video capture
file’ to show the list of stored snapshots and videos.
Modifying App Settings
- From the ‘Devices’ page in your ControlCam App, tap on the ‘…’ icon beside
the image of the IP Doorbell you wish to adjust. To be able to edit ‘Device
Name’, ‘GID’, ‘User Name’, or ‘Password’ settings, you must turn off the
‘Outdoor Call-in’, and then tap ‘Edit’. Then you can change these settings:
o Device Name: Enter a name that you want to use to define this specific
IP Doorbell. This name will show in the ControlCam notifications to
your mobile device. *Android devices will not accept spaces or other
special characters in the name. iOS devices do allow special characters
o GID: You can manually enter or update the GID number of your IP
Doorbell.
o User Name: This will stay as ‘admin’
o Password: The password entered here must match the password
programmed in the IP Doorbell through either the Web Server or the
latest unlock password set in the ControlCam App.
- From the ‘Devices’ page in your ControlCam App, tap on the ‘…’ icon beside
the image of the IP Doorbell you wish to adjust. These settings can be changed