User's Manual

9-2
Double-Sided (Duplex) Printing
The Elite 21 printer has the ability to print on both sides of the page, provided
that the Duplex Unit is installed. The Duplex Unit ships standard with the Elite
21 DN and Elite 21 SE models and can be added as an option to the Elite 21 N
model.
To send a double-sided print job to the printer, follow these steps:
Macintosh:
• Open the document you wish to print. Go to the File menu and then down to Print.
• Click on the General pull-down menu and go down to Layout.
• Click on “Print on Both Sides:” and select the icon for the appropriate binding method (long
edge or short edge).
• Set any other print options for the job to the desired settings, and click Print to send the job.
Windows 95/98:
• Open the document you wish to print. Go to the File menu and then down to Print.
• Click on the Properties button in the Print window.
• Click the “Paper” tab in the Properties window, and click the “More Options...” button at the
lower left of the Paper window.
• Under the More Paper Options window, set “Print on Both Sides” from None to the correct
binding method (long edge or short edge).
• Click OK to accept, then Apply and OK to return to the Print window. Set any other print
options for the job to the desired settings, and click OK to send the job.
Windows 2000:
• Open the document you wish to print. Go to the File menu and then down to Print.
• Click on the Layout tab at the top of the Print window.
• Set “Print on Both Sides” from None to the correct binding method (long edge or short edge).
• Set any other print options for the job to the desired settings, and click Print to send the job.
Windows NT 4.0:
• Open the document you wish to print. Go to the File menu and then down to Print.
• Click on the Properties button in the Print window.
• Click the “Page Setup” tab in the Properties window.
• Set “Print on Both Sides” from None to the correct binding method (long edge or short edge).
• Click OK to accept and return to the Print window. Set any other print options for the job to
the desired settings, and click OK to send the job.